AC Infinity CLOUDLINE S Series Manual
  1. Manuals
  2. Brands
  3. AC Infinity Manuals
  4. Laboratory Equipment
  5. CLOUDLINE S Series
  6. Manual
AC Infinity CLOUDLINE S Series Manual

AC Infinity CLOUDLINE S Series Manual

Air filtration system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CLOUDLINE
AIR FILTRATION SYSTEM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CLOUDLINE S Series and is the answer not in the manual?

Questions and answers

Related Manuals for AC Infinity CLOUDLINE S Series

Summary of Contents for AC Infinity CLOUDLINE S Series

  • Page 1 CLOUDLINE AIR FILTRATION SYSTEM...
  • Page 3 WELCOME Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com and click contact for our contact information. EMAIL LOCATION support@acinfinity.com...
  • Page 4 MANUAL CODE AFK2403X1 MODEL UPC-A PRODUCT Air Filtration System 4", S-Series AC-FKS4 819137022065 Air Filtration System 6", S-Series AC-FKS6 819137021891 AC-FKS8 819137022072 Air Filtration System 8", S-Series AC-FKT4 819137022911 Air Filtration System 4", T-Series AC-FKT6 819137022928 Air Filtration System 6", T-Series Air Filtration System 8", T-Series AC-FKT8 819137022980...

  • Page 5: Table Of Contents

    Adding More Devices ..............Page 40 Cleaning ..................Page 42 Programming ................. Page 45 Download the App ................. Page 47 Add a Device ................. Page 48 ....................Page 55 Other AC Infinity Products ............Page 58 Warranty ..................Page 59...

  • Page 6: Product Warning

    PRODUCT WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Ensure your power source conforms to the electrical requirements of this product. Check your local code restrictions for additional safety measures that may be needed for a proper code compliant installation.

  • Page 7: Interference From Mh And Hps Lights

    INTERFERENCE from MH and HPS LIGHTS Certain grow light models with HID* ballasts that do not use electromagnetic shielding will create an area of radio frequency interference (RFI). This can distort nearby frequency-sensitive components like internet lines and climate sensors. RFI can be emitted from the ballast’s cords or the ballast itself.

  • Page 8: Key Features

    KEY FEATURES DUAL BALL BEARINGS ACTIVATED CARBON POWERED BY The motor contains ball Features RC412 1200+ IAV Sets environmental triggers bearings with a 67,000 hour Australian charcoal with high and time-based controls while lifespan. Enables the fan to be adsorption rate to completely refining its own programming mounted in any orientation.

  • Page 9: Product Contents

    PRODUCT CONTENTS CLOUDLINE S-Series SPEED WOOD SCREWS CONTROLLER CONTROLLER (WALL HANG) PLATE BOLTS (x1) (x1) (x2) CLOUDLINE T-Series CONTROLLER SENSOR POWER WOOD SCREWS CONTROLLER CABLE CENTRAL HUB PROBE ADAPTER (WALL MOUNT) PLATE BOLTS DOCK (x1) (x1) (x1) (x2) (x2) (x1) FAN UNIT DUCT FAN WIRE...
  • Page 10 PRODUCT CONTENTS...

  • Page 11: Installation: Mounting

    INSTALLATION MOUNTING STEP 1 Unscrew and loosen the metal rings using a Phillips screwdriver and pliers. STEP 2 Remove the motor box from the flange bracket. Remove the wind circle between the motor box and the intake flange.
  • Page 12 INSTALLATION MOUNTING STEP 3 Use the flange bracket to set your desired fan position. Mark the four mounting holes. STEP 4 Drill four holes into the marked locations. Make sure your mounting area is structurally sound and free from obstruction.
  • Page 13 INSTALLATION MOUNTING STEP 5 If you are mounting onto anything other than a wood support or stud, insert the included four wall anchors into the drilled mounting holes. You may need to use a hammer to secure them through the holes. STEP 6 Align the flange bracket’s holes with the wall anchors.
  • Page 14 INSTALLATION MOUNTING STEP 7 Place the wind circle back into the intake flange and reposition the metal clamps over the flanges if applicable. STEP 8 Slide the motor box back into the flange bracket, making sure its airflow arrow is pointing in the same direction as the flange bracket’s arrow.
  • Page 15 INSTALLATION MOUNTING STEP 9 If installing ducting, use the included duct clamps to secure it to either end of the duct fan, making sure there is a tight seal. Tighten the duct clamps using a flathead screwdriver.

  • Page 16: Installation: Hanging

    INSTALLATION FAN HANGING - STRAPS STEP 1 Loop the strap around the bracket and a pole. STEP 2 Slip the strap through the inner ladder lock slot from the bottom.
  • Page 17 INSTALLATION FAN HANGING - STRAPS STEP 3 Route the strap into the outer ladder lock slot from the top. Adjust the length of the completed loop as needed. STEP 4 Tuck the loose end through the center gap of the ladder lock to secure the loop.
  • Page 18 INSTALLATION FAN HANGING - STRAPS STEP 5(a) - Hanging Downward Let the fan hang by the pole once the straps are secure. Make sure the fan's airflow arrow is pointing towards your desired direction. STEP 5(b) - Hanging Upward To hang the fan right-side up, loop and tighten the straps, as shown in steps 1-4, around the pole.
  • Page 19 INSTALLATION FILTER HANGING - STRAPS STEP 1 Loop the strap around a hanging pole. STEP 2 Slip the strap through the inner ladder lock slot from the bottom.
  • Page 20 INSTALLATION FILTER HANGING - STRAPS STEP 3 Route the strap into the outer ladder lock slot from the top. Adjust the length of the completed loop as needed. STEP 4 Tuck the loose ends through the center gap of the ladder lock to secure the loop.
  • Page 21 INSTALLATION FAN HANGING - ROPE CLIPS HANGING UPWARD Loop the two rope hangers around a pole and clip the carabiners onto each other. Shorten the loops as needed. Hang the fan by the duct flanges to secure it. NOTE: The motor cap may be rotated to appear right side up in grow applications. See page 24 to learn how to rotate the motor cap.
  • Page 22 INSTALLATION FILTER HANGING - ROPE CLIPS STEP 1 Loop the rope clip hangers around your grow tent's support beams. STEP 2 Hook the carabiners into the steel hooks located on the flanges.
  • Page 23 INSTALLATION FILTER HANGING - ROPE CLIPS STEP 3 Connect your filter to your ductwork using your preferred method, as shown on page 26.

  • Page 24: Installation: Motor Cap Orientation

    INSTALLATION MOTOR CAP ORIENTATION STEP 1 Unscrew the motor cap using a screwdriver. STEP 2 Rotate the motor cap to your desired orientation. Reapply the screws. Rotating the motor cap will not void your warranty.

  • Page 25: Installation: Configuration Setup

    INSTALLATION CONFIGURATION SETUP INTAKE AND EXHAUST This fan can be used as either an intake fan or an exhaust fan in grow rooms and larger grow tents. To achieve optimal whole space ventilation, the intake fan or opening - if not using a fan - must be situated at a bottom corner of your grow space.
  • Page 26 INSTALLATION CONFIGURATION SETUP STEP 1 Connect your duct tube over your filter. Use duct clamps to secure the connection. You may also apply ducting tape before using the duct clamps for further security. STEP 2 You may also connect your filter directly to your inline duct fan.
  • Page 27 INSTALLATION CONFIGURATION SETUP PREFILTER When placing your filter inside your grow space, slip the cloth over your filter to block dust and other particles from passing through. Make sure the entire metal mesh is covered by the cloth. INTERIOR HANGING To use your filter in intake applications, place it inside your grow space.

  • Page 28: Powering And Setup

    POWERING AND SETUP S-SERIES STEP 1 Use the included UIS M-M extension cord to connect the fan to the speed controller’s port at the bottom. Plug the UIS connector with the gasket end into your fan. The gasket is specially designed to protect against liquids and dust.
  • Page 29 POWERING AND SETUP T-SERIES STEP 1 Plug the sensor probe into the controller’s sensor port. Set the probe near your plants in your grow tent for the most accurate reading. Keep the probe cord away from your HID* grow light ballast's power cord to ensure the controller properly detects climate conditions.
  • Page 30 POWERING AND SETUP T-SERIES STEP 3 Use the included UIS M-M extension cord to connect your device’s UIS connector into one of the controller’s ports. Plug the UIS connector with the gasket end into your fan. The gasket is specially designed to protect against liquids and dust.

  • Page 31: Controller Mounting

    CONTROLLER MOUNTING S-SERIES STEP 1 — WALL MOUNTING Locate a spot free of obstruction and secure the anchor into your wall. Twist the wood screw into the anchors. STEP 2 — WALL MOUNTING Hang the controller by the screw using the hole on the backside.

  • Page 32: Magnet Mounting

    CONTROLLER MOUNTING S-SERIES MAGNET MOUNTING Mount the controller on a steel surface using the magnet located behind the label. PLATE MOUNTING* Screw the controller bolts into the slot or mounting holes at the upper half of the plate. Hang the controller by the bolts using the hole on the backside.
  • Page 33 CONTROLLER MOUNTING T-SERIES STEP 1 — WALL MOUNTING Locate a spot free of obstruction and secure the anchors into your wall. Twist the wood screws into the anchors. STEP 2 — WALL MOUNTING Hang the controller by the screws using the holes on the backside.
  • Page 34 CONTROLLER MOUNTING T-SERIES MAGNET MOUNTING You may also mount the controller onto a steel surface using the magnet located behind the label. PLATE MOUNTING* Screw the bolts into the slot or mounting holes at the upper half of the plate. Hang the controller by the bolts using the holes on the backside.
  • Page 35 CONTROLLER MOUNTING T-SERIES CORD ARRANGEMENT Cords may be routed through the included cable dock, which has an adhesive backing for mounting on any surface.

  • Page 36: Uis Tm Platform

    By creating this fully integrated system, you can power and program all your devices together or separately for optimized grow tent management. Your grow system can be regulated using your controller hub or remotely on the AC Infinity app (paired with compatible controllers), where you will have access to automation programming and climate data.

  • Page 37: Compatibility

    COMPATIBILITY PLATFORM MOLEX ADAPTER* Use a Molex adapter to plug inline fans with 4-pin Molex connectors into this controller. Plug your fan's Molex connector into the adapter. Then plug the adapter into the controller. UIS M - 4PIN F ADAPTER EXTENSION CABLE Use male-to-male UIS extension cords to connect devices with female UIS ports at an extended range from your controller.
  • Page 38 COMPATIBILITY CONTROLLER Older generation models that previously used DC motors now contain EC motors in updated builds. Whereas fans that use DC motors connect to its controller to receive power, fans that use EC motors connect to electrical sockets to receive power. Neither the fan nor the controller is backwards compatible with the same product of an older generation that use DC motors and older controllers.

  • Page 39: Adding More Fans

    ADDING MORE FANS The CONTROLLER AI+ is built with eight ports that enable you to power and simultaneously control multiple fans at the same time. Compatible with inline fans with EC motors only. See image below for a sample configuration. Multi-Fan Connection...

  • Page 40: Adding More Devices

    ADDING MORE DEVICES EXTENDING THE CHAIN Plug the male end of the splitter* into your UIS controller. Connect a UIS device or power adapter to the first port of each tier to power your controller and the hub. Ports 2-4 can connect to additional splitters or UIS devices.

  • Page 41: Daisy Chaining

    ADDING MORE DEVICES DAISY-CHAINING Each of the included controller’s ports can support up to 20 devices using a daisy-chain adapter (not included). All devices must be from the same series but can be of differing sizes. Plug the male end of the daisy-chain adapter into your device. Connect your UIS controller to the daisy-chain adapter’s INPUT port using a M-M connector cord.

  • Page 42: Cleaning

    CLEANING INLINE FAN STEP 1 Remove the motor box from the mounting flange. Refer to steps 1 and 2 on page 11 to learn how to remove the motor box. STEP 2 Use a damp cloth to clear the impeller and fan blades of any dust and debris.
  • Page 43 CLEANING INLINE FAN STEP 3 Clear the stator blades of any dust and debris on the opposite end. Clean the area inside the output and exhaust flanges. STEP 4 Secure the motor box onto the mounting flanges. Refer to steps 7-9 on pages 14-15 to learn how to secure the motor box.
  • Page 44 CLEANING CARBON FILTER REVERSING THE FLANGES To extend the filter's lifespan and utilize its entire carbon bed, rotate the flanges from either end. Remove the screws from the flanges to release them from the filter. Replace the flanges on the other ends and screw them back into place.

  • Page 45: Programming

    PROGRAMMING S-SERIES FAN SPEED ADJUSTING The controller features a single button that controls the fan speed from 0-10. Pressing the speed button increases the fan speed in one unit increments. Pressing the button at the 10 setting will set the fan speed back to 0. Fan Speed Indicator POWERING ON/OFF...

  • Page 46: Webpage Overview

    PROGRAMMING T-SERIES WEBPAGE OVERVIEW CONTROLLER Read through this For in-depth programming instructions, instruction guide to refer to the included CONTROLLER AI+ easily explore all that your Quick Start Guide. The following resources controller has to offer. are also available for further assistance.

  • Page 47: Download The App

    Open the smart phone camera and scan the QR code below to download the AC Infinity app. Please visit our website at www.acinfinity.com for more information on the AC Infinity app. Please note: The AC Infinity App’s appearance and features are subject to change, and please refer to our website/ QR for the latest instructions.

  • Page 48: Add A Device

    ADD A DEVICE BLUETOOTH SETUP AND PAIRING Power your device on before pairing your controller with the app. Logging in or creating an account beforehand will expedite the pairing process. Have your Wi-Fi network's name and password ready. Tap on the “+” tab to add your Select "Smart Controllers".
  • Page 49 ADD A DEVICE BLUETOOTH Select CONTROLLER AI+. Hold the port button for 5 seconds to activate Bluetooth. Wait for the Bluetooth icon to start flashing on your controller’s screen to release the button.
  • Page 50 ADD A DEVICE BLUETOOTH Connect using Bluetooth. To connect Connecting with Bluetooth will using Wi-Fi, skip to step 8. disable Wi-Fi functionality. Go to the app settings page to re-enable and connect using Wi-Fi. When pairing the app around multiple controllers, move your mobile device closer to your desired controller.
  • Page 51 ADD A DEVICE BLUETOOTH Tap the DONE button to complete the pairing process.
  • Page 52 ADD A DEVICE WI-FI Repeat steps 1-5. Log in or Enter your Wi-Fi network's password. create an account to continue. You may also connect to an alternate 2.4 GHz router*. When pairing the app around multiple controllers, move your mobile device closer to your desired controller.
  • Page 53 ADD A DEVICE WI-FI Tap the DONE button to complete Follow these tips if the pairing the pairing process. process is unsuccessful. DONE *This controller is only compatible with 2.4 GHz frequency band routers. When connecting using Wi-Fi, make sure your mobile device is not connected to a 5 GHz frequency band network.
  • Page 54 ADD A DEVICE WI-FI Your controller will appear in your smart device with a unique ID. I-I000I...

  • Page 55: Faq

    What devices are compatible with CONTROLLER AI+? All AC Infinity devices that contain a UIS connector are compatible. If your AC Infinity device has a 4-pin Molex connector and an EC motor, it may still be compatible with the use of a UIS adapter to convert its connector to fit with the controller.
  • Page 56 CONTROLLER + FAQ My controller isn't pairing with the app. How do I fix this? If the pairing process isn't successful, press any button to return to the normal screen. Then hold the port button for 5 seconds to try again. When starting the pairing process around multiple Wi-Fi controllers, move your smart device closer to the controller you wish to connect the app with.
  • Page 57 CLOUDLINE FAQ Can I mount this inline duct fan vertically? Yes. The CLOUDLINE fan can be mounted in any orientation, including vertically. Will I be able to hardwire this fan to my own controller or thermostat? We do not recommend hardwiring or splicing our fan's power wires. Such modifications may compromise electrical safety and will void this product's warranty.

  • Page 58: Other Ac Infinity Products

    150 lb. weight capacity. Includes a mounting plate to install your AC Infinity controller onto. Inline Duct Fans The CLOUDLINE series is a line of duct fans designed to quietly ventilate AV rooms and closets, as well as various DIY air circulation and exhaust projects.

  • Page 59: Warranty

    WARRANTY This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues.
  • Page 60 No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.
  • Page 64 www.acinfinity.com...

This manual is also suitable for:

Cloudline t seriesCloudline ac-fks4Cloudline ac-fks6Cloudline ac-fks8Cloudline ac-fkt4Cloudline ac-fkt6 ... Show all

Table of Contents