F-SECURE CLIENT SECURITY 9.00 - QUICK Quick Installation Manual page 23

Policy Manager Server will use as a repository. You can use the previous commdir as a backup, or
you can delete it once you have verified that Policy Manager Server is correctly installed.
• If no previous version has been installed, select
This will not require an existing commdir, and will create an empty commdir in the default location
(under <F-Secure Policy Manager 5 installation directory>\commdir).
5. Click Next to continue.
6. Click Next to continue.
7. Select the Policy Manager Server modules to enable:
• The Host module is used for communication with the hosts. The default port is 80.
• The Administration
HTTP port is 8080.
Note: If you want to change the default port for communication, you will also need to change the
HTTP Port Number
By default, access to the
secure way to use the product. When using a connection over a network, please consider securing the
communication with F-Secure SSH.
• The Web Reporting
be enabled. Web Reporting uses a local socket connection to the
server data. The default port is 8081.
By default, access to Web Reporting is allowed also from other computers. If you want to allow access
only from this computer, select
8. Click Next to continue.
9. Select the product installation package(s) to install from the list of available packages, then click
continue.
module is used for communication with Policy Manager Console. The default
setting in Policy Manager Console.
Administration module is restricted to the local machine. This is the most
module is used for communication with Web Reporting. Select whether it should
Restrict access to the local
F-Secure Client Security | Installing Policy Manager | 23
I do not have an existing F-Secure Policy
Administration
machine.
Manager.
module to fetch
Next to