Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bosch SMV6ZDX16E
Summary of Contents for Bosch SMV6ZDX16E
- Page 1 Dishwasher SMV6ZDX16E [en] Information for Use...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 7 Additional functions .... 22 1.1 General information.... 4 8 Features........ 22 1.2 Intended use...... 4 8.1 Top basket....... 23 1.3 Restriction on user group.. 4 8.2 Knife shelf........ 23 1.4 Safe installation ...... - Page 3 12.3 Information on detergents .. 32 19.3 Transporting the appliance ... 54 12.4 Adding detergent.... 32 19.4 Disposing of old appliance ... 54 13 Tableware ........ 33 20 Customer Service.... 54 13.1 Damage to glass and table- 20.1 Product number (E-Nr.), ware........ 34 production number (FD) and consecutive numbering 13.2 Arrange tableware ....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. ▶ Check that there is a distance of at least 5 cm between the ap- pliance and installation lines. - Page 7 Safety en Highly caustic alkaline or highly acidic cleaning agents in conjunc- tion with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in con- junction with aluminium parts (e.g.
-
Page 8: Damaged Appliance
en Safety WARNING ‒ Risk of burns! The blow opening of the Zeolith container becomes hot and can cause burns. ▶ Never touch the blow opening of the Zeolith container. 1.6 Damaged appliance WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶... - Page 9 Safety en Children may become trapped in the appliance and suffocate. ▶ Use the childproof lock if fitted. ▶ Never let children play with or operate the appliance. WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk.
-
Page 10: Preventing Material Damage
en Preventing material damage Modified or damaged water hoses Preventing material damage 2 Preventing material may result in material damage and damage to the appliance. damage Never kink, crush, modify or cut ▶ through water hoses. Preventing material damage 2.1 Safe installation Only use the water hoses supplied ▶... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en So as not to scratch the finish on 3.3 Zeolith drying ▶ the appliance, do not use sponges The appliance features a Zeolith con- with a rough surface or abrasive tainer. Zeolith drying lets you save cleaning agents. -
Page 12: Installation And Connection
en Installation and connection Sensor set- Description Installation and connection 4 Installation and con- ting nection SE:00 Optimum setting for a mixed load and To ensure proper operation, connect Installation and connection heavily soiled table- the appliance to the power and water ware. -
Page 13: Drainage Connection
Installation and connection en installing it under a continuous work- 4.4 Drinking water connec- top that is securely connected to ad- tion jacent cabinets. Follow the safety instructions. Connect your appliance to a drinking → Page 4 water connection. Follow the instructions for electrical Installing the drinking water connection. -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD num- ber → Page 55. - Page 15 Familiarising yourself with your appliance en Detergent dispenser Add detergent to the detergent dispenser. → "Detergent", Page 31 Bottom basket Bottom basket → Page 24 Dispenser for special salt Add special salt to the dispenser for spe- cial salt. → "Water softening system", Page 27 Lower spray arm The lower spray arm washes the table- ware in the bottom basket.
-
Page 16: Controls
en Familiarising yourself with your appliance 5.2 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions. ON/OFF button and reset Switching on the appliance button → Page 36 Switching off the appliance... -
Page 17: Programmes
Familiarising yourself with your appliance en Programme buttons and addi- Programmes tional functions → "Programmes", Page 19 Additional functions → "Additional functions", Page 22 Start button Starting the programme → Page 37 WLAN display Home Connect → Page 41 Water supply display Display for water supply Door handle Open the appliance door. Special salt refill indicator Water softening system → "Adding special salt", Page 28... - Page 18 en Familiarising yourself with your appliance Symbol Description If you have activated the electronic start timer, the symbol lights up on the display. → "Setting timer pro- gramming", Page 36 If the water inflow or drainage malfunctions, the symbol lights up or flashes on the display. → "Troubleshooting", Page 47...
- Page 19 Programmes en Programmes 6 Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
-
Page 20: Information For Test Institutes
en Programmes Programme Programme se- quence Tableware: Particularly gentle: ¡ Delicate tableware, cutlery, tem- ¡ Pre-Rinse Glass 40° perature-sensitive plastics, ¡ Cleaning 40 °C glasses and stemware ¡ Intermediate rinse Level of soiling: ¡ Final rinse 50 °C ¡ Lightly adhering fresh food rem- ¡... -
Page 21: Intelligent
Programmes en Tip: You can use the Home Connect app to download additional pro- grammes and save them to the button. Saving Favourite on the appliance Open the appliance door. Press . Press the right programme button. Press the button for the relevant additional function. -
Page 22: Additional Functions
en Additional functions Additional functions 7 Additional functions You can find an overview of the additional functions that can be selected here. Additional functions Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration. You can se- lect certain additional functions depending on the programme. -
Page 23: Top Basket
Features en Raise or lower the basket evenly to 8.1 Top basket the right level. Arrange cups, glasses and small items of tableware in the top basket. Check that the basket is level on both sides. Release the levers. Knife shelf a The basket clicks into position. You can adjust the height of the top Slide the basket back in. -
Page 24: Etagere
en Features 8.3 Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. 8.5 Folding prongs Use the folding prongs to position tableware securely, e.g. plates. If you do not need the cutlery shelf, you can fold it up. -
Page 25: Cutlery Basket
Features en Push the lever forwards and fold 8.7 3rd basket down the prongs . Use the 3rd basket to wash large items of cutlery that are lightly soiled as well as small items of tableware, e.g. small cups, bowls or cooking spoons. -
Page 26: Extra Clean Zone
en Features Pull the tab on the Extra Clean 8.8 Extra Clean Zone Zone up and forwards . Use the Extra Clean Zone in the top basket to clean soiled tableware thor- oughly, e.g. muesli bowls. Set the slider to ON. Clean under running water. -
Page 27: Before Using For The First Time
Before using for the first time en Add detergent → Page 31. Before using for the first time 9 Before using for the Start the Programme with the first time highest cleaning temperature without tableware. Before using for the first time To remove any marks from water 9.1 Performing the initial con- or other residues, we recommend figuration... -
Page 28: Setting The Water Softening System
en Water softening system Water hardness Hardness range mmol/l Setting value °E 39 - 62 Hard 5.5 - 8.9 H:07 Note: Set the water hardness determ- hardness. The higher the water hard- ined on your appliance. ness, the greater the consumption of special salt. -
Page 29: Switching Off The Water Softening System
Water softening system en Place the lid back on the dis- 10.5 Regeneration of the wa- penser and turn to close. ter softening system 10.4 Switching off the water In order to obtain fault-free function of the water softening system, the appli- softening system ance performs regeneration of the If you find the special salt refill indic- water softening system at regular in-... -
Page 30: Rinse Aid System
en Rinse aid system Close the lid of the dispenser for Rinse aid system 11 Rinse aid system rinse aid. a The lid clicks into position. Rinse aid system 11.1 Rinse aid 11.2 Setting the amount of For optimum drying results, use rinse rinse aid aid. -
Page 31: Detergent
Detergent en a The display shows H:xx. Powder detergent a The display shows . Powder detergent is recommended Press repeatedly until for shorter programmes. the display shows the value r:05 The dosage can be adjusted to the set at the factory. level of soiling. -
Page 32: Unsuitable Detergents
en Detergent According to the manufacturers, ness, usually 26 °E, without combined detergents generally only adding special salt. For the best function up to a water hardness of washing and drying results we re- 26 °E. With a water hardness above commend using special salt from a 26 °E you will need to add special water hardness of 17 °E. - Page 33 Tableware en Add the detergent to the dry deter- Close the lid of the detergent dis- gent dispenser. penser. 50 ml 25 ml 15 ml If you are using tablets, one is a The lid clicks into position. enough. Insert the tablets in a hori- a The detergent dispenser will open zontal position.
-
Page 34: Tableware
en Tableware 13.1 Damage to glass and Cause Recommenda- tion tableware Highly caustic al- If you are using Only put glasses and china in the kaline or highly highly caustic al- dishwasher if it is marked as dish- acidic cleaning kaline or highly washer-safe by the manufacturer. - Page 35 Tableware en allowing steam to escape and water To save resources, do not pre- to leak out around the door. This rinse tableware under running wa- could damage your kitchen units. ter. Observe the following when arran- ging tableware: – Put heavily soiled tableware in the bottom basket, e.g.
-
Page 36: Removing Tableware
en Basic operation 13.3 Removing tableware 14.2 Setting a programme To adjust the washing programme to WARNING the soiling level of the tableware, se- Risk of injury! lect a suitable programme. Hot tableware can cause burns to the skin. When hot, tableware is sensitive Press the right programme button. -
Page 37: Starting The Programme
Basic operation en 14.5 Starting the programme 14.7 Terminate programme Press To end a programme early or to ▶ switch from a programme that has a The programme has ended when already started, you will need to can- the display shows "00h:00m". cel it first. Notes Open the appliance door. -
Page 38: Basic Settings
en Basic settings Basic settings 15 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 15.1 Overview of the basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H:04... - Page 39 Basic settings en Basic setting Display text Selection Description EmotionLight EL:02 EL:00 - EL:02 Interior light. ¡ With the setting "EL:00"m the interior light is switched off. ¡ With the setting "EL:01", the interior light can be activated via the ON/OFF button.
- Page 40 en Basic settings Basic setting Display text Selection Description Tone volume SL:02 SL:00 -SL:03 Adjustment of tone volume. Level "SL:00" switches the signal tone off. Button volume bL:02 bL:00 - bL:03 Set the button volume during operation. Level "bL:00" switches the button tones off.
-
Page 41: Changing Basic Settings
Home Connect en The Home Connect app guides you 15.2 Changing basic settings through the entire login process. Fol- Tip: Connect your appliance to a mo- low the instructions in the Home Con- bile device. You can conveniently nect app to configure the settings. change all settings via the Tip: Please also follow the instruc- Home Connect app. -
Page 42: Remote Start
en Cleaning and servicing Follow the instructions in the appliance will transmit the following Home Connect app. types of data to the Home Connect server (initial registration): ¡ Unique appliance identification 16.3 Remote Start (consisting of appliance codes as You can use the Home Connect app well as the MAC address of the to start the appliance with your mo- Wi-Fi communication module in-... -
Page 43: Cleaning Products
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which... -
Page 44: Filter System
en Cleaning and servicing not have a reminder function, we re- a Machine Care is run. commend performing Machine Care a Once the programme has ended, every 2 months. the indicator for Machine Care goes out. Running Machine Care 17.5 Filter system Notes ¡ Run the Machine Care programme The filter system removes coarse without any tableware in the dish- soiling from the dishwashing cycle. -
Page 45: Cleaning Spray Arms
Cleaning and servicing en Turn the coarse filter anticlockwise Carefully clean the rim of dirt and remove the filter system . between the coarse and the fine fil- ter. Check that no foreign objects ‒ Re-assemble the filter system. fall into the sump. Make sure that the locking catches on the coarse filter click into posi- tion. - Page 46 en Cleaning and servicing Pull up the lower spray arm to re- move. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. a The spray arm clicks into position. Insert the upper spray arm and screw it firmly in place.
-
Page 47: Troubleshooting
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code in the table of contents and on our website www.bosch-home.com. WARNING Risk of electric shock! Incorrect repairs are dangerous. - Page 48 en Troubleshooting Fault Cause and troubleshooting E:32-00 will light up Water tap is jammed or furred up. alternately or indicator Turn on the water tap. ▶ for water supply lights The flow rate must be at least 10 l/min when the water supply is open.
- Page 49 Troubleshooting en Fault Cause and troubleshooting E:61-03 will light up Not an appliance fault. Siphon connection is still alternately. Water is closed or the wastewater hose is kinked or blocked. not drained. Check the connection to the siphon and open if ne- cessary.
- Page 50 en Troubleshooting Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. ‒ Pull out the mains plug or switch off the fuse in ‒...
- Page 51 Troubleshooting en Fault Cause and troubleshooting Remnants of food on Filters are inserted incorrectly and/or not engaged. tableware. Insert the filters properly. → "Filter system", Page 44 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme. ▶ → "Programmes", Page 19 Adjust the sensitivity of the sensors.
- Page 52 en Troubleshooting Fault Cause and troubleshooting Removable streaks Tableware has been precleaned too intensely. The are present on sensors chose a weaker programme. Stubborn soiling glasses, glassware cannot be entirely removed. with a metallic appear- Only remove large remnants of food and do not ▶...
-
Page 53: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press 18.1 Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 54: Protect Appliance From Frost
en Customer Service 19.2 Protect appliance from 19.4 Disposing of old appli- frost ance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 55: Product Number (E-Nr.), Production Number (Fd) And Consecutive Numbering (Z-Nr.)
Customer Service en Customer Service for a period of at 20.2 AQUA-STOP guarantee least 10 years from the date on In addition to warranty claims against which your appliance was placed on the seller under the purchase agree- the market within the European Eco- ment and in addition to our manufac- nomic Area. -
Page 56: Technical Specifications
en Technical specifications Technical specifications 21 Technical specifications Technical specifications Weight Max.: 60 kg Voltage 220 - 240 V, 50 Hz or 60 Hz Power rating 2000 - 2400 W Fuse 10 - 16 A Water pressure ¡ min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) Inlet rate Min. 10 l/min Water temperature Cold water. -
Page 57: Statement Of Compliance For Great Britain
Declaration of Conformity en essential requirements and other rel- A detailed Declaration of Conformity evant provisions of Directive can be found online at www.bosch- 2014/53/EU. home.co.uk among the additional A detailed RED Declaration of Con- documents on the product page for formity can be found online at your appliance. - Page 58 en Declaration of Conformity The manufacturer, BSH Hausgeräte GmbH deems that it has complied with ¡ provision 5.1-1 of ETSI EN 303 645 v2.1.1 and, where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1; ¡ provision 5.2-1 of ETSI EN 303 645 v2.1.1;...
- Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the SMV6ZDX16E and is the answer not in the manual?
Questions and answers