Advertisement
Network Video Recorder
Quick Installation Guide
DS-8200-RM UHD Series
DS-8208-RM UHD/DS-8212-RM UHD/DS-8216-RM UHD/
DS-8220-RM UHD /DS-8224-RM UHD/DS-8228-RM UHD/
DS-8232-RM UHD/DS-8236-RM UHD/DS-8240-RM UHD/
DS-8248-RM UHD/DS-8256-RM UHD/ DS-8264-RM UHD
Quality Service Group
2.0.0.3
Information in this document is subject to change without notice.
© Copyright 2023, DIGIEVER Corporation. All rights reserved.
1
Advertisement
Table of Contents
Related Manuals for Digiever DS-8208-RM UHD
Summary of Contents for Digiever DS-8208-RM UHD
- Page 1 DS-8208-RM UHD/DS-8212-RM UHD/DS-8216-RM UHD/ DS-8220-RM UHD /DS-8224-RM UHD/DS-8228-RM UHD/ DS-8232-RM UHD/DS-8236-RM UHD/DS-8240-RM UHD/ DS-8248-RM UHD/DS-8256-RM UHD/ DS-8264-RM UHD Quality Service Group 2.0.0.3 Information in this document is subject to change without notice. © Copyright 2023, DIGIEVER Corporation. All rights reserved.
-
Page 2: Pre-Installation Notice
Quick Installation Guide Thank you for choosing DIGIEVER Network Video Recorder. The following quick guide will lead you to complete the installation and configuration of the NVR. Please read the following description carefully. Pre-installation Notice The following safety precautions will increase the life of the NVR. Follow all precautions and instructions. -
Page 3: Remote Pc System Requirements
Pre-installation Notice Please make sure the following items are prepared for installing DIGIEVER NVR DS-8200-RM UHD Series. Network connection Configuration of network cameras Compatibility of network cameras Computer for configuring DIGIEVER NVR 1-8 hard disks ... - Page 4 the full benefits of the software. Make sure the display DPI setting is set to default at 96DPI To set DPI value, right-click on desktop, choose “Settings” tab >> “Advanced” >> “General.” CD-ROM Drive It is necessary to read the operating instructions in the provided CD- ROM.
-
Page 5: Package Contents
Package Contents NVR Network Video Recorder Power Cord Ethernet Cable Screw Bag Product CD... -
Page 6: Hardware Description
Hardware Description Front View Rear View HDD LED indicator Network LED indicator: LAN 1, LAN 2 Power LED indicator One-touch backup button with LED indicator 2 x USB3.2 Gen 1x1(Front) 6~13. HDD 1 to HDD 8 Reset button DI/DO (4 x in, 4 x out) Max24V, DI_GND, DI-4, DI-3, DI-2, DI-1, OCOM, DO4, DO3, DO2, DO1 2 x 2.5 Gigabit Lan ports 4 x USB 3.2 Gen 1x1 (Rear) -
Page 7: Hard Disk Installation
Hard Disk Installation Please follow the steps as illustrated below to install the hardware: Take out the disk tray from NVR. Connect the Ethernet cable to the port of 2.5 Gigabit LAN. Install the hard disk in each tray ... - Page 8 Connection to DIGIEVER NVR Please insert the product CD-ROM on a PC to install EZ Search and S-NVR Decoder. Finally, you can start Quick Configuration on a web page. Install EZ Search for finding NVR in the network.
- Page 9 Connect to NVR 1. Connect to DIGIEVER NVR After setting the EZ Search and S-NVR Decoder, the user can connect to the monitoring page by the following two options: EZ Search Once you click “Connect” or double click the selected NVR list, the IE browser will pop up automatically.
- Page 10 IP address or change it in this page. However, it’s recommended setting different IP address of DIGIEVER NVR if there is more than one DIGIEVER NVR in the same LAN. 2. Enter a user name and password Log in the NVR with the default administer account (user name: admin, password: admin).
-
Page 11: Quick Configuration
Once the five steps of Quick Configuration are complete, you can click “Start Liveview” to start monitoring. For further details of Quick Configuration, please refer to the user manual. When the live view is displayed, you have successfully installed the DIGIEVER NVR. Congratulations!
Need help?
Do you have a question about the DS-8208-RM UHD and is the answer not in the manual?
Questions and answers