About Camera------------------------------------------- 01 Power for the Camera -------------------------------- 02 How to Insert the 4G Card--------------------------- 04 Add Camera by Scanning QR Code ---------------- 05 How to Use Dual Lens--------------------------------- 07 Two Ways to Share the Camera-------------------- 09 Alarm Se�ng and Recording------------------------ 11 Night Vision Se�ng------------------------------------ 15 View on PC Client So�ware----------------------------- 16 Solar Panel Installa�on----------------------------------- 20...
1.1 Product should contain: 4G Ba�ery Camera *1 Solar panel * 1 Screw Bag *2 Extension cord * 1 User manual * 1 Screwdriver * 1 Posi�oning s�ckers *1 Moun�ng bracket for solar panel * 1 4G SIM Card * 1 (The card has been inserted into the card slot) 1.2 Card slot display: ①...
Note: * Please hold on the reset bu�on for about 10 seconds un�l you hear sound from the camera, it means reset successfully. A�er reset the bu�on, all se�ngs will return to the default se�ng. * When the camera is charging, the indicator will turn on in red.
Page 6
2.2 Fully Power Camera Note: * The product is subject to the actual product * Please use the camera a�er fully charging with a 5V 1A or 5V 2A power adapter. The camera only supports charging with 5V power adapter. * A�er turning on the camera, please close the silicone cover �ghtly, connect the solar panel/charger with camera through the reserved holes in the silicone cover, to ensure effec�ve...
3. How to Insert the 4G Card 3.1 lf you use the pre installed 4G card, you can directly add the camera and use it without inser�ng it again. 3.2 lf you use your purchased 4G card, please insert it in the following direc�on. Note: Please turn the yellow core of the 4G card towards the green control board and press it into the card slot to secure the 4G...
Android V3.1.14 or IOS V4.2.23 or newer, otherwise you can’t use old version add the 4G camera successfully. If there is no available latest version Camhipro app, please contact SV3C customer support info-us@sv3c.com, we will send you file.
Page 9
4.2 Add Camera Before adding the camera, please turn on the camera (See "2.1 Power on Camera"), the camera will connect to network automa�cally. If succeed, the indicator light will flash blue, there will be prompt sound. 2. Click “4G camera” 1.Click “...
Note: Camhipro App will ask you to update the default password, please set a new password for your camera and remember the new password! 4.3 View Camera Pan up/ down/ le�/ right bu�on,Only available for PTZ cam using! 5. How to Use Dual Lens 5.1 Click the icon to enter full screen image...
Page 11
5.2 A�er you entered the full screen live view page, click the Up and Down Arrow icon to switch the lens. Dome camera Lens image Bullet camera Lens image Lens switch...
6. Two Ways to Share the Camera 6.1 Click “Add a sharing device" to scan camera's QR code, then you can add the camera on a different device. Click here to get the camera’s QR code Click setting button after connected the Click “A dd a sharing camera successfully device ”...
Page 13
5. Custom camera’s name Click the blank area to view online video 4. Input camera’s UID number and password, 6. Click “Confirm” click “Add to” Note: The camera's UID number format is like "UUUU-123456-ABCDE ", and the default user name and password are both "admin".
7. Alarm Se�ng and Recording 7.1 SD Card se�ng Click “format SD card" before the first recording Note: * Please use SD-micro Class-10, UHS-1 or higher high speed memory card, support max 128GB Micro SD card. * Must format Micro SD card before recording.
Page 15
7.2 Alarm Se�ng Turn on “PIR alarm” Note: * Turn on “PIR alarm”, the camera will detect all movement; If you need the camera detect humanoid moving only, please turn off “PIR alarm” and turn on “Humanoid alarm”; * If you need the camera to mark the moving objects, please turn on “Humanoid recogni�on”.
Page 16
7.3 Alarm Recording Se�ng Turn on “Alarm recording to SD card” and setup the recording clip dura�on in 10s or 30s, the camera will start to record for alarms automa�cally. Turn on Note: * The ba�ery camera only supports alarm recording when it is powered by ba�ery or solar panel! Con�nuous recording will drain the ba�ery too quickly! * If you need the camera record for all day, please keep the...
Page 17
7.4 All Day Recording If you need the camera to record for all day, please keep the camera connected with power adapter and go to “Low power se�ngs and recording”, enable “kept working” and turn on “Whether to enable recording” to set the con�nuous recording dura�on. Note: 7.5 Playback Record...
7.6 Set Camera Time Zone Note: When your �me is DST(daylight saving �me), please turn on DST bu�on, otherwise the recording �me will be incorrect. 8. Night Vision Se�ng Go to “Picture se�ng” to turn on/off Infrared light and Floodlight manually.
Note: * The ba�ery camera doesn’t support “Intelligent night vision mode”, the floodlight won’t turn on when camera detects moving objects, the floodlight only can be turned on manually! 9. View on PC Client So�ware 9.1 So�ware Login If you need to view the camera on PC, we recommend you to use the HiP2P PC Client so�ware...
Page 20
Open HlP2P Client, click any one of the icons such as“ ”then below Interface pop up, please click “OK" to log in(Password is empty). 9.2 Add the camera on HiP2P PC Client so�ware use Click "Input UID" Click Here PS: Please find the UID on the APP(UID like this ZZZZ- 123456-ABCDE) 3.Enter the UID and...
Page 21
Note: Please click “OK” a�er you enter the new password. And must close the so�ware, then open it again,the new password will be updated. 9.4 Connect and manage mul�ple cameras at the same �me via P2P PC Client so�ware on windows and MAC...
Page 22
Please download the correct P2P PC Client so�ware for Windows and MAC PC on SV3C website: www.sv3c.com Any doubt about HIP2P so�ware,please contact SV3C customer support: US Email address: info-us@sv3c.com...
10. Solar Panel Installa�on 1 Find the area that gets the most direct sunlight throughout the day 2 Angle the solar panel at local la�tude + 5 degree upward 3 Point it south if in the northen hemisphere and north if in the southern hemisphere. Ideal Angle = Local La�tude + 5°...
* Please reset the camera, hold on the reset bu�on for about 10 seconds un�l you hear sound from the camera. Then turn on the camera again, to see if the camera connect internet. If above methods not working, please contact SV3C customer support.
Page 25
Q4: Does the camera support ONVIF? Can it be added to third-party so�ware such as Blue iris, ispy, VLC? A4: No, the camera doesn’t support ONVIF, can’t be added to the third-party so�ware. You can use the camera on your phone app Camhi/Camhipro and HIP2P PC Client so�ware.
Page 26
If above methods are all not working, when the camera is connected to the solar panel, it does not charge, but it is charged when connecting the adapter, please contact SV3C support.
This manual is to help customers to know and use the camera quickly, For detailed instruc�ons and video tutorials please referto SV3C website www.sv3c.com This manual may have descrip�ons and opera�ons that do not match the product, lf you have any ques- �ons or need technical support Please feel free to...
Page 28
FCC Warning: This device complies with part 15 of the FCc Rules. Opera�on is subjec�o the following two condi�ons: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired opera�on.
Need help?
Do you have a question about the HX Series and is the answer not in the manual?
Questions and answers