Before reading this manual This manual contains basic instructions on installing and using Hybrid Network Video Recorder, an IDIS product. Users who are using this product for the first time, as well as users with experience using comparable products, must read this manual carefully before use and heed to the warnings and precautions contained herein while using the product.
Page 3
Before reading this manual Important Safeguards 1. Read Instructions 14. Damage requiring Service All the safety and operating instructions should be read before the appliance Unplug this equipment from the wall outlet and refer servicing to qualified is operated. service personnel under the following conditions: 2.
Before reading this manual In-Text Symbol Type Description Caution Important information concerning a specific function. Note Useful information concerning a specific function. User’s Caution Statement Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
IDIS Co., Ltd. reserves all rights concerning this manual. Use or duplication of this manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this manual are subject to change without prior notice.
Part 1 – Introduction Product Features This is a Hybrid video recorder that supports surveillance, recording, and playback of video from analog cameras and network cameras (or video encoders). This NVR (Network Video Recorder) unit offers the following features: ● Real-time channels surveillance ●...
Part 1 – Introduction Accessories Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included. Hybrid Network Video Recorder Power Adapter/Power Cable Quick Guide Optical USB Mouse...
Part 1 – Introduction Overview Front Panel HDD/Network/Alarm LEDs USB Ports • Access various windows and menus using a USB mouse as you would on a personal computer. • For easier system configuration, a USB mouse is recommended. 1 LEDs ●...
Part 1 – Introduction Connections on the Front Panel Flash Memory Mouse USB HDD Rear Panel Power In Port RJ-45 Video Input Port Network ClientPort VGA Out Port Alarm Connection HDMI Out Port Audio Connection Ports Video Input Port Ports RS-232 Port RS-485 Port...
Part 1 – Introduction Rear Panel Connections Network Client Connection Power Cable Connection Connect the power cable to this port. This NVR does not feature a separate power on/off button and will turn on the moment power is supplied. This NVR is capable of connecting to networks via the 10Mb/100Mb ethernet connector.
Page 13
Part 1 – Introduction ● GND (Ground) • This NVR does not feature a built-in audio amplifier unit and therefore requires the user to purchase a Connect alarm in or out's ground cable to the GND speaker system with a built-in amplifier separately. connector.
Page 14
Part 1 – Introduction Video Connection Refer to the following for pin-out details for the 9-pin connector of the slave unit. Analog Video Input Male Female Pin 2 RXD (Receive Data) Pin 3 TXD (Transmit Data) Pin 5 GND (Ground) Connect the coaxial cables from the video sources to the composite Video In connectors.
Page 15
Part 1 – Introduction Connections on the Rear Panel Power DirectIP Gigabit PoE Switch Network Network Camera IDIS Center Remote Keyboard Monitoring VGA Monitor Analog Camera Sensor Alarm Microphone HDMI Monitor Speaker...
Part 2 - Appendix System Log Types Boot Up Panic Off System Shutdown Clear All Data Restart Clear Disk Upgrade Success Format Disk Upgrade Error Disk Full Power Failure Auto Deletion Time Changed Search Begin Time Zone Change Search End Time Sync.
Part 2 - Appendix Error Code Types Upgrade Error Codes Type Type Unknown Error Remote Network Error Incorrect File Version No Remote Upgrade Permission Incorrect OS Version Remote Upgrade File Save Failure Incorrect Software Version Remote Upgrade Cancelled by User Incorrect Kernel Version USB Storage Device Mount Failure Storage Device Mount Failure...
Page 18
Part 2 - Appendix Network Error Codes Type Type Cause of Failure Unknown Connection Cancelled by User Normal Logout No Response from Network Device Host All Channels in Use - Connection Denied High Network Noise Level Incorrect Product Version Info Transmission Queue Full Incorrect User Name or Password Incorrect OEM Info...
Part 2 - Appendix Troubleshooting Problem Solution ● Check the power cable connection status. The main unit won't turn on. ● Check the power outlet. ● Check the camera's video cable connection status. ● Check the monitor's video cable connection status. ●...
Fast Ethernet(Client) x 1 Client Connection Fast Ethernet(Video In) x1 Transmission Speed 50Mbps Email (attach clip (.cbf, .MP4)), Callback to Remote S/W, Push notification (IDIS Event Notification Mobile), NetFS(FTP) INTERFACE Local(NVR) : 4 / 1RCA + 1HDMI Audio In / Out...
Page 21
Part 2 - Appendix GENERAL Operating System Embedded Linux Unit Dimensions (W x H 340mm x 46.5mm x 315.2mm (11.38" x 1.83" x 12.40") x D) Unit Weight 3.16kg (with 2 HDDs) Working Temperature 0°C – 40°C (32°F ~ 104°F) Operating Humidity 0% –...
Page 22
IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...
Need help?
Do you have a question about the TR-2604 and is the answer not in the manual?
Questions and answers