KZ ZSN PRO X Manual

Maintenance

1. The device may only be used by qualified personnel, damage caused by improper use or attempted repair is not covered by the warranty. There are no service parts inside the packaging, repairs may only be carried out by authorized service center.
2. Do not allow the device to come into contact with oil, grease or any similar liquid.
3. Regular cleaning allows you to use the device for a long time and maintain a sufficiently high performance. Use a soft cloth to clean the device.

Technical specification

* Due to factors such as measurement environment and temperature, it is normal if there are slight tolerances on product parameters.

Product features

• 30095 hybrid technology drive metal earphones
• 10 mm dual magnetic moving coil
• 100 core high-purity silver-plated wire reducing loss and distortion in signal transmission
• Unique color matching due to metal and resin mix
• Rich low-frequency power
• Wide frequency response
• Tuned and fused by professional and scientific acoustic team
• Rich and clear details of human voice
• Effective isolation of external noise
• Curved cavity
• Ergonomic design
• 0.75 mm gold plated pin
• Supports the additional Bluetooth module
• Can be easily upgraded to a wireless headset

Device operation

Wire plugging

Correctly distinguish Right and Left headphones and wires, as shown. There are left and right logos on the wire, "L" is on the left, and "R" is on the right. The front of the headset is placed with the silicone sleeve facing left to the left and the silicone sleeve facing to the right, which is the right side.

The correct assembly of the wire is with the needle head and "L R" logo facing up. Do not assemble the pinhead down, and it will harm sound quality.

Point the wire to the plug and push it in until it fits perfectly.

Since the wire is a design that does not easily come off, please be careful when inserting or pulling.

Headset wearing

Correctly distinguish right and left headphones, "L" for left, "R" for right.

Straight headphones inserted into the ear, correct wear, comfortable wear, excellent sound insulation performance.

Fix the headset wire behind the ear.

Press and hold the headset panel to adjust the seal.

Adjust earphone wire and fix earphones.

Plug the headset plugs into the play-back device and use it to adjust the volume before the headset is plugged into the device.

Safety rules

	Please read the user manual in detail before use. Please also keep it for future reference. The manual contains rules for the safe use of the device.
	After receiving the product, please unpack and check whether it is complete and whether there is any damage caused by transportation. If there is damage caused by transportation, please do not use this product and contact the dealer or manufacturer as soon as possible.
	The product described in this manual comply with European directives and it is therefore CE marked.
	Keep the device away from children and unqualified persons. The manufacturer is not liable for damage caused by improper use.
	Before use, make sure the housing is not damaged!
	Do not operate for a long period of time at a high volume level!