Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for turck UHF-SYS-GATE Series
Summary of Contents for turck UHF-SYS-GATE Series
- Page 1 UHF-SYS-GATE… RFID System Solution Instructions for Use...
-
Page 2: Table Of Contents
Function blocks: Modules ................... 20 8.6.1 Example: Creating modules....................... 21 8.6.2 Creating a JSON file ........................ 25 Digital I/O channels ...................... 25 V01.01 | 2025/01 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 3 12.1 Returning devices ...................... 30 13 Disposal.............................. 31 14 Technical data........................... 32 15 Turck branches — contact data .................... 33 V01.01 | 2025/01 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 4: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V01.01 | 2025/01 | 4 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 5: Notes On The Product
In addition, 4 × M10 × 20 screws are required to mount the gate on supports. The screws are not included in the scope of delivery. Turck service Turck supports you in your projects – from the initial analysis right through to the commission- ing of your application. The Turck product database at www.turck.com... -
Page 6: For Your Safety
The product is designed according to state of the art technology. Residual hazards, however, still exist. Observe the following safety instructions and warnings in order to prevent danger to persons and property. Turck accepts no liability for damage caused by failure to observe these safety instructions. -
Page 7: Product Description
ANT-Q150-…. UHF antennas. The gate can be mounted directly at the intended location, e.g. at an entry point. The Turck Vilant Node software is preinstalled on the UHF reader. Extension cables are included for connecting the reader to the control level and to the power supply, as well as for connecting the external antennas. -
Page 8: Operating Principle
RFID system. The OPC UA server integrated into the reader communicates with the OPC UA client of the higher-level sys- tem to do this. V01.01 | 2025/01 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 9: Functions And Operating Modes
4.4.2 Recommended tags Turck recommends using UHF tags with a max. antenna length of 10 cm. Larger tags can cause erroneous readings outside the tunnel. If metallic objects are to be identified, tags that are suitable for mounting on metal must be used (on-metal tags). -
Page 10: Installing
45 min. „ Have two people install the RFID gate. Fig. 3: Assembly diagram for the RFID gate V01.01 | 2025/01 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 11: Connection
With PoE, the supply voltage is transmitted via PoE Mode A with 4-wire cables. The use of PoE and 24 VDC simultaneously is not supported. V01.01 | 2025/01 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 12: Connecting The Power Supply
Fig. 8: RP-TNC sockets for connecting external antennas „ Connect external antennas with an RP-TNC antenna cable to the device (max. tightening torque 0.8 Nm). V01.01 | 2025/01 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 13: Commissioning
NOTICE Insufficiently secured devices Unauthorized access to sensitive data „ Change the password after the first login. Turck recommends the use of a secure password. „ Enter the IP address of the browser and port number 8080 in the address bar of a browser. - Page 14 Turck Vilant Node: Starting the software „ Open the Configuration area. Fig. 10: Opening the Configuration area in Turck Vilant Node V01.01 | 2025/01 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 15: Setting The Transmission Zone
Low number of tags: 250 ms Medium number of tags: 500 ms Large number of tags: 500…1000 ms Default settings: 65535 ms V01.01 | 2025/01 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 16: Typical Read Times
Antenna polarization Circular Linear Linear Detection range align- Left/right Vertical Horizontal ment Antenna — Tag alignment Not required Vertical Horizontal V01.01 | 2025/01 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 17: Parameterizing And Configuring
/rfid/stop REST interfaces. JSON data format The read data is displayed in JSON format in Turck Vilant Node. Data in JSON format is also used for the internal reader functions and kept in STORE. Empty fields and default fields are omitted in JSON. -
Page 18: Antenna Status
Combinations (e.g. 1,2): Activate multiple external antennas (e.g. antenna 1 and antenna 2) Interfaces: HTTP and REST Turck Vilant Node includes an HTTP server. The reader can be accessed via ports 8080 and 8081 (SSL). The port addresses that are used for access can be configured via HTTPD_PORT and HTTPSD_PORT. -
Page 19: Mqtt
Controls the GPIO ports /tvs/<id>/cmd/gpio A comprehensive explanation of the commands can be found in Turck Vilant Node under Readme. V01.01 | 2025/01 | 19 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 20: Function Blocks: Modules
Enables filter functions depending on the number of read opera- (Pro license required) tions TAGDATA Supplements the read data with an additional Info field Fig. 12: Turck Vilant Node: Readme V01.01 | 2025/01 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 21: Example: Creating Modules
In the following example, the RFID_READER and STORE modules are created in Turck Vilant Node. „ Open the module configuration feature in Turck Vilant Node: Click on Modules. Fig. 13: Opening the Modules area V01.01 | 2025/01 | 21 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 22 Add modules: Click on New Module and drag and drop the desired module into the con- figuration area (in this case: RFID_READER). Fig. 14: Adding the RFID_READER module V01.01 | 2025/01 | 22 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 23 Add additional modules. The RFID_READER and STORE modules must always be present. „ Connect the inputs and outputs of the modules using drag-and-drop. Fig. 15: Adding additional modules (in this case: STORE) V01.01 | 2025/01 | 23 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 24 Parameterizing and configuring Function blocks: Modules „ Save the module configuration. Fig. 16: Saving the module configuration V01.01 | 2025/01 | 24 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 25: Creating A Json File
"type":"DATA","fail":false} ] Digital I/O channels Turck Vilant Node supports control of external I/O devices using GPIOs. In Turck Vilant Node, under Readme, you will find further information on controlling external I/O modules as well as simple programming examples. V01.01 | 2025/01 | 25... -
Page 26: Operation
UHF reader: LEDs The meaning of the LED displays on the reader can be found in the device-specific Instructions for Use. V01.01 | 2025/01 | 26 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 27: Troubleshooting
If the malfunction persists, the device is faulty. In this case, decommission the device and replace it with a new device of the same type. V01.01 | 2025/01 | 27 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 28: Maintenance
TAS. „ Click Firmware in the web server. Fig. 17: Opening the firmware update function in the web server V01.01 | 2025/01 | 28 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 29 Select the update file. Fig. 18: Update file „ Start installing the update using the UPDATE FIRMWARE button. Fig. 19: Starting the update V01.01 | 2025/01 | 29 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 30: Updating The Reader
This is available for download at https://www.turck.de/en/return-service-6079.php and must be completely filled in, and affixed securely and weather-proof to the outside of the packaging. V01.01 | 2025/01 | 30 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 31: Disposal
Disposal Disposal The devices must be disposed of properly and do not belong in the domestic waste. V01.01 | 2025/01 | 31 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 32: Technical Data
Anodized AL, painted black Protection class IP67 System description Network protocol TCP/IP REST API Programming interface Ethernet System data Web server Default: 192.168.1.254:8080 V01.01 | 2025/01 | 32 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 33: Turck Branches - Contact Data
Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it Japan TURCK Japan Corporation ISM Akihabara 1F, 1-24-2, Taito, Taito-ku, 110-0016 Tokyo www.turck.jp V01.01 | 2025/01 | 33 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 34 United Kingdom TURCK BANNER LIMITED Blenheim House, Hurricane Way, GB-SS11 8YT Wickford, Essex www.turckbanner.co.uk Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V01.01 | 2025/01 | 34 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 35 Over 30 subsidiaries and 60 representations worldwide! 100051107 | 2025/01 100051107 www.turck.com...
Need help?
Do you have a question about the UHF-SYS-GATE Series and is the answer not in the manual?
Questions and answers