Related Manuals for Centrica PAN-10
Summary of Contents for Centrica PAN-10
- Page 1 Operation and maintenance manual PAN-10 and PAN-12 Sensor installation guide Version 1.9 April 2025...
- Page 2 PAN-10 and PAN-12 Sensor installation guide Copyright notice Copyright © 2012-2017 Panoramic Power Ltd. All rights reserved. Panoramic Power® is a registered trademark of Panoramic Power Ltd. All other trademarks are the property of their respective owners. FCC compliance statement This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 3 PAN-10 and PAN-12 Sensor installation guide IC compliance statement This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference that may be received or that may cause undesired operation.
- Page 4 PAN-10 and PAN-12 Sensor installation guide Safety Precautions – Panoramic Power Sensor Installation The installation of this product (the ‘sensor’) must be undertaken by an electrically qualified and competent person to prevent danger, injuries or a fatality due to the significant risks associated with work on or near live electrical conductors.
-
Page 5: Table Of Contents
PAN-10 and PAN-12 Sensor installation guide Contents Overview Workflow Safety precautions Hardware description Mapping the site Installing a sensor Attaching the sensors to the circuits Registering the installed sensor Monitoring sensor activity Uninstalling a sensor Sensor specifications Troubleshooting Support www.centricabusinesssolutions.com/panoramicpower... -
Page 6: Overview
PAN-10 and PAN-12 Sensor installation guide Overview The Panoramic Power System monitors electrical energy consumption at individual circuit level and detects excess usage allowing organizations to identify and reduce energy and maintenance expenses. The Panoramic Power System consists of wireless, self-powered sensors engineered to allow for rapid, non-invasive installation, with almost no disturbance to operations. -
Page 7: Hardware Description
PAN-10 and PAN-12 Sensor installation guide Installation is possible both on external entry/exit conductors before • the terminal strip, as well as both ends of the circuit breaker. The least cramped, most accessible location should be chosen for installation. Hardware description This procedure must be carried out only by a certified electrician. -
Page 8: Installing A Sensor
PAN-10 and PAN-12 Sensor installation guide Installing a sensor This process is divided into two stages: 1. Physically attaching the sensors to the circuit wires. 2. Registering the installation in the Panoramic Power software platform. Attaching the sensors to the circuits To install a sensor, follow these steps: 1. - Page 9 PAN-10 and PAN-12 Sensor installation guide 5. Press the two sides of the opener to release the sensor cover. Figure 5. Press the opener to release the cover. For PAN-12 Sensors 6. Lift the clip up to open the sensor using your hands or a screwdriver 7.
-
Page 10: Registering The Installed Sensor
PAN-10 and PAN-12 Sensor installation guide Registering the installed sensor Visit our Knowledge Base Center to read our articles about mapping the sensors to the devices configured to the site. Monitoring sensor activity Visit our Knowledge Base Center to learn more about the sensor summary window that helps monitor sensor activity. -
Page 11: Sensor Specifications
PAN-10 and PAN-12 Sensor installation guide Sensor specifications Specifications PAN-10 PAN-12 Physical dimensions 17 x 20 x 32 mm 46.2 x 22.8 x 32.6 mm 0.67 x 0.79 x 1.26 inch 1.82 x 0.90 x 1.28 inch Max hot-air outer diameter 7 mm 18.8 mm... -
Page 12: Troubleshooting
PAN-10 and PAN-12 Sensor installation guide Troubleshooting If you encounter a problem, first try the following solution: Problem Solution The sensor is not sending measurements Make sure the circuit has current. Make sure that the sensor arrow points in the direction of the load.
Need help?
Do you have a question about the PAN-10 and is the answer not in the manual?
Questions and answers