GS-Mini Starlink Vehicle Kit Installation Guide
1. Introduction
1.1 Purpose of the Guide
This guide provides step-by-step instructions for installing the GS-Mini Vehicle Kit in a
plug-and-play format. It is designed to ensure a reliable installation with all components
pre-terminated except for the final connection of the 4-Pin Deutsch plug and correct
mounting of the switch module.
1.2 Safety Warnings & Precautions
● Park the vehicle on a level surface.
● Follow proper wiring and installation practices.
● Use only the GlobalSat approved bracket system supplied for mounting.
● Install according to the mounting location provided by GlobalSat
2. Unboxing & Pre-Installation
2.1 Contents of the Kit
Upon opening the GS-Mini Vehicle Kit, verify the following components are included:
● GS-Mini CORE Mount (with or without Starlink Mini fitted)
● Vehicle Specific Mounting Bracket
● 12/24V 6mm Red + Black Battery Power Loom (with fuse holder)
● 12/24V 4mm Red/White + Black Starlink Loom (with 2-pin Deutsch plug)
● Switch Module & Dash Switch (round push-button style)
● 4-Pin Male Deutsch Plug Termination Kit
● Kit Applicable Accessories (Fasteners, Saddles, etc)
● User Welcome Pack (for the driver/operator)
2.2 Installing the Starlink into the GS-Mini CORE Mount
● If you have purchased a GS-Mini Vehicle Kit without a Starlink Mini
fitted to the CORE mount, you'll need to complete this task yourself.
● Simply scan the QR Code and follow the instructions outlined in the video
● You can also access the video
2.3 Placing the User Welcome Pack
● Place the User Welcome Pack on the passenger seat of the vehicle. This pack is
for the driver/operator and includes system information, user guides, and quick-start
instructions.
www.globalsat.com.au
HERE.
GlobalSat Pty Ltd | ABN: 12 067 562 314
Need help?
Do you have a question about the GS-Mini and is the answer not in the manual?
Questions and answers