Biostar GF8100M2TE Manual page 6

GF8100 M 2+ TE BIOS Manual
Change the AHCI DID for Linux
T his item appears only when SA T A mode is set to AHCI.
Options: Disabled (Default) / Enabled
Primary IDE Master/Slav e ; SATA 1/2/3/4 Device
Main
Primary IDE Master
Device :
Type
LBA/Large Mode
Block (Multi-Sector Transfer)[Auto]
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
T he BIOS detects the information and values of resp ective devices, and these
information and values are shown below to the name of the sub-menu.
Type
Select the type of the IDE/SAT A drive.
Options: Auto (Default) / CDROM / ARMD / Not Installed
LBA/Large Mode
Enable or disable the LBA mode.
Options: Auto (Default) / Disabled
Block (Multi- Sector Transfer)
Enable or disable multi-sector trans fer.
Options: Auto (Default) / Disabled
PIO Mode
Select the PIO mode.
Options: Auto (Default) / 0 / 1 / 2 / 3 / 4
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
5
Select the type
of device connected
to the system.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit