thomann Harley Benton ISO-Li09 PowerBank Quick Start Manual

ISO-Li09 PowerBank
Safety instructions
Intended use
This device generates extra-low voltage from the mains voltage, for example for pow-
ering effects pedals. Any other use or use under other operating conditions is consid-
ered to be improper and may result in personal injury or property damage. No liability
will be assumed for damage resulting from improper use.
This device may be used only by persons with sufficient physical, sensory, and intel-
lectual abilities and the necessary knowledge and experience. Other persons may use
this device only if they are supervised or instructed by a person who is responsible
for their safety.
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can
injure themselves when handling the device. Never allow children to play
with the packaging material and the device. Always store packaging mate-
rial out of the reach of babies and small children. Always dispose of pack-
aging material properly when it is not in use. Never allow children to use
the device without supervision. Keep small parts away from children and
make sure that the device does not shed any small parts (such as knobs)
that children could play with.
Damage to connected effects pedals due to overvoltage or incorrect
polarity!
If unsuitable effects pedals are connected to the device, or if the output
voltage and polarity on the power output of the device do not match the
voltage specifications of the effects pedal, connected effects pedals can be
damaged by overvoltage or incorrect polarity. If things go badly, overvolt-
age or incorrect polarity can also cause a risk of injury and fire. Only use the
designated connection cables with the device. Make sure that the output
voltage on the power output of the device is suitable for the effects pedal
to be operated and has the correct settings where applicable, and that the
polarity is correct. If in doubt, compare the voltage specifications on the
effects pedal and the polarity (+/-) with the specifications in this manual
and printed on the device. Voltage and polarity must always match.
Damage to the device due to use of unsuitable external power supplies!
If the device is operated with an unsuitable external power supply, the de-
vice can be damaged by overvoltage or incorrect polarity. If things go bad-
ly, using an unsuitable power supply can also cause a risk of injury and fire.
Only use the external power supply designated for the device or an equiv-
alent external power supply with identical parameters. If in doubt, com-
pare the voltage specifications on the external power supply and the po-
larity (+/-) with the specifications in this manual and printed on the device.
Voltage and polarity must always match.
Features
• Power bank with 9 direct voltage outputs for powering effects with a high power
consumption and multi-effects devices
- 7 × isolated output: 5 × 9 V at 0.3 A each, 2 × 9 V at 0.5 A each
- 1 × non-isolated output: 9 V 2 A/12 V
be selected)
- 1 × isolated output: 9 V 0.5 A/12 V
be selected)
• 1 × output: USB-C 18 W for power supply and for charging tablets and phones
• High current rating for modern digital effects
• LED monitoring on every output
• Compact design for easy installation below the pedal board
• Dimensions (W × H × D): 195 mm × 35 mm × 88 mm
1.5 A/18 V 1 A (voltage can
0.375 A/18 V 0.25 A (voltage can
Quick start guide
This document contains important information on the safe use of the product.
Read and follow the safety instructions and all other instructions. Keep the docu-
ment for future reference. If you pass the product on to others, please include this
document.
Contents are subject to change. Please refer to the latest version of the documenta-
tion, which is available for download at www.thomann.de.
Damage to the external power supply due to high voltages!
The device is powered by an external power supply. The external power
supply can be damaged if it is operated with the incorrect voltage or if
high voltage peaks occur. In the worst case, excess voltages can also cause
a risk of injury and fires. Make sure that the voltage specification on the
external power supply matches the local power grid before plugging in
the power supply. Only operate the external power supply from profes-
sionally installed mains sockets that are protected by a residual current
circuit breaker (FI). Ensure that the power cord plug is easily accessible at
all times if it is the only device to safely disconnect the device from the
mains supply. As a precaution, disconnect the power supply from the pow-
er grid when storms are approaching or if the device will not be used for a
longer period.
Possible damage to lithium-ion batteries through incorrect storage!
Deep discharge can permanently damage lithium-ion batteries or cause
them to lose some of their capacity. Charge the lithium-ion batteries be-
fore longer breaks in use and before storage. Ensure that the device is
switched off for storage. Store the device at room temperature or cooler in
an environment as dry as possible. Recharge the lithium-ion batteries
about every three months if they are stored for a longer period of time to
avoid permanent damage due to too deep self-discharge. Fully charge the
lithium-ion batteries at room temperature immediately before use.
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable ambient condi-
tions. Only operate the device indoors within the ambient conditions
specified in the "Technical specifications". Avoid operating it in environ-
ments with direct sunlight, heavy dirt and strong vibrations. Avoid operat-
ing it in environments with strong temperature fluctuations. If tempera-
ture fluctuations cannot be avoided (for example after transport in low
outside temperatures), do not switch on the device immediately. Never
subject the device to liquids or moisture. Never move the device to anoth-
er location while it is in operation. In environments with increased dirt
levels (for example due to dust, smoke, nicotine or mist): Have the device
cleaned by qualified specialists at regular intervals to prevent damage due
to overheating and other malfunctions.
General handling
• To prevent damage, never exert force while operating the device.
• Never immerse the device in water. Wipe only with a clean and dry cloth. Do not
use liquid cleaners such as benzene, thinners or flammable cleaning agents
Keep foreign substances away from the device!
Keep the device away containers with liquid. Should liquid enter the device, this
could lead to its destruction or fire. Ensure that no metallic parts enter the device.
• Weight: 750 g
• Included: 1 × power adapter with 12 V
6 × DC cable, 60 cm long with 5.5 mm × 2.1 mm coaxial plug to
5.5 mm × 2.1 mm coaxial plug
3 × direct current cable, 30 cm long with 5.5 mm × 2.1 mm coaxial
plug to 5.5 mm × 2.1 mm coaxial plug
1 × direct current cable, 45 cm long with 5.5 mm × 2.1 mm coaxial plug
to 5.5 mm × 2.5 mm coaxial plug
at 2 A
EN