F-SECURE CLIENT SECURITY 8.00 Getting Started Manual page 24

23 CHAPTER 3
8. Select whether you want to keep the existing settings or
change them.
This dialog is displayed only if a previous installation
of F-Secure Policy Manager Server was detected on
the computer.
By default the setup keeps the existing settings. Select this
option if you have manually updated the F-Secure Policy
Manager Server configuration file (HTTPD.conf). This
option automatically keeps the existing administration, host
and web reporting ports.
If you want to change the ports from the previous
installation, select the Change settings option. This option
overwrites the HTTPD.conf file, and restores the settings
to defaults.
9. Select the F-Secure Policy Manager Server modules to
enable:
Host module is used for communication with the hosts.
The default port is 80.
Administration module is used for communication with
F-Secure Policy Manager Console. The default HTTP port
is 8080.
If you want to change the default port for
communication, you will also need to change the
HTTP Port Number setting in F-Secure Policy
Manager Console.
By default the access to the Administration module is
restricted to the local machine. This is the most secure
way to use the product.