1. Manuals
  2. Brands
  3. Electron Manuals
  4. Lighting Equipment
  5. TERRAGON 80
  6. User & installation manual

Electron TERRAGON 80 User & Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

TERRAGON 80
User & Installation Manual
Introduction
TERRAGON series are IP67/IP68 in-ground linear luminaires offered by Electron SA for outdoor applications. They are most used for
wall washing and big surfaces illumination, but they can also cover other lighting needs.
They are available in RGBW, monochromatic and tunable white versions with tilt angle adjustment.
All models are dimmable.
TERRAGON is available in lengths of 31cm, 56cm and 106cm, with two voltage options, Constant Power models at 24VDC and
High Efficient models from 24VDC up to 48VDC.
At ELECTRON we value each and every customer, and we want to thank you for your purchase of TERRAGON. We believe that this
manual will serve as a useful guide and resource for you, and we look forward to hearing your feedback.
Please note that before using this equipment it is mandatory, for safety reasons and for the proper use of TERRAGON, to read
carefully this user manual.
Reproduction of all or part of this user manual, in any form, is not allowed without prior written authorization from Electron SA.
Electron SA reserves the right to make any changes in this user manual without any prior notice

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TERRAGON 80 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Electron TERRAGON 80

Summary of Contents for Electron TERRAGON 80

  • Page 1 High Efficient models from 24VDC up to 48VDC. At ELECTRON we value each and every customer, and we want to thank you for your purchase of TERRAGON. We believe that this manual will serve as a useful guide and resource for you, and we look forward to hearing your feedback.
  • Page 2 • The luminaire must be connected only by a qualified electrician. • The supply input of multichannel TERRAGON 80 models (RGBW, Tunable white) is common anode and the appropriate power supply and controller should be used. • Dimming can be accomplished by PWM (up to 2kHz) on power supply input.
  • Page 3 56cm 504 mm TERRAGON 80 5,00kg 106cm 1004 mm 7,50kg Table 1 Recessed Flat Recessed ELECTRON SA, PROFESSIONAL LIGHTING SYSTEMS 7klm National Road Athens – Lamia, 68 Antiohias Str, N.Philadelphia, 143 41 Athens, Greece, Tel. +30 210 2584240, info@electron.gr, www.electron.gr...

  • Page 4: Installation

    Remove the protecting plug and install an electrical tube in the pre-arranged position (a), then pass the necessary cables through. ELECTRON SA, PROFESSIONAL LIGHTING SYSTEMS 7klm National Road Athens – Lamia, 68 Antiohias Str, N.Philadelphia, 143 41 Athens, Greece, Tel. +30 210 2584240, info@electron.gr, www.electron.gr...

  • Page 5: Recessed Installation

    Styrofoam can be removed, and the provided luminaire holders can be installed in place. ELECTRON SA, PROFESSIONAL LIGHTING SYSTEMS 7klm National Road Athens – Lamia, 68 Antiohias Str, N.Philadelphia, 143 41 Athens, Greece, Tel. +30 210 2584240, info@electron.gr, www.electron.gr...
  • Page 6 30° in total, from -15° to +15°. ELECTRON SA, PROFESSIONAL LIGHTING SYSTEMS 7klm National Road Athens – Lamia, 68 Antiohias Str, N.Philadelphia, 143 41 Athens, Greece, Tel. +30 210 2584240, info@electron.gr, www.electron.gr...

  • Page 7: Power Supply

    Table 3 Power Supply. • The TERRAGON 80 Series is available with two voltage options, 24VDC and 24~48VDC, please check the label of the fixture, in order to verify the input voltage. • In Tunable white and RGBW models the positive pole is common for all channels. Thus, the controller or power supply that is going to be used for these models must be Common Anode.

  • Page 8: Electrical Connection

    When all the wiring is done then the luminaire can be placed into the mounting box. Connect the first TERRAGON 80 module to the power supply cable as shown below (a), if more than one luminaire must be installed in the same line (in-out) then the extension cable and IP68 connectors must be used (refer to the catalog page). For the more information about the maximum length that can be achieved, refer to the TABLE 5.

  • Page 9: Technical Specifications

    Table 4 Maximum power of TERRAGON 80 in daisy chain connection. TERRAGON 80 models offer input - output cabling (available upon request) thus, daisy chain connection can be used. As a result, only the first luminaire has to be power supplied.

Table of Contents