Use of audio components can impair your ability to hear necessary traffic sounds and may constitute a safety hazard while driving your automobile. Rainbow accepts no liability for hearing loss, bodily injury or property damage as a result of use or misuse of this product.
Page 4
Installation Notice Do not use your automobile until all components of the loudspeaker system have been secured to the interior framework. Failure to do so may turn a component into a dangerous, flying projectile during a sudden stop or accident. We recommend disconnecting the battery before beginning installation of the loudspeaker system.
Warranty All rainbow products come with a year's warranty on all parts, starting from the date of purchase from the authorized retailer. Only the first buyer is entitled to this warranty policy, which would be invalid in case of products being transferred.
TECHNICAL DATA TSL/MD3/100FS.E Tweeter Subwoofer Size 1 inch 10 inch RMS power 10 W 80 + 80 W Peak power 20 W 160 + 160 W Impedance 4 Ohm 2 + 2 Ohm Frequency response 1kHz - 20kHz 33Hz - 600Hz...
Page 7
TECHNICAL DATA 10 inch non-pressed paper 1 inch aluminum Tweeter grill cover (L/R) cone subwoofer with dome tweeter (L/R) ABS+fiber enclosure ×1 ×2 ×2 DSP amplifier L2.1 DSP amplifier rack Plug and play cable kit ×1 Screws kit...
Need help?
Do you have a question about the TSL/MD3/100FS.E and is the answer not in the manual?
Questions and answers