Mod 88632 Instruction Manual

Pergola

Hide thumbs

page of 22

/ 22
Bookmarks

Quick Links

Download this manual

MOD Pergola

Need help?

Do you have a question about the 88632 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mod 88632

Page 1 MOD Pergola...
Page 2 Thank you: We’re thrilled that you have chosen the MOD™ Pergola to transform your outdoor living area and we would first like to offer our heartfelt thanks for being apart of our growing community. With your purchase of the MOD™ Pergola, you’ve taken...
Page 3 Before you begin... LOCATION, LOCATION, LOCATION! WARNINGS: • Selecting a flat level location for your MOD™ Some sections of assembly will require Pergola(s) is essential. lifting parts overhead. Lifting these parts can • If required, clear and level the space for be heavy and awkward to secure into place where your MOD™...
Page 4 MOD’s™ standard rate and terms then in responsibility. effect. This warranty gives you specific legal...
Page 5: Item Description
Parts List ITEM DESCRIPTION PART Pole Crossbeam Crossbeam Crossbeam Brace Clip Mount Foot Loop Canopy M6x15 Bolt Hex Key Stake...
Page 6 A. Insert one M6x15 Bolt (X) through each eyelet on each part A and into the bolt-threading found on each part J. Use Hex Key (Y) to tighten the bolts down. Model No. 88632 - 2024 Modular Outdoor Design . All Rights Reserved.
Page 7 Insert one M6x15 Bolt (X) through the eyelet in the center of Clip (H) and into the bolt-threading insert in the center of Crossbeam (C). Use Hex Key (Y) to tighten the bolt down. Model No. 88632 - 2024 Modular Outdoor Design . All Rights Reserved.
Page 9 C to a second part A. You should now have an assembled rectangular frame, with Clip (H) on Crossbeam (C) and the magnets in the center of Crossbeam (B) facing inward. Model No. 88632 - 2024 Modular Outdoor Design . All Rights Reserved.
Page 11 G and into the bolt-threading inserts found on top of parts B and D. Follow these steps to connect a second part G to where parts B and D meet at the adjacent part A. Model No. 88632 - 2024 Modular Outdoor Design . All Rights Reserved.
Page 13 Mount (I) secured to Crossbeam (C) with the remaining loose Mount (I) to Crossbeam (B). Tighten all bolts left loose since Step 3 of assembly using Hex Key (Y). Model No. 88632 - 2024 Modular Outdoor Design . All Rights Reserved.
Page 15 Unzip the five zippers at the ends of the sewn-on sleeves of Canopy (L). Insert one Rod (F) through each opened zipper and across the length of each sewn-on sleeve. Zip up each zipper when finished. Model No. 88632 - 2024 Modular Outdoor Design . All Rights Reserved.
Page 17 Assembly Instructions Before proceeding with the installation of the Canopy (L) to your MOD™ frame, let’s take a closer look at the canopy to better understand some of its features. There are three tie-down straps with fasteners along one side of the Canopy (L).
Page 18 Stakes (Z) to secure it to the ground. Two eyelets are at the base of each Pole (A), intended for these stakes. Using a rubber hammer (not included) would work best for securing these stakes and your MOD™ Pergola in place.
Page 20 Other Designs 181.1 in (4.6 m) 271.6 in (6.9 m) 181.1 in (4.6 m) Dual Connector (item# 88639) 181.1 in (4.6 m) Corner Connector (item# 88640) Model No. 88632 - 2024 Modular Outdoor Design . All Rights Reserved.
Page 21 Thanks to the versatility of MOD™ Pergolas, the configuration options are limitless. You can create a long continuous shade or a covered space under four connected pergolas for gatherings. With the retractable canopies overhead, you can decide where and how much sun to let in.
Page 22 MOD Pergola...

Mod 88632 Instruction Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Mod 88632

Summary of Contents for Mod 88632

Page 5: Item Description