Advertisement
Quick Links
Advertisement
Related Manuals for Remigo RemigoOne
Summary of Contents for Remigo RemigoOne
- Page 1 Remote Control User Manual...
- Page 2 Acknowledgement Thanks for choosing RemigoOne electric outboard. We will do our best to make boating for you as easy as possi- ble. We are dedicated to providing the ultimate user experience. High-performance technology, durable construction and reliable lithium batteries are just a part of that. Even though we designed your new outboard with it’s accessories to be as intuitive as possible, we ask you to read this user manual thoroughly to understand...
-
Page 3: Product Identification
You’ll find an ID label with serial number on the product. Copy of the label is included in the Warranty papers. To invoke the warranty and other after-sale services please contact us at support@remigo.eu and make sure to include it in your message. - Page 4 Your Remigo Remote Control Package includes: › Remote control unit › Handle › Handle pin › Packet of threadlock glue › Black floating wristband › User manual Unpack the package and check if there was any damage caused during the transport.
- Page 5 Remote Control Parts LED 1: Connection status indicator 2. Forward button > adding speed 3. Reverse button > reducing speed 4. LED 2: Battery status indicator 5. Adapter 6. USB-C charging port 8. Handle 9. Handle Pin...
- Page 6 Turning Remote Control On/Off Power On: Press and hold any button on the remote control for 1 second. LED 1 indicates the connection status (1.) LED 2 indicates the battery status (2.) Power Off: The remote control will automatically power off after 10 seconds of inactivity when there is no connection with the motor (e.g., killswitch removed, motor out of range, etc.).
- Page 7 Indicators LED 1: Connection Status Indicator Blinking Blue: Connected to the motor. Blinking Orange: Not connected to the motor. LED 1 LED 2: Battery Status Indicator Battery Status: After turning on the remote control, LED 2 displays the battery charge level (SOC): SOC >...
- Page 8 Operating the Remote Control The remote control buttons function identically to the buttons on the outboard: Starting the Motor: Press the button corresponding to the desired direction. Adjusting Power: Press the same button again to increase power (up to 10 levels). To decrease power, press the opposite button.
- Page 9 Mounting The Remote Control easily attaches and detaches from the Handle or Cap, using a secure magnetic coupling. While the Remote Control is attached to the handle, you can rotate it to snap into three different positions. This lets you adjust the position of the speed control buttons for maximum comfort, no matter which side of the outboard you’re steering from.
- Page 10 Connectivity type The remote control connects to the RemigoOne motor via a reliable WiFi protocol. Charging Charge via the USB-C port (charger not included).
- Page 11 If the case is significantly damaged or the seal is broken, stop using the remote immediately to prevent water ingress. Keep the damaged device away from flammable materials and contact Remigo Support for further assis- tance.
- Page 12 2. Unscrew the set screw from the existing handle on the tiller. To remove it, use a 4mm hex tool, one was provided with the purchase of the RemigoOne. 3. Slide off the black plastic handle from the tiller rod and slide on the new one on the same place - this should be done without any force.
- Page 13 : https://remigo.eu/ info@remigo.eu +386 41 769 489 Remigo d. o. o. Stanežiče 27e 1210 Ljubljana - Šentvid Slovenia, EU Remigo Remote Control User Manual / February 2025 V 1.1 Copyright © 2024 Remigo, d.o.o. All Rights Reserved...
Need help?
Do you have a question about the RemigoOne and is the answer not in the manual?
Questions and answers