Disconnecting The Mp870 In Windows; 7, Vista, Xp And 2000 - Transcend MP870 8GB User Manual

USB Charge & Playback: For charging the battery while continuing to use the music
playback functions of the player. No data transfer is possible in this mode.
Note: Both connection modes will charge the internal battery, however when "USB Data Transfer"
is chosen, the player's audio and video functions will not be available.
3. Use the /
If you are using Windows®, Two "Removable Disk" drives (one for the microSD slot & one for the
MP870 internal memory) with a newly assigned drive letter will appear in the My Computer window.
*Note: (F:) and (G:) are example drive letters – your "My Computer" window may differ
4. To transfer photos, videos, e-book text files, and non-protected music to the MP870, the USB
Connection Type in the Settings menu must be set to "USB." With this connection type, you can transfer
files by simply dragging them onto the MP870's Removable Disk drive letter. You can also create your
own folders within the MP870 and copy files directly to the folders.
5. Always disconnect the MP870 from a computer by selecting and following the instructions for the "Safely
Remove Hardware" icon that can be found on the Windows
screen
NEVER unplug the MP870 during file transfer. Unplug the MP870 only when Windows informs
it is safe to do so.

Disconnecting the MP870 in Windows

1. Select the Hardware icon
2. The Safely Remove Hardware pop-up window will appear. Select it to continue.
3. A window will appear stating "The 'USB Mass Storage Device' device can now be safely removed from
the system."
buttons to select your desired connection mode.
   

7, Vista, XP and 2000

on the system tray.
®
Toolbar at the bottom of the computer
68