Table of Contents
Advertisement
Programming RDS stations
(IS function)
6
A/F
TP
AS
AS
SCN
With the push of a button you may store
up to 30 stations in the IS memory. The
stored stations then can be called one
after the other.
The IS memory is useful if you wish to re-
assign the station buttons, or when you
are in an unknown reception area and do
not wish to delete already stored stations.
Starting the IS search
• Press on
or
repeatedly for more than 2 seconds until
4
"IS ON" appears in the display.
• Press the AS button
seconds. "STORE" appears in the dis-
play.
This operation takes several seconds.
15
• If no reception is possible, for example in
an underground car park or if the aerial
is defective, the search function may be
endless. In this case you may switch off
the search function by pressing one of
the station buttons
As soon as the IS search is completed, up
to 30 stations are stored. You then will
hear the station giving best reception.
The intelligent search function first stores
the RDS stations (sorted by station name)
and then the remaining stations in the
order of their volume level.
Calling up the IS memory contents
ßE
of the rocker
Selecting the IS mode
• Press on
4
for about 2
• Briefly press on
Switching the IS mode off
• Press on
1
6
...
.
RADIO MODE
or
of the rocker
repeatedly for more than 2 seconds until
"IS ON" appears in the display.
or
ßE
.
or
of the rocker
repeatedly for more than 2 seconds until
"IS OFF" appears in the display.
ßE
of the rocker
ßE
7
Hide quick links:
Advertisement
Table of Contents
