ORANGE SPV C550 Manual page 112

Smartphone User Manual
112
6. Enter the same PIN on the other device.
7. If desired, enter the name of the other device in the Name
To accept a bond:
1. Make sure that Bluetooth is turned on and in Discoverable
2. When prompted to bond with the other device, select
3. In the PIN field, enter a PIN of between 1 and 16 characters,
4. Optionally, you can enter the name of the device requesting
5. Select Done. The bond is now created. You can now
To delete a bond:
1. Select Settings > Bluetooth > Bluetooth from the Start
2. Select Devices from the menu.
3. Select the bond you want to delete, then select Delete
NOTE: Select Settings > Bluetooth > Bluetooth Setting
to enter a name for your device; to enable/disable Beam
Authentication requirements; or to perform ActiveSync setup
(bond with other Bluetooth device which supports serial port
or ActiveSync profile as your ActiveSync partner).
field, and select Done.
mode.
Yes.
and select Done. You must enter the same PIN that was
entered on the device requesting the bond.
the bond in the Name field.
exchange information with the other device.
menu.
from the menu.