Translation of the original operating instructions Flat Face Male tips FC Series Designation: QRC-FC-...-M-... Contents Preliminary remarks ....................... 2 Compatibility ........................2 Before coupling ......................2 Connecting the coupling halves ..................3 In operation ........................5 Disconnecting the connection ..................5 Replacing the seal ......................
1. Preliminary remarks Please read the operating instructions for the FC series flat face male tip coupling carefully. The selection of the coupling series for the respective application with regard to the operating conditions (pressures, temperatures, media) must always be carried out by specialised personnel.
Incomplete connection of the coupling halves can result in the male tip and female body coming loose during operation. Seals may be destroyed and leaks may occur in the coupling. The FC series male tips are designed for occasional coupling under residual pressure. 3 / 6 www.stauff.com...
Page 4
16 mm / 5/8" 19 mm / ¾" 25 mm / 1" QRC-FC-10-M... QRC-FC-12-M... QRC-FC-16-M... QRC-FC-19-M... QRC-FC-25-M... STAUFF designation Maximum residual pressure on the 250 bar 250 bar 250 bar 250 bar 250 bar male tip when engaging, female 25 MPa...
8. Notes and contact information Note: Any disassembly of individual coupling halves (male tip/ female body) will invalidate the warranty!!! Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl +49 2392 9160 +49 2392 916 103 sales@stauff.com www.stauff.com 6 / 6 www.stauff.com...
This manual is also suitable for:
Qrc-fc m seriesQrc-fc-10-m seriesQrc-fc-12-m seriesQrc-fc-16-m seriesQrc-fc-19-m seriesQrc-fc-25-m series
Need help?
Do you have a question about the FC Series and is the answer not in the manual?
Questions and answers