1. Manuals
  2. Brands
  3. iAIRE Manuals
  4. Air Conditioner
  5. M
  6. Iom manual

iAIRE M Iom Manual

Solar hvac residential multi-splits and mounting kits
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Solar HVAC - Model "M"
Residential Multi-Splits
and Mounting Kits
I/O/M manual
PD 04/14/2025 - v 1.00
PN IOM-0058

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M and is the answer not in the manual?

Questions and answers

Related Manuals for iAIRE M

Summary of Contents for iAIRE M

  • Page 1 Solar HVAC - Model “M” Residential Multi-Splits and Mounting Kits I/O/M manual PD 04/14/2025 - v 1.00 PN IOM-0058...

  • Page 2: Table Of Contents

    Wall Mount AHU Specifications ......................129 - 135 Mounting Kit General Assembly Instructions ....................136 Mounting Kit Floor and Roof Assembly Instructions ................. 137 Solar HVAC Multi-Split Plumbing Diagram ....................138 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 3: Air Conditioning And Heating

    The information, specifications and parameter are subject to change due to technical modification or improvement without any prior notice. The accurate specifications are presented on the nameplate label. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 4: Safety, Cleaning And Maintenance Information

    LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 5 LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 6 Appliance shall be installed, operated and stored in a room with a floor area larger than X m² Appliance shall not be installed in an unventilated space, if that space is smaller than X m² (Please see the following form). iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 7 LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 8: Part Number And Description

    Solar HVAC Multi-Split Part Numbering Scheme Model “Z” Multi-Split Part Number Scheme SH12P M - 45 6 - 7 Configuration (1,2) Options (7) Type Brand (3) BTU’s (4,5) CU/AHU (6) MU - Multi-Split AH P - Heat Pump M - Midea...

  • Page 9: Btu Heat Pump Part Number, Dimensions & Specifications

    Submittal Solar HVAC | Model “M” 1.5 Ton Multi-Split Residential Heat Pump SHMUPM-18 | Solar HVAC Model “M” Multi-Split Description Solar HVAC Model “Z” 1.5 Ton Mini-Split Part Numbering Scheme Part Number SHMUPM-180-0 Configuration Type Brand BTU’s CU/AHU Options MU - Multi-Split...
  • Page 10 Dimensions SHMUPM-180 | Solar HVAC Multi-Split Dimensions SHMUPM-18 | Solar HVAC Model “M” Multi-Split Dimensions Outdoor Unit: D (in) 24.0 L (in) 15.6 A (in) 36.2 W (in) B (in) 14.6 C (in) 31.1 www.myiaire.com | Toll Free 844-348-9168 Page 2...
  • Page 11 Dimensions SHMUPM-18 | Solar HVAC Model “M” Solar Box Dimensions SHRP-FB4 | Solar HVAC Residential Units Solar Box Dimensions Solar Box Weight: 50 lbs. 12.88 39.63 8.87 www.myiaire.com | Toll Free 844-348-9168 Page 3 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 12 Specifications SHMUPM-18 | Solar HVAC Model “M” Multi-Split Specifications SHMUPM-180 | Solar HVAC Model “M” Multi-Split Specifications SYSTEM PERFORMANCE DATA Power supply (Deg. ℉) 5~122 Outdoor(cooling) (Deg. °C) Normal Operational Voltage (V, Ph, Hz) 208/230V,1Ph，60Hz -15～50 Voltage Range 187-253 (Deg. ℉) -13～75...

  • Page 13: Btu Heat Pump Part Number, Dimensions & Specifications

    Submittal Solar HVAC | Model “M” 2 Ton Multi-Split Residential Heat Pump SHMUPM-24 | Solar HVAC Model “M” Multi-Split Description Part Number SHMUPM-240-0 Configuration Type Brand BTU’s CU/AHU Options MU - Multi-Split 0 - Condenser Only M - Midea P - Heat Pump...
  • Page 14 Dimensions SHMUPM-240 | Solar HVAC Multi-Split Dimensions SHMUPM-24 | Solar HVAC Model “M” Multi-Split Dimensions Outdoor Unit: www.myiaire.com | Toll Free 844-348-9168 Page 2 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 15 Dimensions SHRP-FB4 | Solar HVAC Residential Units Solar Box Dimensions SHMUPM-24 | Solar HVAC Model “M” Solar Box Dimensions Solar Box Weight: 50 lbs. 12.88 39.63 8.87 www.myiaire.com | Toll Free 844-348-9168 Page 3 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 16 Specifications SHMUPM-24 | Solar HVAC Model “M” Multi-Split Specifications SHMUPM-240 | Solar HVAC Model “M” Multi-Split Specifications SYSTEM PERFORMANCE DATA Power supply (Deg. ℉) 5~122 Outdoor(cooling) Normal Operational Voltage (V, Ph, Hz) 208/230V,1Ph，60Hz (Deg. °C) -15～50 Voltage Range 187-253 (Deg. ℉) -13～75...

  • Page 17: Btu Heat Pump Part Number, Dimensions & Specifications

    Submittal Solar HVAC | Model “M” 3 Ton Multi-Split Residential Heat Pump SHMUPM-36 | Solar HVAC Model “M” Multi-Split Description Solar HVAC Model “Z” 1.5 Ton Mini-Split Part Numbering Scheme Part Number SHMUPM-360-0 Configuration Type Brand BTU’s CU/AHU Options MU - Multi-Split...
  • Page 18 Dimensions SHMUPM-360 | Solar HVAC Multi-Split Dimensions SHMUPM-36 | Solar HVAC Model “M” Multi-Split Dimensions Outdoor Unit: www.myiaire.com | Toll Free 844-348-9168 Page 2 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 19 Dimensions SHRP-FB4 | Solar HVAC Residential Units Solar Box Dimensions SHMUPM-36 | Solar HVAC Model “M” Solar Box Dimensions Solar Box Weight: 50 lbs. 18.88 40.71 8.86 www.myiaire.com | Toll Free 844-348-9168 Page 3 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 20 Specifications SHMUPM-360 | Solar HVAC Model “M” Multi-Split Specifications SHMUPM-36 | Solar HVAC Model “M” Multi-Split Specifications SYSTEM PERFORMANCE DATA Power supply (Deg. ℉) 5~122 Outdoor(cooling) Normal Operational Voltage (V, Ph, Hz) 208/230V,1Ph，60Hz (Deg. °C) -15～50 Voltage Range 187-253 (Deg. ℉) -13～75...

  • Page 21: Btu Heat Pump Part Number, Dimensions & Specifications

    Submittal Solar HVAC | Model “M” 4 Ton Multi-Split Residential Heat Pump SHMUPM-48 | Solar HVAC Model “M” Multi-Split Description Solar HVAC Model “Z” 1.5 Ton Mini-Split Part Numbering Scheme Part Number SHMUPM-480-0 Configuration Type Brand BTU’s CU/AHU Options MU - Multi-Split...
  • Page 22 Dimensions SHMUPM-480 | Solar HVAC Multi-Split Dimensions SHMUPM-48 | Solar HVAC Model “M” Multi-Split Dimensions Outdoor Unit: www.myiaire.com | Toll Free 844-348-9168 Page 2 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 23 Dimensions SHRP-FB4 | Solar HVAC Residential Units Solar Box Dimensions SHMUPM-48 | Solar HVAC Model “M” Solar Box Dimensions Solar Box Weight: 100 lbs. 40.71 24.88 8.86 www.myiaire.com | Toll Free 844-348-9168 Page 3 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 24 Specifications SHMUPM-48 | Solar HVAC Model “M” Multi-Split Specifications SHMUPM-480 | Solar HVAC Model “M” Multi-Split Specifications SYSTEM PERFORMANCE DATA Power supply (Deg. ℉) 5~122 Outdoor(cooling) Normal Operational Voltage (V, Ph, Hz) 208/230V,1Ph，60Hz (Deg. °C) -15～50 Voltage Range 187-253 -13～75 (Deg.

  • Page 25: Btu Heat Pump Part Number, Dimensions & Specifications

    Submittal Solar HVAC | Model “M” 5 Ton Multi-Split Residential Heat Pump SHMUPM-60 | Solar HVAC Model “M” Multi-Split Description Solar HVAC Model “Z” 1.5 Ton Mini-Split Part Numbering Scheme Part Number SHMUPM-600-0 Configuration Type Brand BTU’s CU/AHU Options MU - Multi-Split...
  • Page 26 Dimensions SHMUPM-600 | Solar HVAC Multi-Split Dimensions SHMUPM-60 | Solar HVAC Model “M” Multi-Split Dimensions Outdoor Unit: www.myiaire.com | Toll Free 844-348-9168 Page 2 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 27 Dimensions SHRP-FB4 | Solar HVAC Residential Units Solar Box Dimensions SHMUPM-60 | Solar HVAC Model “M” Solar Box Dimensions Solar Box Weight: 100 lbs. 40.71 24.88 8.86 www.myiaire.com | Toll Free 844-348-9168 Page 3 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 28 Specifications SHMUPM-600 | Solar HVAC Model “M” Multi-Split Specifications SHMUPM-60 | Solar HVAC Model “M” Multi-Split Specifications SYSTEM PERFORMANCE DATA Power supply (Deg. ℉) 5~122 Outdoor(cooling) Normal Operational Voltage (V, Ph, Hz) 208/230V,1Ph，60Hz (Deg. °C) -15～50 Voltage Range 187-253 (Deg. ℉) -13～75...

  • Page 29: 24K Btu Ceiling Mount Ahu Specifications

    Model “M” Multi-Split Ceiling Mount 9K Indoor Unit Specifications INDOOR UNIT DATA INDOOR UNIT DATA Indoor fan motor Model ZKFP-46-8-1 Model ZKFP-46-8-1 Input 45.00 Output 46.0 0.00 Speed(Hi/Mi/Lo) (r/min) 600/520/460 Air flow & Noise level Indoor air flow (Hi (CFM) //352.94/305.88/270.59...
  • Page 30 Model “M” Multi-Split Ceiling Mount 12K Indoor Unit Specifications INDOOR UNIT DATA INDOOR UNIT DATA Model ZKFP-46-8-1 Input 45.00 Output 46.0 0.00 Speed(Hi/Mi/Lo) (r/min) Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //335.29/282.35/241.18 Indoor noise level (Hi/Med/Lo) [dB(A)] 40.5/35.5/31.5...
  • Page 31 Model “M” Multi-Split Ceiling Mount 18K Indoor Unit Specifications INDOOR UNIT DATA INDOOR UNIT DATA Indoor fan motor Model ZKFP-46-8-1 Input 45.00 Output 46.0 1.50 (r/min) 730/630/570 Speed(Hi/Mi/Lo) Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //562.35/485.29/438.82...
  • Page 32 Model “M” Multi-Split Ceiling Mount 24K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-45-8-1 Input Output 45.0 1.00 Speed(Hi/Mi/Lo) (r/min) 680/624/568/512 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) 764.71/705.88/635.29/547.06 Indoor noise level (Hi/Med/Lo) [dB(A)] 48/45.5/43...

  • Page 33: 60K Btu Duct Mount Ahu Specifications

    Model “M” Multi-Split Duct Mount 9K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-55-8-22-1 Input 130.00 Output 55.0 Speed(Hi/Mi/Lo) (r/min) 1170/1030/850 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //352.94/282.35/176.47 Indoor noise level (Hi/Med/Lo) [dB(A)] 33/30.5/27...
  • Page 34 Model “M” Multi-Split Duct Mount 12K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-55-8-22-1 Input 130.00 Output 55.0 Speed(Hi/Mi/Lo) (r/min) 1170/1030/850 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //352.94/282.35/176.47 Indoor noise level (Hi/Med/Lo) [dB(A)] 40/31.5/26.5...
  • Page 35 Model “M” Multi-Split Duct Mount 18K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-160-8-1-2 Input 90.00 Output 160.0 Speed(Hi/Mi/Lo) (r/min) 850/700/450 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //529.41/450.00/370.59 Indoor noise level (Hi/Med/Lo) [dB(A)] 40/37.5/35...
  • Page 36 Model “M” Multi-Split Duct Mount 24K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-160-8-1-2 Input 90.00 Output 160.0 Speed(Hi/Mi/Lo) (r/min) Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //775.47/693.06/434.88 Indoor noise level (Hi/Med/Lo) [dB(A)] 44/40/35.5...
  • Page 37 Model “M” Multi-Split Duct Mount 36K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-300-8-1 Input 250.00 Output 300.0 Speed(Hi/Mi/Lo) (r/min) 1130/1050/990 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //1081.76/912.35/702.94 Indoor noise level (Hi/Med/Lo) [dB(A)] 49.5/46.5/43.0...
  • Page 38 Model “M” Multi-Split Duct Mount 48K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-560-8-1-1 Input 560.00 Output 560.0 Speed(Hi/Mi/Lo) (r/min) 940/820/740 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) 1529.41/1529.41/1117.65/735.29 Indoor noise level (Hi/Med/Lo) [dB(A)] 54.5/50.5/47.5...
  • Page 39 Model “M” Multi-Split Duct Mount 60K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-700-8-1 Input 420.00 Output 700.0 Speed(Hi/Mi/Lo) (r/min) 1060/910/790 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) 2302.94/2155.88/1709.41/1261.76 Indoor noise level (Hi/Med/Lo) [dB(A)] 54/49.5/46...

  • Page 40: 60K Btu Floor Mount Ahu Specifications

    Model “M” Multi-Split Floor Mount 12K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFP-13-8-136+ZKFP-13-8-104 Input Output 13.0 0.50 Speed(Hi/Mi/Lo) (r/min) 992/884/776 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) 441.18/376.47/323.53/264.71 Indoor noise level (Hi/Med/Lo)
  • Page 41 Model “M” Multi-Split Floor Mount 18K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-90-8-1 1.00 Input 96.00 Output 90.0 1.50 Speed(Hi/Mi/Lo) (r/min) 950/850/750 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //548.24/485.29/420.59 Indoor noise level (Hi/Med/Lo) [dB(A)] 45.5/43/39...
  • Page 42 Model “M” Multi-Split Floor Mount 24K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-90-8-1 1.00 Input 96.00 Output 90.0 0.00 Speed(Hi/Mi/Lo) (r/min) 1350/1260/1120 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //758.82/708.24/598.24 Indoor noise level (Hi/Med/Lo) [dB(A)] 51/47.5/42...
  • Page 43 Model “M” Multi-Split Floor Mount 36K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-115-8-1 Input 130.0 Output 115.0 1.50 Speed(Hi/Mi/Lo) (r/min) 1300/1150/800 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //1036.47/917.06/637.65 Indoor noise level (Hi/Med/Lo) [dB(A)] 52.5/48.5/42.5...
  • Page 44 Model “M” Multi-Split Floor Mount 48K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-90-8-1 Input 96.0 Output 90.0 1.80 Speed(Hi/Mi/Lo) (r/min) 1320/1200/1120 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //1352.94/1117.65/1000.00 Indoor noise level (Hi/Med/Lo)
  • Page 45 Model “M” Multi-Split Floor Mount 60K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Model ZKFN-160-8-1-2 Input Output 160.0 2.40 Speed(Hi/Mi/Lo) (r/min) 1350/1050/850 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No duct) (CFM) //1384.12/1028.82/795.29 Indoor noise level (Hi/Med/Lo)

  • Page 46: 24K Btu Wall Mount Ahu Specifications

    Model “M” Multi-Split Wall Mount 9K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Indoor fan motor Type Cross-Flow Type Cross-Flow Model ZKFP-20-8-6-21 Input 50.0 0.25 Winding Resistance (Ω) Capacitor (uF) Speed(Hi/Mi/Lo) (r/min) 1100/850/700 Air flow & Noise level...
  • Page 47 Model “M” Multi-Split Wall Mount 12K Indoor Unit Specifications INDOOR UNIT DATA Indoor fan motor Type Cross-Flow Model ZKFP-20-8-6-21 Input 50.0 0.25 Winding Resistance (Ω) Capacitor (uF) Speed(Hi/Mi/Lo) (r/min) 1050/930/870 Air flow & Noise level Indoor air flow (Hi/Med/Lo) (No...
  • Page 48 Model “M” Multi-Split 18K Wall Mount Indoor Unit Specifications 22022011016461 Indoor unit code Indoor fan motor Type Cross-Flow Model ZKFP-30-8-3-10 Set Model ACIQ-18W-HH-MB Indoor unit model Input 36.0 Ceritified AHRI Winding Resistance (Ω) Capacitor (uF) Speed(Hi/Mi/Lo) (r/min) 1240/1024/916 Air flow & Noise level...
  • Page 49 Model “M” Multi-Split 24KWall Mount Indoor Unit Specifications 22022011016461 Indoor unit code Indoor fan motor Type Cross-Flow Model ZKFP-58-8-1-6 Set Model ACIQ-18W-HH-MB Indoor unit model Input 58.0 Ceritified AHRI Winding Resistance (Ω) Capacitor (uF) Speed(Hi/Mi/Lo) (r/min) 1000/850/700 Air flow & Noise level...

  • Page 50: 60K Heat Pump And Ahu Clearances

    SHMUPM-xx | Solar HVAC Model “M” Multi-Split Clearances Space to the wall At least 15cm/0.49ft At least 15cm/0.49ft Space to the wall Space to the obstruction Space to the floor Space to the obstruction Drainage pipe Connecting wire SUB-0029-Z3DF PD 02/18/23 V02.06...

  • Page 51: Solar Box Mounting Kit Part Numbers And Descriptions

    SLR-RCK-1448836-DEED – 50-Ton Rack (4 Solar Boxes) Wall Mounted Floor Mounted Roof Mounted SLR-RCK-1448836-EEDE – 55-Ton Rack (4 Solar Boxes) SLR-RCK-1448836-EEEE – 60-Ton Rack (4 Solar Boxes) SUB-0029-Z5DF PD 02/18/23 V02.06 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M PNS-0032 PD 05/30/2024 - v 1.01...

  • Page 52: Ton Mounting Kit Dimensions

    27 7/16" 21 7/8" back strut channel to 696.7mm 3 5/16" 556mm mount to any wall. 83.9mm Approximate “Minimum” Angle Approximate “Maximum” Angle SUB-0030-SLR-MNT-1.25 PD 06/29/23 V01.00 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 53: Ton Mounting Kit Dimensions

    41 3/16" 29 13/16" to any position along 1045.9mm 3 7/16" 757.7mm back strut channel to 87.6mm mount to any wall. Approximate “Minimum” Angle Approximate “Maximum” Angle SUB-0030-SLR-MNT-2.50 PD 06/29/23 V01.00 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 54: Ton Mounting Kit Dimensions

    41 11/16" to any position along 30 1/8" 1058.4mm back strut channel to 765.6mm 3 7/16" mount to any wall. 87.6mm Approximate “Minimum” Angle Approximate “Maximum” Angle SUB-0030-SLR-MNT-3.75 PD 06/29/23 V01.00 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 55: Ton Mounting Kit Dimensions

    60° Cross braces adjustable to any position along back strut channel to 3 7/16" 30 1/8" 41 11/16" mount to any wall. 87.6mm 765.6mm 1058.4mm Approximate “Minimum” Angle Approximate “Maximum” Angle iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 56: Pcb Layouts

    PCB board of ACIQ-18Z-HH-M2B, ES-27Z-M3B, ACIQ-27Z-HH-M3B, ES-36Z-M4B Name Meaning T3: condenser temperature sensor T3/T4 CN17 T4: outdoor ambient temperature sensor connect to discharge sensor TESTPORT CN26 connect to DR board CN1 LOW/HIGH CN14 Red: low pressure protect iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 57 DC Pulse wave) Current loop communication C, signal wire, connect to the terminal (24V CN20 DC Pulse wave) Current loop communication D, signal wire, connect to the terminal (24V CN16 DC Pulse wave) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 58 L-Out connect to main board N-Out CN_Reactor CN2/CN3 connect to reactor CN_COMP CN_COMP connect to compressor connect to main board CN21 AN_DC CN14 connect to outdoor DC fan iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 59 CN38 connect to 4 way valve, 208-230V AC when is ON. HEAT_Y CN8/CN20 connect to compressor heater, 208-230V AC when is ON CN28 connect to evaporator coil outlet temperature sensor T2B iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 60 (5VDC Pulse wave) SENSOR connect to high and low pressure switch(pin1-pin2&pin3-pin4:5VDC H-PRO,L-RPO CN29 pulse wave) TESTPORT CN24 used for testing CN27 connect to key board CN1 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 61 PCB Layouts (cont’d) PCB Board of ACIQ-48Z-HH-M5B, ACIQ-36Z-HH-M4B, ES-48Z-M5B, ES-55Z-M5B & ACIQ-55Z-HH-M5B iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 62 Expansion CN30 connect to Electric Expansion Valve D valve CN33 connect to Electric Expansion Valve E CN38 connect to Electric Expansion Valve F connect to IPM&PFC board CN9 CN22 485 communication iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 63 PCB Layouts (cont’d) IPM board of ACIQ-48Z-HH-M5B , ACIQ-36Z-HH-M4B, ES-48Z-M5B, ES-55Z-M5B & ACIQ-55Z-HH-M5B iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 64 L-Out Power Supply connect to main board N-Out Connect to main PCB CN6 FAN_DC FAN_1/FAN_2 connect to outdoor DC fan 1& DC fan 2 CN_COMP Connect to compressor iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 65: Electronic Controller Information

    ----If TA≦T5<TB, maintain the current frequency. ----If the temperature increase and T5 ≧ TB, decrease the frequency to a lower level every 2 minutes till to F1. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 66 Cooling T4≥50℃ current limit value CoolT4Zone4I Cooling 49＞T4≥45℃ current limit value CoolT4Zone3I Cooling 44＞T4≥41℃ current limit value CoolT4Zone2I Cooling 40﹥T4≥33℃ current limit value CoolT4Zone1I Cooling 32＞T4℃current limit value CoolStopI Cooling stop protection current value iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 67 HeatT4Zone2I Heating 9℃＞T4≥6℃ current limit value HeatT4Zone1I Heating 5℃＞T4≥-4℃ current limit value HeatT4Zone0I Heating -5℃＞T4≥-9℃ current limit value HeatT4Zone- Heating -10℃＞T4 current limit value HeatStopI Heating stop protection current value iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 68 Total capacity Request=Σ(Norm code × HP) /10× modify rate+ correction For All new models(New Wall mounted(Hi-Wall) series, New Duct/Cassette/Console/Floor Ceiling): Total capacity Request=Σ(Norm code × HP) /40× modify rate+ correction ∑ iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 69 ℃ Fmax= T4FREMAXC0 51.5 50.5 Fmax= T4FREMAXC1 45.5 44.5 Fmax= T4FREMAXC2 Fmax= T4FREMAXC3 Fmax= T4FREMAXC4 Fmax= T4FREMAXC5 Fmax= T4FREMAXC6 Fmax= T4FREMAXC7 Fmax= T4FREMAXC8 Fmax= T4FREMAXC9 Fmax= T4FREMAXC10 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 70 2) If the compressor cumulative running time reaches 35 minutes and T3< TCDI2 and T3＋ T30SUBT3TWO≦T30. 3) If the compressor cumulative running time reaches 40 minutes and T3< -24C for 3 minutes. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 71 ----T3 rises above than TCDE1℃. ----T3 remains at TCDE2℃ or above for 80 seconds. ----The machine runs for 10 consecutive minutes in defrosting mode. Defrosting Action： ： iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 72 When T3≥38 ℃ (100.4 ℉) or when T4≥15 ℃ (59 ℉), the outdoor fan chooses a speed according to T4 again. Exit low ambient cooling mode run with high fan for 1 minute iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 73 0P will be maintained. 2.2 Reverse the valve to close the PMV_CLOSE_EE step (after closing the valve to the 0P, and then continue to run PMV_CLOSE_EE in the valve closing direction, iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 74 ---- If average+2≥the T2≥ average-2, the relevant valve’s open range remains as is ----If the T2＜average-2, the relevant valve needs to open 16p more This modification is carried out every 2 minutes. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 75: 60K Manual Operations, Maintenance And Installation

    18k - 60k Manual Operations and Maintenance iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 76 18k - 60k Installation Summary iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 77 NOTE: The installation must be performed in accordance with the requirements of local and national standards. The installation may vary in different regions. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 78: 60K Outdoor Specifications And Installation

    18k - 60k Outdoor Specifications NOTE: The Max. length for one indoor unit with Quick connector is 50' (15m). Note: Please see page 78 for schematic to add solar box to the system. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 79 18k - 60k Outdoor Unit Installation Install the unit by following local codes and regulations. Note: Please see page 78 for schematic to add solar box to the system. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 80 The drain joint will click in place. Connect a drain hose extension (not included) to the drain joint to redirect water from the unit during heating mode. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 81 2. Using a 2.5" (65mm) core drill, drill a hole in the wall. NOTE: When drilling the wall hole, make sure to avoid wires, plumbing, and other sensitive components. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 82: Multiple Ahu Plumbing

    Multiple AHU Plumbing iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 83: Refrigerant Piping Connection

    Refrigerant Piping Connection iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 84 Connect the copper pipes to the indoor unit rst, then connect it to the outdoor unit. You should rst connect the low-pressure pipe, then the high-pressure pipe. 1. Align the center of the two pipes that you will connect. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 85 NOTE: DO NOT intertwine signal cable with other wires. While bundling these items together, do not intertwine or cross the signal cable with any other wiring. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 86: Wiring Diagrams

    ELECTRICAL WORK, READ This may cause distortion and THESE REGULATIONS interference. No other equipment should be connected to the same power circuit. Connect the outdoor wires before connecting the indoor wires. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 87 2. Remove the electric cover of the outdoor unit. purpose only. Your machine may be If there is no cover on the outdoor unit, take slightly different. and remove the protection board. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 88 Run the main power cord through the lower line-outlet of the cord clamp. ---- This symbol indicates field wiring. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 89 Wiring (cont’d) NOTE: Use the magnetic ring ( not supplied, optional part) to hitch the connective cable of indoorand outdoor units after installation. One magnetic ring is used for each cable. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 90 Wiring (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 91 Wiring (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 92 Wiring (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 93 . Please contact your distributor or installer to get further information and purchase magnetic rings (The supplier of magnetic ring is TDK model ZCAT3035-1330 or similar) . iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 94: Air Evacuation

    Compound Meter reads -76cmHG (-1x105Pa). 6. Close the manifold gauge’s Low Pressure valve and turn o 7. Wait for 5 minutes, then check that there has been no change in system pressure. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 95 Depending on the length of connective piping or the pressure of the evacuated system, you made need to add refrigerant. Refer to table below for refrigerant amounts to be added: The standard pipe length is 25' (7.5m). iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 96: Safety And Leakage Check

    Safety and Leakage Check iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 97: Remote Control Instructions

    • the remote control will have no effect. When there are wide differentces between “Remote controller Manual” and “USER’S • MANUAL” on function description, the description of “USER’S MANUAL” shall prevail. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 98: Handling The Remote Controller

    The unit will beep when remote signal is • received. Curtains, other materials and direct sunlight • can interfere with the infrared signal receiver. Remove batteries if the remote will not be • used more than 2 months. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 99 RG10A2(D2S)/BGEFU1,RG10Y2(D2S)/BGEF Model: RG10A10(D2S)/BGEF(20-28 C/68-82 F) RG10A(D2S)/BGEF & RG10A(D2S)/BGEFU1(Fresh feature is not available) RG10A2(D2S)/BGCEFU1 & RG10A2(D2S)/BGCEF (Cooling only models, AUTO mode and HEAT mode are not available) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 100 Starts and stops the horizontal Enables unit to reach pr louver movement. Hold down temperature in shortest for 2 seconds to initiate vertical possible time louver auto swing feature. Model: RG10A1(D2S)/BGEF iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 101 RG10B(D2)/BGEF(Fresh feature is not available) Model: RG10B10(D2)/BGEF & RG10B10(D2)/BGCEF(20-28 C/68-82 F) RG10B2(D2)/BGCEF & RG10B10(D2)/BGCEF (Cooling only model, AUTO mode and HEAT mode are not available ) RG10Y1(D2)/BGEF iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 102 Enables unit to reach preset temperature in shortest SWING possible time Starts and stops the horizontal louver movement. Hold down for 2 seconds to initiate vertical louver auto swing feature(some units). Model: RG10B1(D2)/BGEF iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 103 AU-100%. Note: All indicators shown in the figure are for the purpose of clear presentation. But during the actaul operation, only the relative function signs are shown on the display window. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 104: How To Use Basic Functions

    Select FAN mode Turn on the air conditioner Set the fan speed MODE NOTE: In FAN mode, you can’t set the temperature. As a result , no temperature displays in remote screen. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 105 2.5h later (3:30PM) and turn off at 6:00PM. Current 3:30PM 2:00PM 3:00PM time 1PM 2.5 hours later 5 hours later iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 106: How To Use Advanced Functions

    Press this button to turn on and turn off the indoor unit will display the actual room the display on the indoor unit. temperature. Press more than 5 seconds again will revert back to display the setting temperature. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 107 (if activated). If pushing more than 2 seconds, the system will automatically restore the current operation settings including operating mode, setting temperature, fan speed level and sleep feature (if activated ). iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 108 Press together Clean button and Turbo button at the Clean Turbo same time more than 5 seconds to activate Lock function. All buttons will not response except pressing these two buttons for two seconds again to disable locking. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 109 Choose AP mode to do wireless network configuration. For some units, it doesn’t work by pressing the SET button. To enter the AP mode, continuously press the LED button seven times in 10 seconds. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 110: Ceiling Mount Ahu Specifications

    Model “M” Ceiling Mount AHU Installation iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 111 Model “M” Ceiling Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 112 Model “M” Ceiling Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 113 Model “M” Ceiling Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 114 Model “M” Ceiling Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 115 Model “M” Ceiling Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 116 Model “M” Ceiling Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 117: Duct Mount Ahu Specifications

    Model “M” Duct Mount AHU Installation iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 118 Model “M” Duct Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 119 Model “M” Duct Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 120 Model “M” Duct Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 121 Model “M” Duct Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 122 Model “M” Duct Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 123 Model “M” Duct Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 124: Floor Mount Ahu Specifications

    Model “M” Floor Mount AHU Installation iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 125 Model “M” Floor Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 126 Model “M” Floor Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 127 Model “M” Floor Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 128 Model “M” Floor Mount AHU Installation (cont’d) iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 129: Prior To Installation

    However, the unit can accommodate piping to provided. Then secure the mounting plate to both the left and right. the wall by tightening the screws directly into the clip anchors. iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...
  • Page 130 Model “M” Wall Mount AHU Installation (cont’d) Step 3: Drill wall hole for connective piping Unit: mm(inch) 1. Determine the location of the wall hole based Horizontal direction ruler on the position of the mounting plate. Refer to Mounting Plate Dimensions.
  • Page 131 Model “M” Wall Mount AHU Installation (cont’d) Step 4: Prepare refrigerant piping The If refrigerant piping is already embedded in the refrigerant piping is inside an insulating sleeve wall, do the following: attached to the back of the unit. You must prepare...
  • Page 132 Model “M” Wall Mount AHU Installation (cont’d) If there is no refrigerant piping embedded in the wall, do the following: Open the cover and unscrew the Based on the position of the wall hole relative screws to the mounting plate, choose the side from which the piping will exit the unit.
  • Page 133 Model “M” Wall Mount AHU Installation (cont’d) Step 5: Connect drain hose BEFORE PERFORMING ANY By default, the drain hose is attached to the left- ELECTRICAL WORK, READ THESE hand side of unit (when you’re facing the back of REGULATIONS the unit).
  • Page 134 Model “M” Wall Mount AHU Installation (cont’d) Step 6: Connect signal and power cables WARNING The signal cable enables communication between the indoor and outdoor units. You must first choose the right ALL WIRING MUST BE PERFORMED cable size before preparing it for connection. Cable...
  • Page 135 Model “M” Wall Mount AHU Installation (cont’d) DO NOT INTERTWINE SIGNAL CABLE WITH OTHER WIRES While bundling these items together, do not intertwine or cross the signal cable with any other wiring. 2. Using adhesive vinyl tape, attach the drain hose to the underside of the refrigerant pipes.

  • Page 136: Mounting Kit General Assembly Instructions

    20.000in 508mm DETAIL C SCALE 1 : 8 BLT HHCS 3_8-16X1 GR5 ZP LW 3/8 FW 3/8" Strut Chnl Brkt, Elbow, 5-3/8" x 3-1/2", ZP DETAIL B SCALE 1 : 8 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 137: Mounting Kit Floor And Roof Assembly Instructions

    To mount Solar Box to a floor or roof, lay the frame with the cross braces on the bottom facing downward. Assembly of components are exactly the same as the wall mounting configuration; see previous page for detailed instructions. Wall Mounted Floor Mounted Roof Mounted iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

  • Page 138: Solar Hvac Multi-Split Plumbing Diagram

    SOLAR HVAC MULTI-SPLIT SCH-0037-P HP PIPING DIAGRAM Solar HVAC Multi-Split Plumbing Diagram REVISION: V0 0 1 1 . . 0 0 0 0 iAIRE, LLC SHVAC Residential Multi-Split and Mounting Kit I/O/M...

This manual is also suitable for:

Shmupm-24Shmupm-18Shmupm-36Shmupm-48Shmupm-60

Table of Contents