1. Manuals
  2. Brands
  3. Koala Kare Manuals
  4. Baby & Toddler Furniture
  5. KB311-SSWM
  6. Installation & operation instructions

Koala Kare KB311-SSWM Installation & Operation Instructions

Surface-mounted baby changing station
Hide thumbs Also See for KB311-SSWM:
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

Koala Kare Products
Installation & Operations Instructions
KB311-SSWM
Surface-Mounted
Baby Changing Station
Important. Retain for future reference. Read carefully.
Importante. Guárdelo para futuras consultas. Leer atentamente.
Important. À conserver pour information. À lire attentivement.
Wichtig. Zur späteren bezugnahme aufbewahren. Bitte sorgfältig durchlesen.
The KB311 Baby Changing Stations have been designed to meet the following applicable provisions of the
2010 ADA Standards (ADAS) and the 2009/2017 American National Standards Institute A117.1 Standards
(ANSI 2009/2017) when properly installed and maintained. To comply with these accessibility requirements
the unit must be installed in a compliant location and height in accordance with the installation instructions.
You are responsible for the safe operation of this unit.
Cambiador Plegable
Table à Langer
Babywickelstation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KB311-SSWM and is the answer not in the manual?

Questions and answers

Related Manuals for Koala Kare KB311-SSWM

Summary of Contents for Koala Kare KB311-SSWM

  • Page 1 Koala Kare Products Installation & Operations Instructions KB311-SSWM Cambiador Plegable Table à Langer Surface-Mounted Babywickelstation Baby Changing Station Important. Retain for future reference. Read carefully. Importante. Guárdelo para futuras consultas. Leer atentamente. Important. À conserver pour information. À lire attentivement.

  • Page 3: Inspection Criteria

    To assure proper installation, it is suggested that a qualified person or carpenter install the Koala WARNING: Avoid serious injury from falling or Baby Changing Station. Koala Kare Products will sliding out. Always use restraint system. not be responsible if the station is not installed properly.

  • Page 4: Installation Instructions

    KB311-SSWM Installation Instructions Tools Needed Safety Gloves Drill Pencil Wall Stud Finder Measuring Tape Level Phillips Head 1/8" (3mm) 7/32" (6mm) Screwdriver (regular & masonry) (regular & masonry) drill bits drill bits Hardware Provided 1/4" x 3" 8-32" x 5/16"...
  • Page 5 KB311-SSWM Installation Instructions Step 1: Fig. 1 Fig. 2 • Be sure to wear safety gloves to protect your hands from the products exposed metal edge. • Remove the handle and bag hook from the packaging and set to one side.
  • Page 6 KB311-SSWM Installation Instructions Step 5: • Open the main unit by pulling up on the frame and remove the plastic liner dispenser. Set it to one side. Fig. 5 • Lift the unit into the flange locating the key holed Fig.
  • Page 7 KB311-SSWM Installation Instructions Step 8: • Take the provided handle and position it over the handle mounting studs. • Use provided Allen wrench to tighten the set screws in the handle, securing it to the handle mounting studs. Fig. 9 Step 9: •...
  • Page 9 Koala Kare Products 6982 South Quentin Street, Centennial, CO 80112-3945 Main: 303.539.8300 | Toll Free: 888.733.3456 | Fax: 303.539.8399 A Division of Bobrick Website: koalabear.com | Email: customerservice@koalabear.com ©2020 Koala Kare Products, Form No. ###. December 2020...

Table of Contents