Quick Start Guide; Placing Speakers; Connecting A Video Monitor; Connecting Other Components - Yamaha RX-V765 Owner's Manual

Quick start guide
When you use this product for the first time, perform the steps below. See the related pages for details of operations and
settings.
Step 1: Prepare items for setup
Step 2: Set up your speakers
Place your speakers in the room and connect them to this
unit.
Prepare speakers, DVD player, cables, and other items
necessary for setup.
For example, prepare the following items for setting up a
7. I-channel sound system.
Front right speaker
• Placing speakers
• Connecting speakers
I&P.IO
I&P. II
Requirements qty.
Speakers Front speaker
2
Center speaker
Surround speaker
2
Surround back speaker 2
• Connecting a SiriusConnect tuner I&P. 37
I&P.18
I&p' 18
• Connecting a video monitor
• Connecting other components
• Connecting a multi-format player or an
external decoder
• Connecting an external amplifier
• Connecting a Yamaha iPod universal
dock or Bluetooth wireless audio receiver I&P. 19
• Connecting the FM and AM antennas I&P. 20
• Connecting an XM Mini-Tuner Home
Dock I&p' 33
Step 3: Connect your components
Connect your TV, DVD player, or other components.
,0,
~<il~
• This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer)
that automatically optimizes this unit based on room acoustic
characteristics (audio characteristics of the speakers, speaker positions,
and room acoustics, etc.).
You can enjoy good balanced sound without special knowledge by using
the YPAO technology (see page 21).
Surround right speaker
! S"~~k
right
speaker
Surround back left
speaker
Surround left speaker
Video monitor
Components
(such as DVD player)
Front left speaker
\
Active subwoofer
Step 4: Turn on the power
Speaker cable 5
Connect the power cable and turn on this unit.
Subwoofer cable
Reproduction component such as OVO player
• Connecting the power cable
• Turning this unit on and off
Ir$'P.
20
I&p' 20
Video monitor such as TV
Video cable or HOMI cable
Audio cable
2
2
Step 5: Select the input source and start
playback
Select the component connected in the step 3 as an input
source and start playback.
,I,
~<il~
• This unit supports the SCENE function that changes the input source and
sound field program at one time. Four SCENES are preset for different
purposes for Blu-ray disc, DVD and CD. You can select a SCENE from
those just by pressing a remote control key. See page 24 for details.
,0,
~<il~
• Prepare at least two (front) speakers. Speakers other than front speakers
may be used in the following order of preference:
I Two surround speakers
2 One center speaker
:>
One or two surround back speakers
• If your video monitor is a CRT, we recommend that you use magnetically
shielded speakers.
• An audio cable is not required when you use an HDMI cable.
• Basic procedure
• Selecting sound field programs
I&P,24
I&P. 27
8
En