Installation & Connection
How to install
01 Unpack the GIFT BOX.
Screw
Helf Sleeve
02 Detach the unit from the Half Sleeve.
03 Remove the safety screw for
Transporting which is on the top of
the unit.
Remove the protection unit
*
(support panel).
(Sticker : "You must remove it before
you install" )
Screw : P/H M5.0mm X 8.0mm 8ea
04 Screw a not provided to the right and left
side of the set.
Bord
Bracket Screw
05 Screw the Dash board.
06 Install the set and then install the
Trim Plate (option).
02
105