Advertisement
Quick Links
Quick Start
Thank you for purchasing an
AnglerFish, the performance
packable fishing kayak. See full
instructions at pakayak.com/
assembly/AnglerFish
Easy as 1, 2, 3:
1. Unpack & latch
Unzip bag and lay flat. Remove 3 top
pans, seat and cart from stacked
sections. Slide hull sections apart
and line them up on bag, bow to
stern. Latch all 17 clamps.
IMPORTANT!
•
Remove any debris from gaskets before assembling.
•
The clamps have a self-locking tab. Be sure the self-locking tab is engaged when clamp is latched.
•
To unlatch clamps, push self-locking tab back and pull up on black handle.
•
Make sure all 17 clamps are locked.
Tip: Watch the assembly video at pakayak.com/assembly/AnglerFish and for more tips, go to pakayak.com/quick-start/AnglerFish
Keep:
Keep the box and all packing materials in case you need to return your Pakayak product.
Try:
We recommend that you assemble your Pakayak on a carpeted surface inside or on a soft surface, like a blanket on the grass, and test
out the fit and feel before you try it in the water. When you test it in the water, carefully set it in the water and be sure not to rub or drag it
against any rough surfaces. If your Pakayak product is scratched or gouged, it will not be eligible for return and refund.
More:
Visit pakayak.com/pak-members for all kinds of information and help. Get to know your boat, how to assemble and disassemble,
recommended care instructions and download the Owner' s Manual. If you have any issues with your kayak, email us at support@pakayak.com.
Bulkhead
Section 4
2. Add Seat Support
Remove the 4 seat supports
attached with velcro and sleeve
them together to make a box-
like structure over the center
connection area.
Welcome to the PAK!
®
www.pakayak.com
Section 2
Section 3
3. Strap down & go
Place section 2 top pan onto its hull
section, then the middle, then the stern.
Secure all of the rubber straps. Place the
chair in 1 of 3 positions and fasten the
webbing buckles around the front bar.
Buckle the cart to the bag.
Bulkhead
Section 1
Advertisement
Related Manuals for Pakayak AnglerFish
Summary of Contents for Pakayak AnglerFish
- Page 1 Try: We recommend that you assemble your Pakayak on a carpeted surface inside or on a soft surface, like a blanket on the grass, and test out the fit and feel before you try it in the water. When you test it in the water, carefully set it in the water and be sure not to rub or drag it against any rough surfaces.
- Page 2 Place chair flat, top toward cart and rear rung at end of section 3 top pan. Place stern top pan over chair, straight end toward cart. Zip up, cinch straps and roll away. Tip: Watch the disassembly demo at pakayak.com/disassembly/AnglerFish More Information Go to pakayak.com/pak-members for more tips, guidelines, instructional videos and other information. www.pakayak.com...
Need help?
Do you have a question about the AnglerFish and is the answer not in the manual?
Questions and answers