ViewSonic ViewPanel VG175 User Manual page 10

To adjust the screen image:
To display the Main Menu as shown below, press button [1].
1
To highlight a control you want to adjust, press the up
2
on the display's front control panel to scroll up or down the Main Menu: for
example, Contrast.
To select the highlighted control, for example, Contrast, press button [2]. A
3
control screen for the selected control appears as shown below.
To adjust the selected control, press the up
4
To save the adjustments and exit the menu, press button [1].
5
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal of 1280
x 1024 @ 60Hz to the VG175. (Look for instructions on changing the refresh
rate in your graphic card's user guide.) Then, use Auto Sync to size and
center the screen image.
• If necessary, make small adjustments using the Fine Tune control.
• Adjust the Smoothing control so that the screen image looks focused, crisp,
and sharp when using a resolution other than 1280 x 1024.
L
or down
L M
or down button.
ViewSonic VG175
M
button
9
E
N
G
L
I
S
H