Installing F-Secure Psb Server Security; System Requirements - F-SECURE PSB Getting Started Manual

3. In the Download software page, click the
you have not downloaded the workstation software yet, click also the
workstation software
4. Extract the Remote Installation Tool zip file on a local drive.
5. Double-click the ritool.bat file.
The F-Secure Remote Installation Tool window opens.
6.
In the Software to Install page, click
The Software Installer Selection window opens.
7. Locate the downloaded workstation software file and click OK.
8. Click Next.
9. In the Target Computers page, do the following:
a) Under Domain
b) Under Computer
software.
10. Click Next.
11. In the Account page, do the following:
a) Select Another
b) Enter the domain administrator name and password.
c) Confirm the password.
12. Click Next.
13. Click Install.
The workstation software is being installed on the selected computers.
In the F-Secure PSB portal, verify that the computer shows in the portal.

Installing F-Secure PSB Server Security

This section describes the system requirements for installing and using the product, and gives
you step-by-step instructions on how to install the product.

System requirements

Read the following before starting to install and use the F-Secure PSB Server Security software.
Your computer must meet the following requirements for installing and using the product:
Download the Remote Installation Tool
link.
.
Name, select the domain to which the computers belong.
Name, select the computers on which you want to remote install the
account.
F-Secure PSB Getting Started Guide | 15
link. If
Download the