Subscribe to Our Youtube Channel
Related Manuals for Zanussi ZEDB7002
Summary of Contents for Zanussi ZEDB7002
- Page 1 ELECTRIC BLANKETS Model Number: ZESB7001 / ZEDB7002 / ZEKB7003 For Customer Services & Spare Parts please call 0330 1230 597 Or visit us at zanussiheatingandcooling.uk PLEASE RETAIN FOR FUTURE REFERENCE...
-
Page 2: Table Of Contents
CONTENTS Page(s) Safety Instructions Securing Your Blanket to the Bed Feature Diagram Using your Blanket 11-13 Cleaning and Care 14-16 Problem Solving Guarantee and Customer Services Connection to the Mains Supply Specification Notes 21-23 Disposable Information... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be observed, including the following: • Read all instructions. • Retain for future use. • Check that your mains voltage corresponds with the rating on the appliance. • To protect against electrical shock do not immerse cord, plug, or appliance in water or other liquid. - Page 4 SAFETY INSTRUCTIONS • This appliance is not intended for commercial use • This product is intended for household use only. Not intended for use in hospitals. • Do not use outdoors. • This product is only intended for heating. • If overheating should occur, the built-in overheating safety device will shut the appliance off.
- Page 5 SAFETY INSTRUCTIONS • Do not tuck in. • Do not insert pins. • Use only for human use, not for pets • Warning: It is hazardous for anyone other than a competent person to carry out any service or repair operation which involves the removal of a cover which gives protection against exposure to electrical parts.
- Page 6 SAFETY INSTRUCTIONS • Arrange the blanket so that it is not beneath pillows and / or bolsters. • Long periods of use at the high setting can result in skin irritation or burns. • Keep control unit away from an open window. •...
- Page 7 SAFETY INSTRUCTIONS • Clean this blanket only as per instruction supplied with this blanket. • The appliance is only to be used with the type of control unit marked on the appliance. • Avoid creasing the appliance by placing items on top of it during storage.
- Page 8 SAFETY INSTRUCTIONS Electrical Safety THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET • Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 220 – 240V AC;...
-
Page 9: Securing Your Blanket To The Bed
SECURING YOUR ELECTRIC BLANKET Note: • Use only as an under blanket and do not use above the occupant of the bed. • This product can be used with any type of bedding including waterproof bed protectors. • Tuck this blanket securely to the mattress. •... -
Page 10: Feature Diagram
FEATURE DIAGRAM 1. Electric blanket 4. Skirt (this is located on 2. Detachable power cord the side of the blanket) 3. Controller... -
Page 11: Using Your Blanket
USING YOUR ELECTRIC BLANKET Controls Note: On initial use it is recommended that the blanket be set on setting ‘9’ for 30 minutes before sleeping on the bed and then set to setting ‘1’ for continuous use. Preset on ‘9’ will assist in drying out any moisture which has been accumulated in the mattress. - Page 12 USING YOUR ELECTRIC BLANKET 1. Ensure the blanket is fitted to the bed correctly, see the Securing your electric blanket section. 2. Plug the power lead into the closest socket, using an extension lead, if needed, to ensure that the lead is not stretched. 3.
- Page 13 USING YOUR ELECTRIC BLANKET Safety Protective Devices The appliance is fitted with an over heat protection system The system will remain dormant indefinitely as long as the blanket is operating in the normal temperature range. If, for any reason, the blanket is operated in an abnormal situation or condition which would otherwise have induced a rapid temperature rise high enough to constitute a hazard, the over heat protection should intervene by cutting off the supply...
-
Page 14: Cleaning And Care
CLEANING AND CARE WARNING: Electrical Shock Hazard. Note: Before cleaning, ensure the control is set to the ‘0’ Position (OFF) and remove the plug from the wall socket. Note: Do not allow the controller to come in contact with any wet solution. - Page 15 CLEANING AND CARE Washing instructions Only use the below instructions: • Hand wash or spot clean • Do not machine wash above 40°c • Do not tumble dry • Do not wring • Do not bleach • Do not dry clean •...
- Page 16 CLEANING AND CARE • Rinse the blanket thoroughly in clean fresh water. • Unfolded the blanket and allow to dry naturally. Hand Washing • Immerse the blanket only (do not allow the controller to come in contact with any wet solution) in a luke warm neutral detergent or mild soapy solution.
-
Page 17: Problem Solving
PROBLEM SOLVING My appliance does not work when I turn it on: 1. Check that your appliance is plugged in and the power is turned on at the mains socket. 2. Try another mains socket. 3. Check that the control has been set to the correct setting and is not in the off position 4. -
Page 18: Guarantee And Customer Services
• This warranty does not cover wear and tear, damage, misuse or consumable parts. This does not affect your statutory rights. ZANUSSI is a registered trademark used under license from AB Electrolux (publ). Made by Product Care Trading Limited, Wigan, WN2 4AY/ PCT (NI) Ltd, Belfast, BT5 5AD. -
Page 19: Connection To The Mains Supply
CONNECTION TO THE MAINS SUPPLY This appliance is designed to operate from a mains supply of 220-240V~50Hz. Check that the voltage marked on the product corresponds with your supply voltage. How to change the fuse 1. Slot the end of a screwdriver into the recess in the fuse holder of the plug. -
Page 20: Specification
Model number ZESB7001 Rated voltage 220V - 240V ~ 50Hz Power consumption Product dimensions (CMS) (W)107 x (L)203 Model number ZEDB7002 Rated voltage 220V - 240V ~ 50Hz Power consumption 2 x 60W Product dimensions (CMS) (W)135 x (L)190 Model number... -
Page 21: Notes
NOTES... - Page 22 NOTES...
- Page 23 NOTES...
-
Page 24: Disposable Information
ZANUSSI is a registered trademark used under license from AB Electrolux (publ). Made by Product Care Trading Limited, Wigan, WN2 4AY/ PCT (NI) Ltd, Belfast, BT5 5AD. For Customer Services & Spare Parts please call: 0330 1230 597 Or visit us at zanussiheatingandcooling.uk The ‘wheelie bin’...
Need help?
Do you have a question about the ZEDB7002 and is the answer not in the manual?
Questions and answers