Advertisement
Quick Links
Advertisement
Related Manuals for Alarm.Com ADC-NK-200T-A-NB
Summary of Contents for Alarm.Com ADC-NK-200T-A-NB
- Page 1 Alarm.com Hub Installation Guide ADC-NK-200T-A-NB...
- Page 2 In the box Alarm.com Hub AC power Ethernet Installation Wall mount Wall adapter cable guide screws* mount* *Only included with certain models.
-
Page 3: Install The Hub
❷ When the LED turns solid white, ❸ continue the setup process. The Hub may take up to five minutes to connect ❻ with the Alarm.com cloud. ❼ ❹ ❺ Shades Irrigation... -
Page 4: Complete The Installation
❹ ❸ • The Hub beeps and the status light turns Continue triggering Z-Wave devices. Securely fasten the Hub in the mounting Add Z-Wave devices solid green after a device has been Multiple devices can be added to the bracket so that the DC connecter holder successfully added to the network without re-entering Add Mode. -
Page 5: Troubleshooting
Unsuccessful Alarm.com until the status light starts blinking red Delete Z-Wave Troubleshooting cloud connection to return to Delete mode (approximately 3 seconds). devices from the Hub ❶ Power cycle the Hub to establish a Unable to add a device network connection to the Delete a Z-Wave device using the Alarm.com cloud. - Page 6 Sweeping pattern white Full factory reset Attemping to establish connection with Sweeping pattern green Loading pattern purple Alarm.com cloud Adding Z-Wave device to network Hub’s software is updating A factory reset returns the Hub to factory settings and resets the Z-Wave network.
- Page 7 This equipment of the device. The Alarm.com Hub has a built-in microphone, which is turned generates, uses and can radiate radio frequency energy off by default. The microphone does not currently capture or and, if not installed and used in accordance with the Le présent appareil est conforme aux CNR d’Industrie...
- Page 8 Notes...
- Page 9 8281 Greensboro Drive © 2022 Alarm.com. All rights reserved. Suite 100 220412 | Assembled in the USA. Tysons, VA 22102 900-00001-001 Rev C...
Need help?
Do you have a question about the ADC-NK-200T-A-NB and is the answer not in the manual?
Questions and answers