Electron BASELINE V MILKY LED Installation Manual

BASELINE V MILKY LED
Baseline V Milky LED is a fully encapsulated Vertical bending flexible linear LED.
Ÿ
Available in Pro or Standard Version.
Ÿ
Material: Silicone
Ÿ
Bin Step: Monochromatic White LEDs Silicone: 2SDCM
Ÿ
Available Single Coloured High Efficiency models.
Ÿ
Available in RGBW and TW.
Ÿ
L70B10>50000Hrs
Ÿ
Available in IP67 protection rate.
Ÿ
CRI>90 for 2700/3000/3500/4000K
Ÿ
Possibility to create straight or curved lines.
Ÿ
Can be used both indoor and outdoor.
Ÿ
Dot free lighting effect.
Ÿ
IK 08 Protection.
Ÿ
Can ideally be used with surface aluminium profile.
Ÿ
Max length with single supply:
Monochrome: 17m (connection IM IP67), 10m (connection IP67)
Ÿ
High Efficiency, TW: 5m
Ÿ
RGBW: 10m (connection IM IP67), 5m (connection IP67)
Ÿ
Lighting management options:
On-Off/DALI/0..10V/1..10V/DMX512/PHASE CUT/IR/RF/PUSH BUTTON/Bluetooth
UV Resistant
Chemical Resistant
> Please verify the contents of the packages.
> Please read the instructions entirely before starting installation.
> Be sure power is turned off before installing the system.
Warnings: risk of product damage
> BASELINE V must not be bent at less than 240mm, or damage will result.
> Do not allow BASELINE V to twist or bend in the wrong direction.
> During the installation, the BASELINE H can not be: Dropped, Bent at a 90 angle or bent at all, Sagging/Hanging down
Dimensions
Bending
Vertical bending
Do not hang
16mm
Cutting points: Single & TW every 50mm, RGBW every 125mm
Please confirm with the C
15mm
Note: Cutting the product without the appropriate endcap and tools by a non-authorized person
15mm
16mm
Light Surface
Do not Bend too tight
ELECTRON SA, PROFESSIONAL LIGHTING SYSTEMS
68 Antiohias Str, N. Philadelphia, 143 41 Athens, Greece, Tel. +30 210 2584240, Fax. +30 210 2584245, info@electron.gr, www.electron.gr
o
sign on the rear side of the modules
will result to a loss of the IP protection, causing water leakage and failure.
Light Surface
Installation Manual
Installation note
BASELINE V must be installed with two people. One to press the
luminaire into the profile and the other to hold the reel and unroll
it while keeping the BASELINE TWIST flex body straight.
1