Page 2
Contents Technical Specs Parts Description Helpful Tools and In the Box Installation Maintenance Warranty and Contact Important Notes • Please read fully and carefully before installing. Subject to change without notice. • The Hot+Cold Hydrant should be installed by a qualified professional. Follow all applicable regulations and building codes.
HELPFUL TOOLS AND IN THE BOX ASSE 1019C, ASME A112.18.1, CSA B125.1 CERTIFIED Helpful Tools 4 mm 3 - 1/2” In the Box HC1-006 x2 M5 x .8 mm x4 #10 HC1-006-EL Remove inlets before installation Removal optional Mounting Template 6 in x 6 in www.aquorwatersystems.com...
Aquor Hot+Cold Hydrant ® INSTALLATION ASSE 1019C, ASME A112.18.1, CSA B125.1 CERTIFIED Find vertically level install surface and turn off water 3 - 1/2” Install rear inlet within a heated Entry hole is off-center vertically, use space to ensure freeze protection included template to find correct position.
Page 7
Aquor Hot+Cold Hydrant ® INSTALLATION ASSE 1019C, ASME A112.18.1, CSA B125.1 CERTIFIED If needed, reattach elbow inlets, then connect to plumbing, follow manufacturer's instructions 4 mm Test function Check for leaks www.aquorwatersystems.com (800) 458-1749...
The hydrant make it right. requires no scheduled maintenance to provide a Aquor o ers a limited lifetime warranty on all long operational life. If a problem does arise, all the stainless steel products and parts and 5 years serviceable components are o ered in repair kits.
Page 9
Aquor ® Hot+Cold Hydrant 04/24 Mounting Template This Side Up 3 - 1/2 in 6 in x 6 in Still have questions? We’re here to help Monday to Friday 9AM-4PM PST. Email us at contact@aquorwatersystems.com or give us a call at (800) 458-1749.
Need help?
Do you have a question about the HC1-006 and is the answer not in the manual?
Questions and answers