Download Print this page
Delta 25938 Series Specification Sheet
Delta 25938 Series Specification Sheet

Delta 25938 Series Specification Sheet

Delta two handle lavatory centerset faucet specification sheet

Advertisement

Quick Links

Advertisement

loading

Summary of Contents for Delta 25938 Series

  • Page 2 Position faucet (1) and gasket (2) on sink. Hand tighten nuts (3). Option: If sink is uneven, use silicone under the gasket. Coloque la llave (1) y el empaque (2) en el lavamanos. Apriete a mano las tuercas (3). Opción: Si el lavamanos está desnivelado, utilice silicón debajo del empaque.
  • Page 3 Pop-Up Installation Remove flange (1) and rubber washer (2) from pop-up body. Add Teflon tape (1) to the drain body (2). Insert ® threaded end of drain body up through drain hole and attach flange (3) to body with pivot (4) pointing to rear of sink.
  • Page 4 Remove aerator (1) using supplied wrench (2) and turn faucet handles (3) all the way on. Turn on hot and cold water supplies (4) and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Reinstall aerator with wrench.
  • Page 5 RP51345 Aerator & Wrench Aireador y Llave Aérateur et Clé RP6183 Locknuts Contratuercas Ècrous de Blocage H238▲ RP25620 Set Screw RP41896 Tornillo de Ajuste Vis de Calage Glide Ring Aro para Deslizar L’anneau de Glissement 51759 Rev. A RP51344▲ Lift Rod Finial Pomo de la barra de alzar Grain de la Tirette RP40267▲...
  • Page 6: Cleaning And Care

    Delta Faucet Company recommends using a professional plumber for all installation & repair. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement parts may be obtained by calling 1-800-345-DELTA (in the U.S.