Secutron MMX-BB-1001WPA Quick Installation Manual

MMX-BB-1001WP(R)A and MMX-BB-
1002WP(R)A Weather Protected Enclosures
Rated for Outdoor Environment Wet Location according to UL 864
122 °F (+50 °C) to −40 °F (−40 °C)

MMX-BB-1001WP(R)A Annunciator Installation

GB-1001RAM guard bracket
for RAM-1032TZDS-CC
4 nuts

MMX-BB-1001WP(R)A External Dimensions

3 1/2"
11 1/8"
Threaded conduit
connector (field installed)
Suggested location
Notes: MMX-BB-1001WPA is a white model. MMX-BB-1001WPRA is a red model.
Connect chassis ground stud to earth ground.
To prevent water from entering the box:
• Use a threaded conduit connector to provide entry for cables.
• Apply outdoor-rated weatherproof silicone to the 4 mounting holes and around the
threaded conduit connector.
Refer to RAM-1032TZDS in LT-617 RA-1000 Series Manual for wiring instructions, DIP switch
settings, and operation.
LT-6161SEC Rev 0 May 2022
Annunciator
(RAM-1032TZDS-CC shown)
Door
13/16"
9 1/2"
Knockout diameter 7/8" (0.875")
Use 1 of the 2 knockouts for wiring
31/32"
2 1/4"
Backbox
12 15/16"
11"
Mounting hole diameter
Apply outdoor-rated
7/32" (0.215")
weatherproof silicone to
Use #10 screws (outer
diameter 0.187")
the 4 mounting holes
and around the threaded
conduit connector.
13/16"
10 11/16"
1 1/16"
Page 1 of 2