Page 1
Koala Kare Products Installation & Operations Instructions KB300-SS Cambiador Plegable Table à Langer Surface-Mounted Babywickelstation Baby Changing Station Important. Retain for future reference. Read carefully. Importante. Guárdelo para futuras consultas. Leer atentamente. Important. À conserver pour de futurs besoins de reference. À lire attentivement.
To assure proper installation, it is suggested that inappropriate smells. a qualified person or carpenter install the Koala Baby Changing Station. Koala Kare Products will ASTM F2285-04 (2016) not be responsible if the station is not installed properly. Koala Baby Changing Stations have been tested to hold a substantial static load.
Page 4
Step 1: • Inspect contents and remove changing station from the shipping container and check for any freight damage. If damage is found, please call Koala Kare Products’ Customer Service • Identify the best location for installing the unit. Step 2: Fig.
Page 5
KB300-SS Installation Instructions Step 3: 1/4" • Mount bed and chassis by screwing two of the mounting Fig. 3 (6.4mm) screws into the pilot holes leaving 1/4" (6.4mm) exposed to allow keyhole slots to be easily mounted over the screw heads. Fig. 3 •...
Page 6
KB300-SS Installation Instructions Step 6: Fig. 7 • To install the bag hook, measure up 44" (1118mm) from finished floor in the desired location and mark the wall. • Position the bag hook on the wall so that the top of the mounting plate is level with the 44"...