Page 1
MMX-MNSXP(R) ENCLOSURE MMX-MNSXP(R) MULTI PURPOSE BACKBOX THIS DOCUMENT LT-6052SEC ONLY DESCRIBES MECHANICAL STRUCTURE OF THE BACKBOX AND PROVIDES ONLY A GENERALIZED DESCRIPTION OF ASSEMBLY. FOR MORE DETAILED INFORMATION REFER TO DOCUMENT LT-894SEC FOR THE MMX PANEL AND LT-899 FOR THE INX-10AC NAC EXPANDER.
Page 2
MMX-MNSXP(R) ENCLOSURE MMX-MNSXP(R) Mechanical Installation Material 16GA Steel (0.059” thick) for backbox 14GA Steel (0.075” thick) for door Finish Painted except for hinges Dimensions Enclosure dimensions (door and backbox): 27 1/2” wide by 62 3/4” long by 9” deep There are 6 mounting holes, the top 2 are 21 1/2” apart and the bottom 2 mounting holes are aligned slightly left and 58 1/2”...
Cross section views of mounted MMX-MNSXP(R) enclosure 1.3” 9” DOOR WALL WALL SURFACE MOUNT FLUSH MOUNT Figure 2 Surface and Flush Mounting Views of the MMX-MNSXP(R) TOP VIEW Wall Wall WOOD OR METAL STUD Figure 3 Cross-Section of the MMX-MNSXP(R) Flush Mounted Box LT-6052SEC...
Figure 4 below. 4. Mount chassis using the supplied hexnuts. Mounting the Audio System into the MMX-MNSXP(R) Enclosure Figure 4 Audio System Installation in the MMX-MNSXP(R) with CH-993 Internal Chassis Note: Leave the bottom of the box conduit free for batteries.
Page 5
MMX-MNSXP(R) ENCLOSURE Mounting Intelligent NAC Expanders into the MMX-MNSXP(R) Enclosure Figure 5 NAC Expander Installation in the MMX-MNSXP(R) with CH-994 Internal Chassis LT-6052SEC Page 5 of 6 Rev 0 Jan 2014...
MMX-MNSXP(R) ENCLOSURE Wire Routing Note: All external connections are power limited except for the AC connections to the transformer. The transformer connections must be routed separately from all other external connections using their own conduit. Figure 6 Wire Routing LT-6052SEC...
Need help?
Do you have a question about the MMX-MNSXP and is the answer not in the manual?
Questions and answers