GEHA COMPACT 219 Manual page 41

 Use of Keystone is
not recommended.
Image is out of focus
Make sure the lens cap is removed.

Adjust the Focus Ring on the projector lens.

Make sure the projection screen is between the required distance

3.9 to 39.4 feet (.2 to 2.0 meters) from the projector.
See page 6.
The image is stretched when displaying 6:9 DVD title
When you play anamorphic DVD or 6:9 DVD, the projector will

show the best image in 6:9 format on projector side.
If you play 4:3 format DVD titles, please change the format to 4:3

in the projector OSD.
If the image is still stretched, you will also need to adjust the

aspect ratio by referring to the following:
Please setup the display format as 6:9 (wide) aspect ratio type

on your DVD player.
Image is too small or too large
Adjust the Zoom Ring on the top of the projector.

Move the projector closer to or further from the screen.

Press "MENU" button on the remote control or projector panel, go

to "Display  Format" and try the different settings.
Image has slanted sides
If possible, reposition the projector so that it is horizontally

centered on the screen and below the bottom of the screen.
Press "Keystone +/-" button on the remote control or press "

" on the projector panel, until the sides are vertical.
Image is reversed
Select "SETUP  Projection" from the OSD and adjust the

projection direction.
Appendices
/
4
English