Advertisement
Quick Links
Operation and
Maintenance Manual
Salon Series
Congratulations!
You are moments away from fresher, cleaner indoor air. Your new AllerAir unit will combat many of the
chemicals, gases, odors and particles responsible for poor indoor air quality (IAQ). Poor IAQ may cause
or worsen allergies, asthma, multiple chemical sensitivities (MCS) and sick building syndrome. We
recommend proper maintenance of your unit to keep it running efficiently for years to come.
Operation:
All units except D and DX models are shipped fully assembled and ready for use. (D and DX model owners
may refer to their additional instruction sheet for filter installation, or refer to Page 3 of this booklet.)
Note:
As original packaging is required for warranty returns,
new AllerAir owners are advised to keep boxes and
shipping materials.
Model No. ___________________
Serial No.
___________________
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AllerAir Salon 5000
Summary of Contents for AllerAir Salon 5000
- Page 1 Salon Series Congratulations! You are moments away from fresher, cleaner indoor air. Your new AllerAir unit will combat many of the chemicals, gases, odors and particles responsible for poor indoor air quality (IAQ). Poor IAQ may cause or worsen allergies, asthma, multiple chemical sensitivities (MCS) and sick building syndrome. We recommend proper maintenance of your unit to keep it running efficiently for years to come.
- Page 2 Children should be supervised to ensure that they do not play with the appliance. Do not operate any unit with a damaged cord or plug. Discard unit or return to AllerAir for examination and/or repair. Do not run cord under carpeting and do not cover it up in any way. Do not place cord under furniture or appliances.
- Page 3 Filters must be installed before turning the unit on in order for it to work. AllerAir technicians recommend removing the base, installing the filter, and replacing the base according to steps 1 - 4 and 12 - 16 of the following procedure.
- Page 4 Replace the base, making sure the STEP 4. arrow on the gold sticker lines up with unit's rear seam. STEP 15 STEP 16 Replace the four screws. Turn the unit back onto its wheels. It is now ready for use. · AllerAir 1.888.852.8247 · info@allerair.com...
- Page 5 Salon Series HEPA & CARBON FILTERS ORDER GUIDE These replacement filters will extend the life of your AllerAir unit. Please be sure to follow the instructions for changing the filters in your unit. We recommend changing pre-filters every two months, HEPA filters every three to five years, and carbon filters every two years.
- Page 6 Operating and Maintenance Manual REFILLING THE CARBON CANISTER Your AllerAir unit contains a refillable carbon filter. You may choose to refill it* or simply purchase a new filter. Tools Required: Philips screwdriver, garbage bag large enough to hold all of the old carbon, rubber mallet.
- Page 7 Replace the filter end plate. end plate. Make sure it is not Replace the screws, filter(s) touching any of the and top with the 4 screws. other components. IMPORTANT! UV SYSTEMS NOT AVAILABLE IN CALIFORNIA. Visit our clean air news blog: https://www.allerair.com/blogs/clean-air-news-blog...
-
Page 8: Ten Year Limited Warranty
This warranty does not cover damage, fault or failure due to alteration or repairs made by anyone other than AllerAir or the use of supplies and acccessories other than those manufactured by AllerAir. This warranty is provided to the original purchaser and may not be transferred.
Need help?
Do you have a question about the Salon 5000 and is the answer not in the manual?
Questions and answers