VPG 1410 Owner's Manual

Model 1410
Tedea-Huntleigh
Load Cell for Rotary Filling Machines
Load Cell for Rotary Filling Machines
Load Cell for Rotary Filling Machines
FEATURES
• The irst and only load cell speciically designed for use
in rotary illing machines
• Short settling times
• High resistance to side loads
• Effective isolation of base vibrations
• Centrifugal forces do not affect accuracy
• Two mounting options
• Optional:
- FM approval available
APPLICATIONS
• Rotary illing machines
DESCRIPTION
The Model 1410 represents a radical new concept in
load cell design, which alleviates many of the problems
encountered when conventional load cells are used in
rotary weighing machines.
Due to a patented damping system, typical settling times
of 700 ms are dramatically reduced to less than 300 ms
(depending upon conditions), signiicantly reducing cycle
times and increasing throughput capabilities.
Centrifugal forces are handled in such away that their
effect on output is very small. For example, when tested
up to 20 rpm, the total dynamic error amounted to less
than 0.2 gram per kg. Also, the Model 1410 provides
OUTLINE DIMENSIONS in millimeters
www.vpgforcesensors.com
272
The document and the products described herein are subject to change from time to time without notice and are also subject to speciic disclaimers. Please visit
Technical contact: vpgfs.americas@vpgsensors.com,
vpgfs.asia@vpgsensors.com, vpgfs.emea@vpgsensors.com
excellent isolation of base vibrations. Both features
enable the use of higher machine speeds without losing
accuracy.
The uniquely rugged construction of the Model 1410 is
very resistant to side loads and can therefore withstand
bottle jams and other mishaps.
Document No.: 12023
Revision: April-2024
https://vpgsensors.com/disclaimer for more information.