Freecom DVBT-STICK USB Manual page 28

Freecom DVB-T USB Stick
4.4 More Functions
GB
Mute display Mute display
Mute display Mute display : When you click "Mute" button, Mute display
panel.
4
Signal display Signal display Signal display : In the setting menu " General" , choose (refresh RF information).
Signal display Signal display
Move the cursor to
it's very power consuming. We do not suggest using it if the battery is not
enough in the system.
Warning ! This selection will affect some quality and function.
Don't use it under normal circumstance. We suggest that you turn
off this function after executing the "Refresh RF information"
Recording display Recording display
Recording display Recording display: When you start real-time or scheduling recording, the Recording display
the control panel will turn red.
Program channel display Program channel display Program channel display : Program channel display Program channel display
on the control panel will indicates the channel of on-going playing or
recording program.
Source of display Source of display : When digital broadcasting program is playing , the control Source of display
Source of display Source of display
panel will indicate its source as following
recorded or selected image, the control panel will indicate the file name or status
as following
Volume display Volume display
Volume display Volume display : When you adjust the volume, the volume icon Volume display
accordingly .
Electronic Program Menu Electronic Program Menu Electronic Program Menu : You may enter the program menu by choosing Electronic Program Menu Electronic Program Menu
on the control panel. You will receive the information of channel programs
such as programs schedule and introductions of the programs. (This function is
provided by the channel provider). You may double click on a "channel
schedule" and scheduling recording setup window will pop out.
28
, then you can see the signal receiving in motion. But
.
will light up on the control
. If it's playing the
will change
on