Freecom DVBT-STICK USB Manual page 18

Freecom DVB-T USB Stick
Scan Frequency: Scan Frequency:
Scan Frequency: Scan Frequency: Scan Frequency:
GB
1. Click
3
2.Choose RF Frequency. You may select one of the following.
3. Click "Start
select.
4. You may save all scanned channels by Click "Save as
5. Click "OK
Note: Channel list will be saved as TBL file.
18
the operating panel then choose Scan Channel
1. 1. 1. 1. 1. Country/ Area: Country/ Area: Country/ Area: Country/ Area: You may choose the location where Country/ Area:
you are.
2. 2. 2. 2. 2. All All All: If you can not find your location list in Country/ All
All
Area list, you may select this option.
3. 3. 3. 3. 3. Range Range Range
Range: You may define your own frequency range. Range
Choose VHF or UHF then enter its frequency range.
4. Single 4. Single 4. Single 4. Single 4. Single: If you know exact frequency of a digital pro-
gram, you may enter its frequency here.
Start Start" to scan frequency based on the option of RF Frequency you Start
Start
OK OK
OK OK" to exit the operating panel.
Scan Channel tab. Scan Channel Scan Channel
Scan Channel
Save as". Save as Save as Save as