Page 2
Assemble the lighting part A to under the top of the model...
Page 3
Before assembling lighting part B, remove the shown clear blue parts from the model Start from the end side of the lighting parts, place the two led bulbs at the end in between the studs as shown, then restore the clear blue tiles...
Page 4
Place the next led bulb right on the blue stud then restore the clear blue slope on it Place the next two led bulbs in between the studs as shown...
Page 5
Restore the clear blue tiles then place the next led bulb in between the next studs and the second next one right on the clear blue block Restore the parts for the previous part and place the next led bulb...
Page 6
Restore the clear blue tile, place the last led bulb on the clear blue block and restore the dash Then hide the wire at the corner and move the connector out of the box...
Page 7
At last put the cover back and connect both plugs to the USB cable...
Need help?
Do you have a question about the MINECRAFT 21265 and is the answer not in the manual?
Questions and answers