Advertisement
Quick Links
Manual › INFINITY UNIVERSAL › 11885 + 12006
EN . Scope of delivery
D 2x
II
I
B
EN . Aligning the luggage rack
EN
02
Place the luggage rack (A) on
the bicycle frame and roughly
align it.
1.
K 1x
F
TX25
III
A
Please note. Ensure sufficient
distance to the saddle, brake
and rear wheel. The luggage
rack must not block any cables.
If necessary, pull apart/com-
press struts to fit rack to width
of seat stays.
A
C
> 1 , 5
c m
EN . Prepare luggage carrier
EN
01
Bring luggage carrier (A) into
mounting position by folding out
frame adapter (B).
mounting position.
B
EN
03
Remove the luggage rack (A)
again and stick transparent pro-
tective foils (D) onto the frame at
the support points.
1.
GERMANY
ALLROAD
Tip: If necessary, slightly
loosen screws I - III to facilitate
alignment.
A
1.
2.
Please note. The subsurface
must be clean and free of
grease.
D
L
L
2.
ROAD
MOUNTAIN
2x
3.
L
D
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for sks INFINITY UNIVERSAL
Summary of Contents for sks INFINITY UNIVERSAL
- Page 1 Manual › INFINITY UNIVERSAL › 11885 + 12006 ALLROAD ROAD MOUNTAIN EN . Scope of delivery EN . Prepare luggage carrier Tip: If necessary, slightly D 2x Bring luggage carrier (A) into loosen screws I - III to facilitate mounting position by folding out alignment.
- Page 2 Manual › INFINITY UNIVERSAL › 11885 + 12006 ALLROAD ROAD MOUNTAIN EN . Mounting the luggage rack Please note. Wiggle the straps Please note. Tighten the screw Place the luggage rack (A) on slightly to the right and left Pull the straps (E) down with (IV) with 3 Nm.
- Page 3 Manual › INFINITY UNIVERSAL › 11885 + 12006 ALLROAD ROAD MOUNTAIN Please note. Tighten the screws Please note. Tighten the Tighten the screws (I) in the (I) with 5 Nm. Tighten the screws (II) on screws with 5 Nm. frame adapters (B) to fix the the luggage rack.
- Page 4 • Injury hazard. The product contains small parts that could be swallowed. Keep the product or individual components away from children. • Always mount the INFINITY UNIVERSAL luggage rack using the mounting material supplied. Do not block any cables on the bicycle frame with the support points or tensioning straps.
Need help?
Do you have a question about the INFINITY UNIVERSAL and is the answer not in the manual?
Questions and answers