Connecting / Installing The Freecom Musicpal; Hardware (Lan); Chapter - Freecom MUSICPAL User Manual

Chapter 1: Connecting / Installing the Freecom MusicPal

1.1 Hardware (LAN)

Installation of the Freecom MusicPal proceeds according to the following steps:

Connecting / Installing the Freecom MusicPal

1. Connect the power pack to your Freecom MusicPal and
plug into a power socket.
2. Take the enclosed Ethernet cable and use it to connect the
LAN port on the back of the Freecom MusicPal with the
LAN port of your media server (UPnP) or router/switch.
3. Set your router to DHCP in the IP configuration. For more
details, refer to the Appendix in this manual.
4. Check the LINK/ACT light of the Freecom MusicPal LAN
port. If it is illuminated, the Freecom MusicPal is correctly
connected.
5. Select Internet Radio from the main menu of your Freecom
MusicPal.
EN
1
9