KZ T10 - Wireless ANC Headphones Manual

Headphones safety precautions

To reduce the risk of fire, electric shock, or product damage, the followingpoints should be noted:

• Keep the earphones away from rain and moisture.
• Please use the recommended attachment.
• Do not remove the headphones cover.
• Do not repair your headphones by yourself. Please contact the qualified service personnel for the repairs
• Avoid using or placing headphones near the heat source.
• Do not use your headphones to listen at high volume where the ambient sound needs to be heard to be safe (such as a railway intersection or construction site).
• Please follow the airline's instructions when using headphones in flight. You may not be allowed to use it on some flights. Please contact your upcoming flight for more details.

Precautions for listening with headphones

• Excessive sound pressure from headphones can cause hearing damage.
• Do not use headphones at a high volume. Hearing experts advise against listening to earphones for long periods of time.
• If you feel ringing in your ears, lower the volume of your headphones or stop using it.
• Do not use headphones while driving. Because it can cause an accident and is illegal in many areas. In the event of a possible accident, you should exercise extreme caution or temporarily discontinue use it.

Please use the attached USB charging cable when connecting the computer.
Wireless headphones may be disturbed by the radio waves of the mobile phone during use. If this interference occurs, put the mobile phone away from the headphones.

Safety of battery

• Do not disassemble, bump, squeeze or throw battery into fire.

• Do not continue to use if there is serious swelling on battery.
• Do not place battery in high temperature environment.
• Do not use after the battery is soaked in water!

Maintenance of headphones

• Please clean the headphones with a soft dry cloth.
• Do not use solvents, including gasoline, dilutions, alcohol, kitchen detergent, chemical wipe cloth, etc. This may cause external deformation or coating shedding.

Attachment list

Safety of charging

The headphone has a built-in rechargeable battery. Please fully charge the battery before using the earphone to ensure the best battery power and life. Connect the headphones to the charger using the original charging cable (attached). Check the plug direction, hold the plug, insert and pull out flat. (If the plug is tilted or inserted in the wrong direction, the plug may deform, resulting in failure).* For better battery life, please fully charge the battery when the earphone is stored for a long time.

Component name

Power on / off

Power on

Push the power button to the ON position

Power off

Push the power button to the OFF position

Bluetooth connection pairing

1. Place the Bluetooth device to be connected within 10 meters of the headphone.
2. After the headphone is turned on, push the power key to the top, the headphone enters the pairing state.
3. Turn on bluetooth device to search and connect [KZ-T10].
   
   
4. Headphone is successfully paired with the player device when you heard "Connected".
5. After the first pairing, the headphone will automatically connect to the player each time when it is turned on. *Ensure Bluetooth of the player is turned on; otherwise, the automatic connection will be fail.
6. If the connection is disconnected due to exceeding the transmission distance, it can be automatically reconnected within 3 minutes. When the headphone is disconnected, the LED blue light flashes once for every 3 seconds.
7. The headphone will automatically shut down after 5 minutes if they are not successfully connected to the player device.
8. Hold down ANC +MFB buttons for 3 seconds to remove pairing information of headphones.
   

How to reset the headphone

*Clearing the headphone pairing information can solve most problems such as unsuccessful headphone connections. Long press ANC +MFB button for 3 seconds, the red and blue lights on for 2 seconds, and the reset is successful.

Music mode

Volume up
Turn the wheel clockwise to increase the volume
Volume down
Turn the wheel counterclockwise to lower the volume
*There will be a prompt when the volume is set to maximum or minimum.

Last song/ Next song

Double-click the ANC key to switch to the last song. Click the ANC key to switch to the next song.

Calling mode

Pick up / Hang up

Click MFB button to answer a new call. Click MFB button again to end the current call.

Three-way calling
Double-click MFB button to remain the current call and answer the new call. In a three-way call, double-click MFB button to switch between the current call and the reserved call. In a three-party call, press MFB button to end the current call and switch to the reserved call.

Active noise-cancellation mode

Volume and sound quality will be changed when ANC mode is turned on.

• About active noise-cancellation mode
  You can choose one of the following modes according to your preference.
  • Default mode is set to Normal Mode.
    1. Ambient Mode
    2. ANC Mode
    3. Normal Mode
       *When switching to different mode, you may hear very slight noise, thisis normal and does not indicate any product fault.
• How to switch between Ambient/ANC /Normal Mode
  
  Long press ANC button for 2 seconds to switch between 3 models.
  

Specification

Note: This manual is for reference only and subject to change without prior notice.