1. Safety Lock
Safety Lock is a system that safeguards
against unintended activation of the oven,
providing a protective measure to ensure
child safety.
1. How the safety lock works
Initiating a cooking process triggers the
door lock, and it also engages if the
door remains unlocked for additional 30
minutes following the completion of the
cooking.
Safety Lock is active by default. It will
only be deactivated if the user chooses
to do so manually. Even in the event of
a power disconnection, the oven will
preserve the state of the safety lock,
whether it is activated or deactivated.
2. Unlock the door
Press
during operation and open
Unlock
the door within 10 seconds, or the
safety lock will re-engage. The door will
stay unlocked until cooking is initiated.
Or:
Press
within 30 minutes after
Unlock
cooking is complete to manually disable
the door lock and switch to standby
mode. If no key is pressed, the safety
lock will automatically disengage after
30 minutes.
3. Deactivate the safety lock
If there are no children in the house,
you can choose to permanently
deactivate the safety lock function.
Press
,
order and then press and hold
three seconds within 30 seconds, the
screen will display "ULoc", indicating
the successful deactivation of the
safety lock.
OPERATION
in consecutive
for
Unlock
EN-14
Unlock
ULoc
4. Re-activate the safety lock
Press
,
order and then press and hold
three seconds within 30 seconds, the
screen will display "Loc", indicating the
successful re-activation of the safety
lock.
2. Setting the Clock
1. In standby mode, press
then "0:00" will display.
2. Turn the knob to set the hour figures.
3. Press
to confirm.
Unlock
4. Turn the knob to set the minute figures.
5. Press
to confirm. The clock is
Unlock
set.
Notes:
(1) To reset the clock, please repeat step
1 to step 5.
(2) The clock is a 12-hour display. If the
clock is not set, it will not work when
powered.
Once
Once
Press and
hold 3s
The screen
displays
in consecutive
for
Unlock
twice and
Unlock
Need help?
Do you have a question about the MC77CMB and is the answer not in the manual?