Front......................................9 Bottom....................................10 Locate the Service Tag or Express Service Code label of your computer..............11 Battery-charge status light..............................11 Kapitola 2: Set up your Dell Pro 16 PC16255..................13 Kapitola 3: Specifikace počítače Dell Pro 16 PC16255................15 Rozměry a hmotnost................................15 Processor....................................15 Čipová sada...................................16 Operační...
Page 4
Po manipulaci uvnitř počítače............................34 BitLocker....................................34 Doporučené nástroje................................34 Seznam šroubů..................................35 Hlavní komponenty počítače Dell Pro 16 PC16255......................36 Kapitola 5: Demontáž a instalace jednotek vyměnitelných zákazníkem (CRU)........39 Spodní kryt................................... 39 Removing the base cover.............................39 Installing the base cover............................... 42 Baterie....................................44...
Page 5
Kabel FPC desky I/O................................66 Removing the I/O-board FPC cable .......................... 66 Installing the I/O board FPC cable..........................67 Vypínač se čtečkou otisků prstů............................68 Removing the power button with fingerprint reader....................68 Installing the power button with a fingerprint reader....................69 Základní...
Page 6
Vymazání systémového hesla a hesla konfigurace......................136 Kapitola 9: Odstraňování problémů....................137 Manipulace s vyboulenými dobíjecími lithium-iontovými bateriemi................137 Kontrola výkonu nástroje Dell SupportAssist před spuštěním operačního systému..........137 Spuštění kontroly výkonu nástroje SupportAssist před spuštěním operačního systému........138 Automatický integrovaný test (BIST)..........................138 (Vestavěný samočinný test základní desky) M-BIST....................138 Logický...
Pohledy na počítač Dell Pro 16 PC16255 Right Obrázek 1. Right View 1. USB 3.2 Gen 1 port Connect devices such as external storage devices and printers. It provides data transfer speeds up to 5 Gbps. 2. USB 3.2 Gen 1 port with PowerShare Connect devices such as external storage devices and printers.
A 40 Gbps-certified cable is required to achieve the maximum performance of 40 Gbps. POZNÁMKA: The USB port is backward compatible with USB 3.2, USB 2.0. 5. Global headset port Connect headphones or a headset (headphone and microphone combo). Obrázek 3. Top view Pohledy na počítač Dell Pro 16 PC16255...
Provides digital sound input for audio recording and voice calls. 2. Infrared camera (optional) Enhances security when paired with Windows Hello face authentication. 3. Infrared emitter (optional) Emits infrared light, which enables the infrared camera to sense and track motion. 4. Privacy shutter Pohledy na počítač Dell Pro 16 PC16255...
The Express Service Code is a numeric version of the Service Tag. 3. MyDell QR code MyDell is your hub for content that is personalized to your Dell Pro 16 PC16255, including videos, articles, manuals, and easy access to support.
Locate the Service Tag or Express Service Code label of your computer The service tag is a unique alphanumeric identifier that allows Dell service technicians to identify the hardware components in your computer and access warranty information. The Express Service Code is a numeric version of the Service Tag.
Page 12
Tabulka 2. Ethernet (RJ45) status LED (pokračování) LED Behavior Connection status Blinking Amber Data transfer is in progress. Pohledy na počítač Dell Pro 16 PC16255...
If connecting to a secured wireless network, enter the password for the wireless network access when prompted. ● If connected to the Internet, sign in with or create a Microsoft account. 3. Locate and use Dell apps from the Windows Start menu—Recommended. Set up your Dell Pro 16 PC16255...
Page 14
When an issue is detected, the necessary system state information is sent to Dell to begin troubleshooting. SupportAssist is preinstalled on most of the Dell devices running the Windows operating system. For more information, see Support Assist documentation at...
POZNÁMKA: Hmotnost počítače závisí na objednané konfiguraci. Processor The following table lists the details of the processors that are supported in your Dell Pro 16 PC16255. Tabulka 5. Processor (For computers shipped with AMD Ryzen AI 300 series) Description Option one...
Not applicable Not applicable Not applicable Not applicable Up to 16 TOPS Performance Čipová sada Následující tabulka obsahuje podrobné údaje o čipové sadě podporované počítačem Dell Pro 16 PC16255. Tabulka 7. Čipová sada Popis Hodnoty Čipová sada Integrováno v procesoru Procesor ● AMD Ryzen AI 7 PRO 350 ●...
● Windows 10 Professional POZNÁMKA: Pokud provedete downgrade počítače ze systému Windows 11 na systém Windows 10 22H2, podpora společnosti Dell Technologies se bude řídit plánem ukončení podpory systému Microsoft Windows 10. Paměť Následující tabulka obsahuje specifikace paměti podporované počítačem Dell Pro 16 PC16255. Tabulka 8. Specifikace paměti ...
Hodnoty Model Integrovaný, Realtek RTL8111H-CG Přenosová rychlost 10/100/1 000 Mb/s Bezdrátový modul Následující tabulka uvádí moduly WLAN (Wireless Local Area Network, místní oblastní síť) podporované v notebooku Dell Pro 16 PC16255. Tabulka 12. Specifikace bezdrátového modulu Popis Hodnoty Modelové číslo MediaTek MT7922 Přenosová rychlost 2400 Mb/s...
● Wi-Fi 6E (Wi-Fi 802.11ax) Šifrování ● 64bitové/128bitové WEP ● AES-CCMP ● TKIP Bezdrátová karta Bluetooth Bluetooth 5.3 Zvuk V následující tabulce jsou uvedeny parametry zvuku v počítači Dell Pro 16 PC16255. Tabulka 13. Parametry zvuku Popis Hodnoty Řadič zvuku Realtek ALC3204 Převod stereofonního signálu Podporováno Interní...
Klávesnice V následující tabulce jsou uvedeny specifikace klávesnice v počítači Dell Pro 16 PC16255. Tabulka 15. Specifikace klávesnice Popis Hodnoty Typ klávesnice ● Podsvícená klávesnice s klávesou Copilot a čtečkou otisků prstů ● Podsvícená klávesnice s klávesou Copilot ● Nepodsvícená klávesnice s klávesou Copilot a čtečkou otisků...
Page 21
Copilot Launch Copilot in Windows POZNÁMKA: If Copilot in Windows is not available on your computer, the Copilot key launches Recall. If both Recall and Copilot in Windows are not available on your computer, the Specifikace počítače Dell Pro 16 PC16255...
Více informací o gestech touchpadu dostupných v systému Windows naleznete v článku znalostní databáze Microsoft na stránkách podpory společnosti Microsoft. Napájecí adaptér V následující tabulce jsou uvedeny parametry napájecího adaptéru počítače Dell Pro 16 PC16255. Tabulka 20. Specifikace napájecího adaptéru Popis Možnost jedna Možnost dvě...
3-cell, 45 Wh battery) POZNÁMKA: If you did not purchase the Dell-branded power adapter that is recommended for your computer, ensure that the power adapter you use meets the following requirements. The following table lists the power adapter requirements for your Dell Pro 16 PC16255.
ExpressCharge mode must also be enabled in the BIOS Setup screen. Select Power > Battery Configuration > ExpressCharge, then press Enter Baterie V následující tabulce jsou uvedeny parametry baterie počítače Dell Pro 16 PC16255. Tabulka 23. Specifikace baterie Popis Možnost jedna Možnost dvě...
VÝSTRAHA: Společnost Dell doporučuje baterii kvůli optimální spotřebě energie pravidelně nabíjet. Jestliže dojde k úplnému vybití baterie, připojte napájecí adaptér, zapněte počítač a poté jej restartujte, aby se snížila spotřeba energie.
72 Watts in order to achieve the maximum charging speed. This computer supports USB Power Delivery (PD) fast charging. Displej V následující tabulce jsou uvedeny specifikace displeje v počítači Dell Pro 16 PC16255. Tabulka 24. Specifikace obrazovky Popis Možnost jedna Možnost dvě...
V následující tabulce jsou uvedeny snímače v počítači Dell Pro 16 PC16255. Tabulka 26. Sensor Sensor support Hall Effect sensor GPU—Integrated The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your Dell Pro 16 PC16255. Tabulka 27. GPU—Integrated Controller Memory size Processor Grafika AMD Radeon 740M Sdílená...
● AMD Ryzen AI 7 350 ● AMD Ryzen AI 7 PRO 350 Multiple display support matrix The following table lists the multiple display support matrix for your Dell Pro 16 PC16255. Tabulka 28. Multiple display support matrix Graphics Card Direct Graphics Controller...
Dell. Dell Optimizer Dell Optimizer is an application that is designed to enhance computer performance and productivity by optimizing settings for power, battery, display, and presence detection. It also provides access to applications purchased with your new computer. For more information, see Dell Optimizer User's Guide at Dell Support Site.
VÝSTRAHA: Odstraňování problémů a opravy byste měli provádět pouze po získání oprávnění nebo výzvě týmu technické podpory Dell. Na škody způsobené neoprávněným servisním zásahem se nevztahuje záruka společnosti Dell. Více informací naleznete v bezpečnostních pokynech dodávaných s produktem nebo na stránkách souladu s předpisy společnosti...
POZNÁMKA: Ujistěte se, že je počítač vypnutý a napájecí adaptér je odpojen. a. Podržte stisknutou klávesu B a poté stiskněte tlačítko napájení na 3 sekundy nebo dokud se na obrazovce nezobrazí logo Dell. b. Pokračujte stisknutím libovolné klávesy. c. Pokud není odpojen napájecí adaptér, zobrazí se na obrazovce výzva k odpojení adaptéru. Odpojte napájecí adaptér a stisknutím libovolné...
elektřinou, jehož důsledkem je příznak „Žádný test POST / žádný obraz“ doprovázený zvukovým signálem, který značí chybějící nebo nefunkční paměť. ● Občasné – Občasné poruchy představují přibližně 80 % poruch způsobených statickou elektřinou. Ve většině případů tyto poruchy nejsou okamžitě rozeznatelné. Paměťový modul je zasažen statickou elektřinou, ale trasování je pouze oslabeno a navenek nevykazuje známky poškození.
Kromě toho je při provádění servisu počítače důležité uchovávat citlivé díly odděleně od všech izolátorů. Přeprava citlivých součástí Přepravované součásti (např. náhradní díly nebo díly vracené společnosti Dell), které jsou citlivé na statické elektřinu, je bezpodmínečně nutné chránit v antistatických obalech. Po manipulaci uvnitř počítače O této úloze...
Seznam šroubů POZNÁMKA: Při demontáži šroubků z určité komponenty se doporučuje poznačit si typ a množství šroubků a uložit je do krabičky na šrouby. Pak bude možné při zpětné montáži komponenty použít správný počet a typ šroubů. POZNÁMKA: Některé počítače mají magnetické povrchy. Ujistěte se, že při výměně komponenty nezůstávají šrouby přichycené k podobnému povrchu.
Display assembly M2.5x5 2.55 kgf-cm to 3.45 kgf-cm Displya panel assembly M2.5x2.5 2.55 kgf-cm to 3.45 kgf-cm M2.5x3.5 2.55 kgf-cm to 3.45 kgf-cm Hlavní komponenty počítače Dell Pro 16 PC16255 Následující obrázek znázorňuje hlavní komponenty počítače Dell Pro 16 PC16255. Manipulace uvnitř počítače...
Page 37
Obrázek 10. Major Components of your system/Exploded View 1. Base cover 2. Power-adapter port Manipulace uvnitř počítače...
Page 38
POZNÁMKA: Dell provides a list of components and their part numbers for the original computer configuration purchased. These parts are available according to warranty coverage purchased by the customer. Contact your Dell sales representative for purchase options. Manipulace uvnitř počítače...
Demontáž a instalace jednotek vyměnitelných zákazníkem (CRU) Výměnné komponenty v této kapitole jsou jednotky vyměnitelné zákazníkem. VÝSTRAHA: Zákazníci mohou vyměňovat pouze jednotky vyměnitelné zákazníkem (CRU), při dodržení bezpečnostních opatření a předepsaných postupů výměny. POZNÁMKA: Obrázky v tomto dokumentu se mohou lišit od vašeho počítače v závislosti na sestavě, kterou jste si objednali. Spodní...
Page 40
Obrázek 11. Removing the base cover Demontáž a instalace jednotek vyměnitelných zákazníkem (CRU)
Page 41
Obrázek 12. Removing the base cover Obrázek 13. Disconnecting the battery cable Kroky 1. Loosen the nine captive screws (M2.5x6) that secure the base cover to the chassis. 2. Using a plastic scribe, pry open the base cover starting from the U-shaped indents at the bottom edge of the base cover near the hinges.
7. Press and hold the power button for five seconds to ground the computer and drain the flea power. Installing the base cover Požadavky Jestliže nahrazujete určitou komponentu, vyjměte před montáží stávající komponentu. O této úloze The following images indicate the location of the base cover and provide a visual representation of the installation procedure. Obrázek 14.
Page 43
Obrázek 15. Installing the base cover Demontáž a instalace jednotek vyměnitelných zákazníkem (CRU)
Obrázek 16. Installing the base cover POZNÁMKA: If you have disconnected the battery cable, ensure to connect the battery cable. To connect the battery cable, follow step 1 in the procedure. Kroky 1. Connect the battery cable to the system board if the computer is not in service mode. 2.
● Pokud se baterie zasekne v počítači následkem vyboulení, nepokoušejte se ji uvolnit – propíchnutí, ohnutí nebo rozbití nabíjecí lithium-iontové baterie může být nebezpečné. V takovém případě kontaktujte technickou podporu společnosti Dell a vyžádejte si pomoc. Viz Kontaktovat podporu na stránkách podpory společnosti Dell.
Obrázek 17. Removing the battery Kroky 1. Use the pull tab to disconnect the battery cable from the connector (BATT1) on the system board. 2. Remove the screw (M2x4) that secures the battery to the palm-rest assembly. 3. Loosen the four captive screws (M2x3) that secure the battery to the palm-rest assembly. 4.
Page 47
Obrázek 18. Installing the battery Kroky 1. If the battery cable was removed for replacing the battery, you must transfer the battery cable from the old battery to the replacement battery. For more information, see Installing the battery cable. 2. Align the screw holes on the battery with the screw holes on the palm-rest assembly. 3.
Kabel baterie Removing the battery cable Požadavky 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. O této úloze The following image indicates the location of the battery cable and provides a visual representation of the removal procedure. Obrázek 19.
Další kroky 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Paměťový modul Removing the memory module Požadavky 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover.
Installing the memory module Požadavky If you are replacing a component, remove the existing component before performing the installation procedure. O této úloze The figure indicates the location of the memory module and provides a visual representation of the installation procedure. Obrázek 22.
Disk SSD Removing the solid state Drive (SSD) Požadavky 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. O této úloze The following image indicates the location of the solid state drive (SSD) and provides a visual representation of the removal procedure. Obrázek 23.
Obrázek 24. Installing the SSD Kroky 1. Align the notch on the SSD with the tab on the M.2 SSD slot on the system board. 2. Slide the M.2 2230 solid state drive into the SSD slot on the system board. 3.
Obrázek 25. Removing the wireless card Kroky 1. Remove the screw (M2x3) that secures the wireless-card bracket to the system board. 2. Lift the wireless-card bracket from the wireless card. 3. Disconnect the WLAN antenna cables from the wireless card. 4.
Page 54
Obrázek 26. Installing the wireless card Kroky 1. Connect the WLAN-antenna cables to the respective connectors on the wireless card. The following table provides the antenna-cable color scheme for the wireless card that is supported for your computer. Tabulka 32. WLAN-antenna cable color scheme Connectors on the wireless card Antenna-cable color Main - White triangle (△)
Další kroky 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Reproduktory Removing the speakers Požadavky 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. O této úloze The following image indicates the location of the battery and provides a visual representation of the removal procedure.
Kroky 1. Disconnect the speaker cable from the connector (SPK1) on the system board. 2. Unroute the speaker cable from the routing guides on the palm-rest assembly. 3. Remove the speakers from the palm-rest assembly. Installing the speakers Požadavky Jestliže nahrazujete určitou komponentu, vyjměte před montáží stávající komponentu. O této úloze POZNÁMKA: If the rubber grommets are pushed out when removing the speakers, push them back in place before replacing the...
Kroky 1. Using the alignment posts, place the speakers into their slots on the palm-rest assembly. POZNÁMKA: Ensure that the rubber grommets are seated into the slot and installed on the speakers properly. Obrázek 29. Rubber grommets 2. Route the speaker cables through the routing guides on the palm-rest assembly. 3.
Obrázek 30. Removing the fan Kroky 1. Disconnect the fan cable from the connector (FAN1) on the system board. 2. Remove the two screws (M2x3) that secure the fan to the system board. 3. Lift and remove the fan from the system board. Installing the fan Požadavky Jestliže nahrazujete určitou komponentu, vyjměte před montáží...
Page 59
Obrázek 31. Installing the fan Kroky 1. Place and align the screw holes on the fan with the screw holes on the system board. 2. Replace the two screws (M2x3) that secures the fan to the system board. 3. Connect the fan cable to the connector (FAN1) on the system board. Další...
VÝSTRAHA: Společnost Dell Technologies doporučuje, aby tyto postupy prováděli vyškolení technici VÝSTRAHA: Vaše záruka nekryje škody, ke kterým dojde během oprav typu FRU neschválených společností Dell Technologies. POZNÁMKA: Obrázky v tomto dokumentu se mohou lišit od vašeho počítače v závislosti na sestavě, kterou jste si objednali.
Obrázek 32. Removing the power-adapter port Kroky 1. Remove the three screws (M2.5x5) that secure the left display-hinge to the palm-rest assembly. 2. Lift the left display-hinge upward to access the power-adapter port. 3. Disconnect the power-adapter port cable from the connector (DCIN1) on the system board. 4.
Obrázek 33. Installing the power-adapter port Kroky 1. Align and place the power-adapter port on the system board. 2. Connect the power-adapter port cable to the connector (DCIN1) on the system board. 3. Gently press the left display-hinge in a downward direction towards the power-adapter port. 4.
Obrázek 34. Removing the heat sink Kroky 1. Loosen the four captive screws (M2x5.4) that secure the heat sink to the system board. POZNÁMKA: Loosen the captive screws in the reverse sequential order mentioned on the heat sink [4 > 3 > 2 > 1]. 2.
Obrázek 35. Installing the heat sink Kroky 1. Place the heat sink into its slot on the system board. 2. Align the screw holes on the heat sink to the screw holes on the system board. 3. Tighten the four captive screws (M2x5.4) that secure the heat sink to the system board. POZNÁMKA: Tighten the captive screws in the sequential order mentioned on the heat sink [1 >...
O této úloze The following images indicate the location of the I/O board and provide a visual representation of the removal procedure. Obrázek 36. Removing the I/O board Kroky 1. Remove the three screws (M2.5x5) that secure the right display-hinge to the chassis. 2.
Obrázek 37. Installing the I/O board Kroky 1. Place and align the screw holes on the I/O board with the screw holes on the palm-rest assembly. 2. Replace the three screws (M2x3) that secure the I/O board to the palm-rest assembly. 3.
Obrázek 38. Removing the I/O-board FPC cable Kroky 1. Open the latch and disconnect the I/O-board FPC cable from the connector (IO) on the I/O board. 2. Open the latch and disconnect the other end of the I/O-board FPC cable from the connector on the system board. 3.
Obrázek 39. Installing the I/O board Kroky 1. Slide the I/O-board FPC cable beneath the WLAN antenna cables. 2. Connect the I/O-board FPC cable to the connector on the system board and close the latch to secure the cable in place. 3.
Obrázek 40. Removing the power button with fingerprint reader Kroky Lift the power button from the slot in the palm-rest assembly. Installing the power button with a fingerprint reader VÝSTRAHA: The information in this installation section is intended for authorized service technicians only. Požadavky Jestliže nahrazujete určitou komponentu, vyjměte před montáží...
Obrázek 41. Installing the power button with a fingerprint reader Kroky Place the power button into its slot in the palm-rest assembly. Další kroky 1. Install the board. 2. Install the fan. 3. Install the base cover. 4. Follow the procedure in After working inside your computer.
Obrázek 44. Removing the system board Kroky 1. Remove the three screws (M2.5x5) that secure the left display-hinge to the palm-rest assembly. 2. Lift the left display-hinge in an upward direction away from the system board. 3. Disconnect the following cables from the respective connectors on the system board: ●...
Page 75
Obrázek 46. Installing the system board Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 76
Obrázek 47. Installing the system board Kroky 1. Align the screw holes on the system board with the screw holes on the palm-rest assembly. 2. Replace the three screws (M2x3) that secures the system board to the palm-rest assembly. 3. Replace the two screws (M2x5) that secures the Type-C module to the system board. 4.
9. Follow the procedure in After working inside your computer. Modul USB Type-C Removing the USB Type-C module VÝSTRAHA: The information in this removal section is intended for authorized service technicians only. Požadavky 1. Follow the procedure in Before working inside your computer.
Installing the USB Type-C module VÝSTRAHA: The information in this installation section is intended for authorized service technicians only. Požadavky Jestliže nahrazujete určitou komponentu, vyjměte před montáží stávající komponentu. O této úloze The following images indicate the location of the USB Type-C module and provide a visual representation of the installation procedure. Obrázek 49.
Klávesnice Removing the keyboard VÝSTRAHA: The information in this removal section is intended for authorized service technicians only. Požadavky 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the memory module.
Page 80
Obrázek 50. Removing the keyboard Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 81
Obrázek 51. Removing the keyboard Obrázek 52. Removing the keyboard Kroky 1. Disconnect the keyboard cable and the keyboard backlit cable from its connector on the touchpad. 2. Remove the 22 screws (M2x2.2) that secure the keyboard to the palm-rest assembly. 3.
Installing the keyboard VÝSTRAHA: The information in this installation section is intended for authorized service technicians only. Požadavky Jestliže nahrazujete určitou komponentu, vyjměte před montáží stávající komponentu. O této úloze The following images indicate the location of the keyboard and provide a visual representation of the installation procedure. Obrázek 53.
Page 83
Obrázek 54. Installing the keyboard Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 84
Obrázek 55. Installing the keyboard Kroky 1. Align the screw holes on the keyboard with the screw holes on the palm-rest assembly. 2. Connect the keyboard cable and the keyboard backlit cable to the connector on the touchpad. 3. Replace the 22 screws (M2x2.2) that secure the keyboard to the palm-rest assembly. Další...
Podpůrná deska klávesnice Removing the keyboard support plate VÝSTRAHA: The information in this removal section is intended for authorized service technicians only. Požadavky 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4.
Obrázek 57. Removing the keyboard support plate Kroky 1. Remove the eight (M2x2.2) screws that secure the keyboard to the keyboard support plate. 2. Lift the keyboard support plate off the keyboard. Installing the keyboard support plate VÝSTRAHA: The information in this installation section is intended for authorized service technicians only. Požadavky Jestliže nahrazujete určitou komponentu, vyjměte před montáží...
Page 87
Obrázek 58. Installing the keyboard support plate Obrázek 59. Installing the keyboard support plate Kroky 1. Align the screw holes on the keyboard with the screw holes on the keyboard support plate. 2. Replace the eight (M2x2.2) screws that secure the keyboard to the keyboard support plate. Další...
2. Install the power-adapter port. 3. Install the system board. 4. Install the board. 5. Install the display assembly. 6. Install the heat sink. 7. Install the fan. 8. Install the wireless card. 9. Install the SSD. 10. Install the memory module.
Obrázek 60. Removing the palm-rest assembly Installing the palm-rest assembly VÝSTRAHA: The information in this installation section is intended for authorized service technicians only. Požadavky Jestliže nahrazujete určitou komponentu, vyjměte před montáží stávající komponentu. O této úloze The following image shows the palm-rest assembly. Demontáž...
Page 90
Obrázek 61. Installing the palm-rest assembly Kroky Place the palm-rest assembly on a flat surface. POZNÁMKA: The touchpad is part of the palm-rest assembly. Další kroky 1. Install the keyboard. 2. Install the power-adapter port. 3. Install the system board. 4.
Sestava displeje Removing the display assembly VÝSTRAHA: The information in this removal section is intended for authorized service technicians only. Požadavky 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the wireless card.
Page 92
Obrázek 62. Removing the display assembly Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 93
Obrázek 63. Removing the display assembly Obrázek 64. Removing the display assembly Kroky 1. Place the system on a flat surface such that the palm-rest and keyboard assembly lies flat on the surface. Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
2. Unroute the WLAN antenna cables from the routing guides on the fan. 3. Peel away the mylar that secures the display cable to the system board. 4. Open the latch and disconnect the display cable from the connector (LCD1) on the system board. 5.
Obrázek 66. Installing the display assembly Kroky 1. Place the display assembly on a flat surface. 2. Slide the palm-rest keyboard assembly under the hinges of the display assembly. 3. Gently press down on the display hinges and align the screw holes on the display hinges with the screw holes on the palm-rest and keyboard assembly.
Page 96
2. Remove the base cover. 3. Remove the display assembly. O této úloze The following images indicate the location of the display bezel and provide a visual representation of the removal procedure. Obrázek 67. Removing the display bezel Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 97
Obrázek 68. Removing the display bezel Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 98
Obrázek 69. Removing the display bezel Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 99
Obrázek 70. Removing the display bezel Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Obrázek 71. Removing the display bezel Kroky 1. Insert a flat-head screwdriver (maximum width: 4 mm) into the slots on the display bezel near the hinges, and gently apply pressure to release the bezel at both ends, creating a gap. 2.
Page 101
O této úloze The following images indicate the location of the display bezel and provide a visual representation of the installation procedure. Obrázek 72. Installing the display bezel Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Obrázek 73. Installing the display bezel Kroky POZNÁMKA: The holding tape secures the camera shutter to the replacement display bezel. VÝSTRAHA: To avoid accidental removal or damage to the camera shutter on the replacement display bezel, avoid peeling off the holding tape abruptly. 1.
Page 103
3. Remove the display assembly. 4. Remove the display bezel. O této úloze The following images indicate the location of the display-panel assembly and provide a visual representation of the removal procedure. Obrázek 74. Removing the display-panel assembly Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 104
Obrázek 75. Removing the display-panel assembly Obrázek 76. Removing the display-panel assembly Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 105
Obrázek 77. Removing the display-panel assembly Kroky POZNÁMKA: The display-panel assembly is preassembled with the display brackets as a single service part. Do not pull the Stretch Release tapes and separate the brackets from the display-panel. Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
1. Remove the six (M2.5x2.5) screws and four (M2.5x3.5) screws that secure the left and right hinges to the display back cover. POZNÁMKA: While Removing the display-panel assembly, disengage the display-panel tabs from the display cover before flipping it over. 2.
Page 107
Obrázek 78. Installing the display-panel assembly Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Page 108
Obrázek 79. Installing the display-panel assembly Obrázek 80. Installing the display-panel assembly Demontáž a instalace jednotek vyměnitelných v terénu (FRU)
Obrázek 81. Installing the display-panel assembly Kroky POZNÁMKA: The display-panel assembly is preassembled with the display brackets as a single service part. Do not pull theStretch Release tapes to separate the brackets from the display-panel. 1. Place the display-panel assembly on a flat and clean surface. 2.
Požadavky 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the display assembly. 4. Remove the display bezel. 5. Remove the display-panel assembly. O této úloze The following image indicates the location of the camera and provides a visual representation of the removal procedure. Obrázek 82.
Obrázek 83. Installing the camera Kroky 1. Align and place the camera module on the slot on the display back cover. 2. Connect the camera cable to the camera module and reattach the clip. Další kroky 1. Install the display-panel assembly.
O této úloze The following image indicates the location of the eDP cable and provides a visual representation of the removal procedure. Obrázek 84. Removing the eDP cable Kroky 1. Disconnect the eDP cable from the connector (LCD1) on the camera module. 2.
Obrázek 85. Installing the eDP cable Kroky 1. Connect the eDP cable to the connector (LCD1) on the camera module. 2. Adhere the eDP cable to the display back cover. 3. Adhere the conductive tape and route the eDP cable to the display back cover. Další...
4. Remove the display bezel. 5. Remove the display-panel assembly. 6. Remove the camera. 7. Remove the cable. O této úloze The following image shows the display back-cover assembly and provides a visual representation of the removal procedure. Obrázek 86. Removing the display back-cover assembly Kroky After performing the steps in the pre-requisites, we are left with the display back-cover assembly.
Page 115
Obrázek 87. Installing the display back-cover assembly Kroky Place the display back-cover assembly on a clean and flat surface. Další kroky 1. Install the cable. 2. Install the camera. 3. Install the display-panel assembly. 4. Install the display bezel. 5. Install the display assembly.
POZNÁMKA: Pokud provedete downgrade počítače ze systému Windows 11 na systém Windows 10 22H2, podpora společnosti Dell Technologies se bude řídit plánem ukončení podpory systému Microsoft Windows 10. Ovladače a soubory ke stažení Při odstraňování problémů, stahování nebo instalaci ovladačů se doporučuje přečíst si článek 000123347 znalostní...
Nastavení systému BIOS POZNÁMKA: V závislosti na počítači a nainstalovaných zařízeních se nemusí některé z uvedených možností zobrazovat. VÝSTRAHA: Některé změny by mohly způsobit nesprávnou funkci počítače. Před změnou nastavení systému BIOS se doporučuje zapsat si původní nastavení pro pozdější potřeby. Nástroj pro konfiguraci systému BIOS použijte, když chcete: ●...
Depending on your computer and its installed devices, the items that are listed in this section may or may not be displayed. Tabulka 34. BIOS Setup options—Overview menu Overview Dell Pro 16 PC16255 BIOS Version Displays the BIOS version number. Service Tag Displays the Service Tag of the computer.
Page 119
Tabulka 34. BIOS Setup options—Overview menu (pokračování) Overview Ownership Tag Displays the Ownership Tag of the computer. Battery Information Primary Displays the primary battery of the computer. Battery Level Displays the battery level of the computer. Battery State Displays the battery state of the computer. Health Displays the battery health of the computer.
Page 120
Enables the computer to boot using only validated boot software. By default, the Enable Secure Boot option is disabled. For additional security, Dell Technologies recommends keeping the Secure Boot option is enabled to ensure that the UEFI firmware validates the operating system during the boot process.
Page 121
Tabulka 36. BIOS Setup options—Integrated Devices menu Integrated Devices Date/Time Date Sets the computer date in MM/DD/YYYY format. Changes to the date format take effect immediately. Time Sets the computer time in HH/MM/SS 24-hour format. You can switch between a 12-hour and 24-hour clock. Changes to the time format take effect immediately. Camera Enable Camera Enables the camera.
Page 122
Tabulka 36. BIOS Setup options—Integrated Devices menu (pokračování) Integrated Devices By default, the Enable Fingerprint Reader Device option is enabled. Dust Filter Maintenance Dust Filter Maintenance Enable or disable the dust filter maintenance. By default, the Disabled option is enabled. Microphone Mute Led Microphone Mute Led Enable or disable the LED status of Microphone.
Page 123
Tabulka 39. BIOS Setup options—Connection menu (pokračování) Connection By default, the Enabled with PXE option is enabled. Wireless Device Enable WLAN Enables or disables the internal WLAN device. By default, the WLAN option is enabled. Bluetooth Enables or disables the internal Bluetooth device. By default, the Bluetooth option is enabled.
Page 124
USB Wake Support Wake on Dell USB-C Dock When enabled, connecting a Dell USB-C Dock wakes the computer from Standby, Hibernate, and Power Off. By default, the Wake on Dell USB-C Dock option is enabled. Lid Switch Enable Lid Switch Enables or disables the Lid Switch.
Page 125
Absolute Absolute Absolute Software provides various cyber security solutions, some requiring software preloaded on Dell computers and integrated into the BIOS. To use these features, you must enable the Absolute BIOS setting and contact Absolute for configuration and activation. By default, the Absolute option is enabled.
Page 126
BIOS Events log. The computer fails to reboot until the event is cleared. By default, the Silent option is enabled. For additional security, Dell Technologies recommends keeping the Firmware Device Tamper Detection option is enabled. Clear Firmware Device Tamper Detection Allows you to clear the events that are logged when tampering of firmware device is detected.
Page 127
● The computer password is not prompted when the computer resumes from standby mode. Dell Technologies recommends using the computer password in situations where it is likely that a computer may be lost or stolen. M.2 PCIe SSD-0 The hard drive password can be set to prevent unauthorized access of the data stored on the solid-state drive.
Page 128
Tabulka 42. BIOS Setup options—Passwords menu (pokračování) Passwords of the passwords and require passwords to contain certain character classes (upper case, lower case, digit, special character). Dell Technologies recommends setting the minimum password length to at least eight characters. Password Changes Allow Non-Admin Password Changes...
Page 129
Allows you to control the automatic boot flow for SupportAssist System Resolution Console and for Dell OS Recovery Tool. By default, the Dell Auto OS Recovery Threshold value is set to 2. Tabulka 44. BIOS Setup options—System Management menu System Management Service Tag Displays the Service Tag of the computer.
Page 130
Tabulka 44. BIOS Setup options—System Management menu (pokračování) System Management Power-on-Self-Test Automatic Recovery Enable or disable the automatic recovery of the computer from no power or no-POST failure by applying mitigation steps. By default, the Power-On-Self-Test Automatic Recovery option is enabled. POZNÁMKA: To view this option, enable Advanced Setup mode as described in View Advanced Setup...
Page 131
This option is not available when the virtualization setting for IOMMU is disabled (VT-d/AMD Vi). By default, the Enable Pre-Boot DMA Support option is enabled. For additional security, Dell Technologies recommends keeping the Enable Pre-Boot DMA Support option is enabled. POZNÁMKA: This option is provided only for compatibility purposes, since some older hardware is not DMA capable.
Page 132
Tabulka 48. BIOS Setup options—Performance menu (pokračování) Performance By default, the Auto option is selected. Tabulka 49. BIOS Setup options—System Logs menu System Logs BIOS Event Log Clear BIOS Event Log Allows you to select option to keep or clear BIOS events logs. By default, the Keep Log option is selected.
1. Go to Dell Support Site. 2. Go to Search Dell or identify your product. In the box, enter the product identifier, model, service request or describe what you are looking for, and then click Search. POZNÁMKA: If you do not have the Service Tag, use the SupportAssist to automatically identify your computer. You can also use the product ID or manually browse for your computer model.
Chcete-li aktualizovat systém BIOS z jednorázové spouštěcí nabídky, budete potřebovat: ● jednotku USB naformátovanou na systém souborů FAT32 (jednotka nemusí být spustitelná), ● spustitelný soubor systému BIOS, který jste stáhli z webových stránek podpory Dell Support a zkopírovali do kořenového adresáře jednotky USB, ●...
VÝSTRAHA: Pokud počítač nepoužíváte, ujistěte se, že je uzamčen. Když počítač necháte bez dozoru, může kdokoli získat přístup k datům v počítači. Tabulka 51. Systémové heslo a heslo konfigurace Typ hesla Popis Heslo systému Heslo, které je třeba zadat pro spuštění operačního systému. Heslo konfigurace Heslo, které...
6. Stisknutím klávesy Y uložíte změny a ukončíte nástroj Konfigurace systému. Počítač se restartuje. Vymazání systémového hesla a hesla konfigurace O této úloze Potřebujete-li vymazat systémové heslo nebo heslo konfigurace, kontaktujte technickou podporu společnosti Dell dle návodu v části Kontaktovat podporu. POZNÁMKA: Více informací o způsobu resetování hesel k systému Windows nebo k určité aplikaci naleznete v dokumentaci k systému Windows nebo k dané...
● V případě použití baterie od jiného výrobce než společnosti Dell nebo nekompatibilní baterie hrozí zvýšené nebezpečí požáru nebo výbuchu. Baterii nahrazujte pouze kompatibilní baterií určenou pro váš počítač, kterou zakoupíte u společnosti Dell. V tomto počítači nepoužívejte baterie vyjmuté...
Dell. 4. V případě jakéhokoli problému se zobrazí chybové kódy. Chybový kód a ověřovací číslo si poznamenejte a obraťte se na společnost Dell. Automatický integrovaný test (BIST) (Vestavěný samočinný test základní desky) M-BIST M-BIST je vestavěný samočinný diagnostický nástroj základní desky, který zlepšuje přesnost diagnostiky závad vestavěného řadiče (EC) základní...
4. Pokud se zobrazuje chybový kód [2, 8], vyměňte základní desku. Vestavěný samočinný test displeje LCD (LCD-BIST) Notebooky Dell obsahují zabudovaný diagnostický nástroj, který v případě abnormálního chování obrazovky pomáhá určit, zda jde o důsledek vnitřní závady displeje LCD, nebo poruchy grafické karty (GPU) a špatného nastavení počítače.
LCD Power Rail Failure Obnovení operačního systému Jestliže se počítač ani opakovaných pokusech nemůže spustit do operačního systému, automaticky se spustí nástroj Dell SupportAssist OS Recovery. Dell SupportAssist OS Recovery je samostatný nástroj předinstalovaný v počítačích Dell s operačním systémem Windows. Obsahuje nástroje pro diagnostiku a odstraňování...
Režim obnovení pomocí nástroje klávesy Funkce Real Time Clock (RTC Reset) Funkce resetování hodin reálného času (RTC) umožňuje vám nebo servisnímu technikovi obnovit počítače Dell v situacích, kdy neproběhl test POST / chybí napájení / neproběhlo spuštění. Spusťte reset RTC s vypnutým systémem, připojeným k napájení. Stiskněte tlačítko napájení na 25 sekund. Reset RTC se v počítači spustí...
Page 142
POZNÁMKA: For more information about performing a hard reset, go to Dell Support Site. On the menu bar at the top of the Support page, select Support > Support Library. In the Search field on the Support Library page, type the keyword, topic, or model number, and then click or tap the search icon to view the related articles.
číslo. Po kliknutí nebo ťuknutí na ikonu vyhledávání se zobrazí odpovídající články. Kontaktování společnosti Dell Technologies Chcete-li kontaktovat společnost Dell Technologies ohledně prodeje, technické podpory nebo služeb zákazníkům, podívejte se do části Kontaktování podpory na stránkách podpory společnosti Dell.
Need help?
Do you have a question about the Pro 16 PC16255 and is the answer not in the manual?
Questions and answers