Advertisement
Advertisement
Table of Contents
Related Manuals for Trailer Vision Digi-View 2
Summary of Contents for Trailer Vision Digi-View 2
- Page 1 Digi-View2™ User Manual Digital Wireless Camera System...
-
Page 2: Table Of Contents
INDEX 1. Introduction ----- - -- - - - - 2. Installation 3. Camera and monitor placement----- 4. Fe at ur es - - - - - - - - - - - - - - 5. Operating instructions -------- 6. -
Page 3: Introduction
Introduction Please read all of the instructions carefully before installing the product, as improper installation will void the manufacturer's warranty. Thank you for purchasing Digi-View2™. With this manual you will be able to properly install and operate the system. The system is intended to be installed as a supplementary reversing aid and/or to view your horses/load. -
Page 4: Installation
Installation The Monitor and Camera(s) are already paired. The Camera can be fixed to the rear or inside the horsebox/trailer etc & usually behind the horse is better/safer. The Camera can be powered via the internal light/light-switch and if used as a reversing camera it can be powered via the reversing light. -
Page 5: Features
Features Product Item Technical Parameters Sensor type 1 /2.9" CMOS SENSOR Effective Pixels 1920*1080 Pixel size 2.8um*2.8um Level angle ° TX Camera Vertical angle ° Opposite angles ° auto Radio frequency 2.4G LCD Dimension 4 3"TFT LCD RX Monitor Resolution RGB 800*480 Adjustable Mirror/non mirror... -
Page 8: Operating Instructions
Operating instructions 3.1 After entering the MIR-FLIP interface, adjust the desired screen flipping form by pressing .A. and T the button, and select the desired camera screen direction (the selected icon will turn red and brown). 3.2 No need to press the button, the camera screen direction <3 has been set to the currently selected direction. -
Page 10: Safety Info
Safety info Place the monitor away from direct sunlight, heat, water or moisture. This product is made with precise electronic components. Handle with care. Improper use can cause a malfunction. ♦ Firmly insert the lighter plug into cigarette socket. ♦ Do not install the monitor where it may obstruct drivers view or obstruct an air bag device.
Need help?
Do you have a question about the Digi-View 2 and is the answer not in the manual?
Questions and answers