Related Manuals for BASI mySafe Fingerprint 350
Summary of Contents for BASI mySafe Fingerprint 350
- Page 1 Fingerprint 350 / 450 High intensive alarm function 2 emergency keys included back up power supply included OPERATING MANUAL facebook.com/BASIGmbH @basi_gmbh www.basi.eu...
- Page 2 Any use outside the narrow limits of Slight soiling of the electronic furniture copyright law without the consent of safe can be removed with a damp cloth. BASI GmbH is not allowed and is liable to prosecution. Disposal This applies in particular to duplications,...
- Page 3 1 Light (yellow, green, red) 2 Plate 3 Fingersensor 4 Emergency keyhole 5 Emergency keys 6 Battery-power check inlet 7 Battery backup system 8 Built-in battery box Reset button...
-
Page 4: First-Time Operation
First time operation Opening & closing the safe Open with the emergency key Opening 1. Uncover the plate at the bottom of the safe to reveal the emergency keyhole 1. Enter your fingerprint. You will hear and battery-powered jack inlet. 1 beep, and yellow light will turn on, 2. -
Page 5: Low Battery Level
– If mounting the save onto a wall, print. Afterwards it has to activated ensure that the wall is structurally again. secure. 5. The alarm can be triggered with a closed as well as with a closed door. Battery Low battery level If the green and the red light flashes at the same time, when scanning your fingerprint, the battery level is low. - Page 6 This publication, including all its parts, is protected by copyright. Any use outside the narrow limits of copyright law without the consent of BASI GmbH is not allowed and is liable to prosecution. This applies in particular to duplications, translations, microfilming and importing and processing in electronic systems.
Need help?
Do you have a question about the mySafe Fingerprint 350 and is the answer not in the manual?
Questions and answers