Related Manuals for Optimum Smart Klaus
Summary of Contents for Optimum Smart Klaus
- Page 1 Smart Klaus Installation and commissioning manual Exemplary illustration of the basic system For instructions, please visit www. optimum-gmbh.de/en/downloads Status: 29.2024 Errors and changes excepted.
-
Page 2: Table Of Contents
Smart Klaus Contents Camera installation PanTilt Camera installation Projector installation Ports Troubleshooting Instruction Manual... -
Page 3: Camera Installation
Smart Klaus Camera installation... - Page 4 Smart Klaus Camera installation Locknut Washer Hexagon Screw Hexagon Screw Dept. Technical reference Created by Optimum Dept. Technical reference Created by Optimum GmbH 19.04.2024 Document typ al reference Created by Approved by Dept. Technical reference Created by Approved by Optimum GmbH 19.04.2024...
- Page 5 Smart Klaus Camera installation Do not remove the protective cap of the lens yet!
- Page 6 Smart Klaus Camera installation Remove upper cuff Remove lower cuff Set aside...
- Page 7 Smart Klaus Camera installation Insert from above Insert from below...
- Page 8 Smart Klaus Camera installation The panel must be mounted firmly and free from vibrations...
- Page 9 Smart Klaus Camera installation Back view...
-
Page 10: Pantilt Camera Installation
Smart Klaus PanTilt Camera installation... - Page 11 Smart Klaus PanTilt Camera installation Hammer nut PanTilt Camera Dept. Technical reference Created by Approved by Optimum GmbH 19.04.2024 Document type Document status Title DWG No. Einzelteile Kamerazusammenbau Rev. Date of issue Sheet Cuff nut with glass Dept. Technical reference...
- Page 12 Smart Klaus PanTilt Camera installation...
- Page 13 Smart Klaus PanTilt Camera installation „Click“...
- Page 14 Smart Klaus PanTilt Camera installation Screw both sides (L + R) Bottom view...
- Page 15 Smart Klaus PanTilt Camera installation...
-
Page 16: Projector Installation
Smart Klaus Projector installation... - Page 17 Smart Klaus Projector installation Washer Washer Hammer nut...
- Page 18 Smart Klaus Projector installation...
- Page 19 Smart Klaus Projector installation...
- Page 20 Smart Klaus Projector installation...
-
Page 21: Ports
Smart Klaus Ports Lamp power Monitor power PanTilt Network supply plug supply plug HDMI LAN 1 LAN 2 Safety fuse activated USB 3.2 Monitor port Keyboard and Camera port Audio Power plug mouse port Power button USB port (for service and... -
Page 22: Troubleshooting
Klaus. • Check the residual-current circuit breaker under the rubber cap on the front of Smart Klaus. When set correctly, the switch points to the right. (see p.6) • Disconnect the power cable and check the safety fuse on the power switch. -
Page 23: Instruction Manual
If the following information and warnings, including the supplementary operating instructions, are not observed, liability for loss or damage of any kind on the part of Optimum shall be excluded – to the extent permitted by law. This shall also apply, in particular, to material damage and personal injury. - Page 24 Safety instructions All persons tasked with system operation are required not only to read, but also to understand this work instruction. The safety instructions are prescribed by law. They serve to ensure occupational health and safety and accident prevention. The work instruction, in conjunction with the operating instructions, makes safe operation possible and helps in the elimination of possible malfunctions.
- Page 25 Safety devices must not be rendered ineff ective or deactivated. Optimum shall not be liable in the event of independent, unauthorized modifications In their own interest, operating companies are requested to perform a visual inspection of the device once a day. Any possible damage must be eliminated in the correct manner prior to operation.
-
Page 26: Emergency Call
Measures: • Call the emergency number (in Germany 112) EMERGENCY CALL: To provide targeted help, emergency services require the following information: • WHERE did the accident happen • WHAT happened • HOW MANY injured persons • WHICH type of injuries, state electrical accident! •... - Page 27 Transport, assembly, maintenance and troubleshooting CAUTION! All mechanical work, such as installation, maintenance and repair, must only be carried out with the equipment de-energised and by a suitably qualifi ed technician or under his/her supervision. Transport To transport the system, no special features have to be observed except for the standard specifi cations on load securing and suitable packaging to prevent transport damage.
- Page 28 For instructions, please visit www. optimum-gmbh.de/en/downloads Status: 29.2024 Errors and changes excepted. Optimum datamanagement solutions GmbH Neureuter Straße 37a 76185 Karlsruhe Tel.: +49 721 570 44 95-0 Fax: +49 721 570 44 95-5 E-Mail: sales@optimum-gmbh.de www.optimum-gmbh.de...
Need help?
Do you have a question about the Smart Klaus and is the answer not in the manual?
Questions and answers